Sportster XLCH 1000 Kick Start

85mm gauge bracket features a chrome finish. Fits:FL 1960-1972XL 1957-1972Additional Information UOM1 - EA

85mm signaled speedometer GPS includes chrome gauge bracket and black speedometer gauge with stainless steel bezel and red needle. Fits:FL 1960-1972XL 1957-1972Additional Information

Kit includes a 85mm GPS speedometer and a chrome bracket. Speedometer gauge reads 0-120 mph.The chrome bracket mounts to the handlebar riser clamp. Kit includes red generator and blue hi-beam...

Kit includes 85mm GPS electric tachometer and a chrome bracket. Tachometer is 12 volt and operates from a coil impulse.The chrome bracket mounts to the handlebar riser clamp. Kit includes red...

XL tachometer kit includes mount bracket to mount to XL handlebar mount.Kit includes OEM HD tachometer that is manufactured in Italy. The tachometer drive is located inside the cam cover. Fits:XL...

Set of weld on mounts for models with stock mounting holes features a raw steel construction. Fits:XL 1957-1978Additional Information UOM1 - SET

Gas tank has a left side petcock opening, and a fuel capacity of 3.2 gallons.Kit features dual cap type tank with a smooth top and includes mount bracket and necessary hardware for installation...

Gas tank is dual cap style with a left side petcock location, and a fuel capacity of 3.2 gallons.Kit has a one piece tank that will bolt to existing mounting holes. Includes three light dash cover...

Gas tank mount rear spacer. Fits:XL 1952-1981Additional Information OEM No.61135-57 UOM5 - PK

Front motor mount biter washer. Fits:XL 1952-1984Additional Information OEM No.16218-52 UOM5 - PK

Forged end kickstand pin. Fits:XL 1952-1983Additional Information UOM1 - EA FinishZinc

V-Twin - 37-9079 - Skull Pushrod Cover Cup Set GoldDescriptionGold plated skull pushrod cover cup set.Sold as a 4 piece set. *NOTE Gold plate is very delicate. Do not Polish. *No warranty or returns...

Chrome hex head primary cover filler and clutch hole cap are easily installed and removed with a standard 15/16" wrench. Fits:XL 1971-1976Additional Information U

Chrome die cast spark plug cover fits perfectly on a spark h ex for Big Twin 14mm pre 1999 models. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX 1971-1984FLT 1979-1999XL 1957-1985FL...

Stainless steel handlebar master cylinder cover screw Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.2628<

Zinc battery vent clamp has a 1/4" inner diameter. Fits:FXR 1982-1994FXST 1984-1996XL 1967-1996FX 1971-1978FL 1965-1984FXE 1971-1984FXD 1991-1996Additional Information

V-Twin - 37-8881 - Riser Cup Washer ChromeDescriptionChrome riser cup washer Fits:FXST 1984-UPFXR 1982-1994FXD 1991-2017FX 1973-1984XL 1962-UPAdditional Information

Kit includes nut, tapered spacer, lock washer, and chrome cap plug. Fits:FXR 1982-1988FX 1971-1984XL 1954-1988Additional Information UOM

Swivel tapered headlamp washers Fits:XL 1959-1995FX 1971-1984Additional Information OEM No.67815-59A

Zinc Ignition points plate mount screw set include washer assortment.Set includes (2) 8-32 x 1/2" long round head slot screws, (2) #8 flat washers and (2) #8 lock washers. Fits:FX 1971-1978FL...

Horn cover mount hardware includes 3 screws, 3 lock washers, 3 nuts, 1 speed nut and 1 spacer. Used to mount FX and FL horns. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST...

Drain plug is 1/8" National Pipe Thread, and can be used on a variety of applications.Plug can be used on lower fork sliders for FLH models and rocker arm covers, crank case, gear case, and oil pump...

Stainless steel exhaust header clamp bolt. Fits:XL 1957-1985FL 1948-1965Additional Information UOM1 - KIT

Brake rod adjuster nut Fits:XL 1957-1978K 1952-1956Additional Information OEM No.42264-52 UOM

Chrome primary cover cap set is for filler and clutch adjustment holes on XL models. These are machined smaller for special application.*NOTE: Threads are clearanced for fitting for installation on...

Polished primary cover cap set is for filler and clutch adjustment holes on XL models.*NOTE: For use with polished outer covers. ...

XL starter screw is stainless steel, round head and slotted that measures 1-64 x 1/4". Fits:XL 1967-1980Additional Information UOM10 - PK

V-Twin - 37-2096 - Phillips Head Chrome ScrewsDescriptionChrome 5/16"-24 phillips head screws for air cleaner and luggage rack applications. Fits:FXST 1984-1989FX 1971-1984WL 1941-1952UL 1941-1948FL...

Footpeg male bolt kit includes standard hex bolt and nyloc nut. 4 piece kit is zinc plated.Hex bolts are 3/8"-16 X 1-1/2". Nyloc nuts are 3/8 x 16. Fits:FXR 1982-1994XL 1969-1984Additional Information

M8 x 1-1/4mm x 40mm allen cap screw set for wide clamps.Sold as a pack of 10. Fits:XL 1957-1985FL 1948-1965Additional Information UOM10 -

Triple tree stem nut washer. Fits:FXR 1982-1986FX 1971-1984XL 1971-1986Additional Information UOM1 - EA

Domed fork stem nut with a chrome finish. Fits:XL 1952-1977Additional Information UOM1 - EA Manufacturer<

Rear motor mount bolt kit.Order studs separately. Fits:XL 1954-1981Additional Information UOM1 - KIT Man

3/8" Internal biter lock washers Fits: XL 1971-1984 Additional Information OEM No. 7130W UOM 25

Chrome stock type primary cover filler and clutch hole cap are easily installed and removable with a standard primary plug wrench.Threaded plugs are 1-1/2" x 12 and 1-3/8" x 12T, not undersize...

Allen type rocker arm shaft plugs have a chrome finish and includes sockets and cups. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR 1982-1983XL 1971-1984Additional Information

Clutch cable in braided stainless steel with clear coat fits Sportster models.Stainless steel braided with clear coat clutch cable has a PVC sleeve. The braid is tightly woven for a bright, quality...

Cable kit is for one side with pull throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing. Kit is pull type.*NOTE: Spiral uses 1-1/8" inner diameter grips...

Replica brake cable measures 60" with inner and outer housing. This cable can be cut to desired length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional Information

Tachometer drive gear assembly features a cadmium finish. Fits:XLH 1971-1980XLCH 1971-1980Additional Information OEM No.92097-71