Sportster XLCH 1000 Electric Start

This V-Fire Tuneable Ignition Advance Assembly includes a st ainless advance base, points plate with "Blue Streak" points , and condenser with hardware.Three pairs of color coated springs are also...

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Button style handlebar starter or horn switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.

Button style handlebar switch is for front brake and comes without wire. Thread is 1/4-32. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

Plain Rocker style handlebar switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM10 - PK

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

V-Fire ignition advance unit features stainless steel base, heat treated weights, and cam center screw for 1970-up mechanical advance ignition. Fits:FX 1971-1978FL 1970-1978XL 1970-1978Additional...

Relay to ground wire. Fits:XL 1970-1980FXE 1971-1978Additional Information OEM No.70169-70 UOM

Zinc horn bracket for left side Fits:XL 1952-1984Additional Information OEM No.69031-57 UOM1 - EA

V-Twin - 31-4057 - Exhaust Bracket ChromeDescriptionChrome exhaust bracket is for mounting drag pipes on mufflers with the use of T bolts.Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits...

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsUse mount kit for smaller type solos such as K or CH types. Fits:XL 1952-1978Additional Information

Black exhaust support tube mounts drag pipes or stock mufflerrs system to 1958-1979 XL-XLH models Fits:XL 1958-1978Additional Information OEM No.65316-65

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra...

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is...

Stainless steel exhaust clamps are designed with a heat treated T bolt and self locking nut.Sold in a quantity of 2. ...

Chrome front clamp pipe with angle.Clamp has an inner diameter of 1-3/4". Fits:XL 1958-1978Additional Information OEM No.65514-58

V-Twin - 31-1966 - Linkert Carburetor Mount Bracket Zinc PlatedDescriptionLinkert carburetor mount bracket features a zinc plated finish. Fits:XL 1957-1972Additional Information

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the...

Zinc plated horn mount bracket for XLCH models. Fits:XLCH 1965-1985Additional Information UOM1 - EA Manufactur

Black 2 bolt license plate bracket for fender mounting. Fits:FX 1971-1972GL 1955-1972XL 1955-1972Additional Information UOM1 - EA<

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler...

Carburetor support bracket features a zinc plated finish.For Bendix an Keihin butterfly carburetors only, not for CV type. Fits:FL 1972-1984FLT 1985-1992XL 1972-1987Additional Information

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional...

2 piece front lower motor mount plates features a black finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information UOM1 - SET

Raw side mount tail lamp bracket is best used with a vertical plate, for XL models. Fits:XL 1971-1985Additional Information UOM1 - EA

Chrome side mount tail lamp bracket is best used with a vertical plate, for XL models. Fits:XL 1971-1985Additional Information UOM1 - EA <

Regulator rectifier mount is for a 12 volt Bosch generator and has a chrome finish. Fits:XL 1958-1978FL 1958-1969Additional Information UOM1 - E

Chrome seat spring support bar Fits:XL 1957-1978Additional Information UOM1 - EA Measurements

Zinc plated carburetor support bracket mounts to air cleaner backing plate.Mounts to mount stud at tappet base. Fits:XL 1957-1985Additional Information OEM

Zinc carburetor cable bracket. Fits:XL 1972-1973Additional Information OEM No.27449-72 UOM1 - EA

Stainless steel exhaust header clamp set.Sold in a quantity of 2. Fits:XL 1957-1978K 1952-1956Additional Information OEM No.65519-52<

Saddlebag bracket set chrome are designed to fit the contour of the fender struts and protect your bags from the brake caliper and swingarm.Sold in a quantity of 2. Fits:XL 1952-1978Additional...

Solid State regulator mount bolts directly to 2-brush generator housings on Big Twin and Sportster models.Regulator mount fits Accel and V-Twin finned type regulators. Fits:XL 1958-1978FL...

Chrome bracket set for front fork triple tree spotlamp mounting includes both right and left sides.The mounting holes measures 7-1/4" from eye to eye. Fits:XL 1952-1985Additional Information

Rectifier-Regulator is stock OE replacement and has a zinc finish. Fits:XLCH 1970-1978Additional Information OEM No.74525-70

Chrome 2 bolt license plate bracket for fender mounting. Fits:FL 1955-1972FX 1971-1972XL 1955-1972Additional Information OEM No.59995-5

Top motor mount chrome bolts from the cylinder bracket to the frame. Fits:XL 1957-1976Additional Information OEM No.16251-58

Zinc horn mounting plate replaces stock OE. Fits:XL 1971-1985Additional Information OEM No.69117-71A UOM<

Chrome ignition coil mount bracket fits stock coil. Fits:XLCH 1971-1994XL 1971-1994Additional Information OEM No.31723-71A