Sportster XLCH 1000 Electric Start

Black finish electric starter block off plate is used when starter assembly is removed. Fits:XLH 1970-1978 Starter assembly is removedXLCH 1970-1978Additional Information

Zinc upper horn and choke bracket Fits:XL 1972-1985Additional Information OEM No.69129-72A UOM1 - EA<

2 piece front lower motor mount plates features a chrome finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information OEM No.16210-52A

Top motor mount chrome 2 piece set for 1957-1976 XL Fits:XL 1957-1976Additional Information OEM No.16250-57 UO

Top motor mount chrome accepts molded coil and is not equipped with a key switch hole. Fits:XLH 1957-1977XL 1957-1977Additional Information UOM1

Top motor mount chrome accepts molded coil and is equipped with a key switch hole. Fits:XLH 1957-1977XL 1957-1977Additional Information UOM1 - E

Cast rear replacement is a two bolt style motor mount. Fits:XL 1967-1981Additional Information OEM No.16203-67

Front solo seat nose bracket feautures a flat black finish.Bracket mounts to frame casting in the hole behind the rear gas tank mount. *NOTE: On 1957-1978 XL models, the bracket fits over the 2 tabs...

V-Twin - 31-0033 - Left Side Tool Box Mount RawDescriptionLeft side tool box one piece mount is constructed of raw steel for Sportster hardtail and rigid frame applications.Must be welded in place...

Chrome goose style drag pipes have a diameter of 1-3/4" and a length of 34". Use with heat shields.Set includes channel mounts. *NOTE: Does not come with heat shields. **CAUTION: These exhaust...

Chrome drag pipes features a 28" long front pipe and 38" long rear pipe, that will mount with stock brackets.Sold in a quantity of 2. On the front pipe the down part is 15" and the rear to the start...

Exhaust drag pipe set with formed heat shields come with 1-3/4" slash cut and is 38" long.Set of two. The customer may remove the front header clamp from the heat shield, to use (2) matching header...

Upsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on rigid...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Muffler set is seamless custom type for Ironhead models. Include embossed lines on mufflers. Components available...

Alphabet Sportster exhaust header set features a raw finish. Set is used for Sportster Ironhead models.Set will fit stock Sportser models, including 1971-1984 models with forward controls and...

Alphabet Sportster exhaust header set features a black finish. Set is used for Sportster Ironhead models.Installation may not be compatible with some forward or mid controls. Front and rear header...

XL exhaust system includes 38" long tapered muffler set. The muffler sets have slider channels and mount with hanger bracket, which is included in the set, but will not fit on 1979 Sporsters.One...

Alphabet Sportster exhaust header set features a chrome finish. Set is used for Sportster Ironhead models.Set will fit stock Sportster models, including 1971-1984 models with forward controls and...

Black 2:1 alphabet exhaust header set includes rear, forward wrap around and radiused front, to fit into 2 into 1 turn out muffler end.Set will fit stock Sportster models, including 1971-1984 models...

Chrome 2:1 exhaust header set includes rear, forward wrap around and radiused front, to fit into 2 into 1 turn out muffler end.*NOTE: Turn out end not included. Fits:XLH 1971-1984 900cc, 100ccXLCH...

Ironhead LAF exhaust header set features a black finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. *NOTE: Exhaust header set is...

Ironhead LAF style header set features a chrome finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. Fits:XL 1957-1985Additional...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Componenets available separately. For kick and electric start models. Fits:XLCH 1957-1978XLH 1957-1978Additional...

Replica chrome header set.Set will accept heat shields. Order clamps and muffler separately. Fits:XLCH 1957-1978XL 1957-1978XLH 1957-1978Additional Information

Rear heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65702-68B

Front heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65728-66

Black 2:1 siamese hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames, and features a one piece design for Ironheads only.One piece header will...

Chrome 2:1 hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames. Features a one piece designOne piece header will require the installer to saw out...

Starter solenoid black plunger boot. Fits:FLT 1979-1982XL 1967-1980FL 1965-1982FX 1971-1982Additional Information OEM No.31441

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

Foam pad only for rear fender bracket.Use with bracket to reduce vibration between the fender and the frame. Fits:XL 1954-1978XLCH 1954-1978Additional Information

Stop tail lamp switch cap is made of rubber and protects the stop switch from moisture. Stock replacement type. Fits:XL 1972-1981FX 1972-1981Additional Information

V-Twin - 28-1997 - Black Solenoid Plunger Rubber BootDescriptionSolenoid plunger boot fits 1965-1988 solenoids. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

Top bushing set Fits: FXD 1991-2005 FXR 1988-1994 XL 1954-1999 Additional Information UOM 1 - KIT

39mm rubber sleeve for 38mm flatslide carburetors. Fits:FX 1971-1984FL 1966-1984XL 1963-1984Additional Information UOM1 - EA

Black rubber fork boot 33mm is designed for a better fit and improved sealing and wiping action.Sold in a quanity of 2. Fits:XL 1971-1972FX 1971-1972Additional Information

Replica orange handlebar grip seat is 1-1/8" on both sides. Fits:FL 1962-1972XL 1962-1972Additional Information UOM1 - SET

V-Twin - 28-0673 - Solid Mount Kit ChromeDescriptionChrome solid mount kit is to replace rubber bushings and cap washers.Order bolt set separately. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL...

XLCH fudgesicle kick pedal rubber features a black finish. Fits:XL 1957-1979Additional Information UOM1 - EA M

AEE rubber shock bushings are for Big Twin models and are stock OE replacement type.Sold as a pack of 4. Fits:FX 1971-1972XL 1954-1974FL 1958-1984Additional Information <