Super Glide FX Kick Start

This oil fitting plug is chrome with a 1/4" National Pipe Thread. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX 1971-1984FLT 1979-1999XL 1957-1985FL 1968-1984Additional Information

This 90 , 1/4" National Pipe Thread gas and oil line fitting has a male pipe thread end, and is for a 5/16" inner diameter hose. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX...

This straight, 1/4" National Pipe Thread gas and oil line fitting has a male pipe thread end, and fits a 5/16" inner diameter hose. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX...

This straight, 1/8" National Pipe Thread gas and oil line fitting has a male pipe thread end, and fits a 1/4" inner diameter hose. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX...

Straight barbed oil line fitting is for 3/8" hose.Nut measures 7/16". Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX 1971-1984FLT 1979-1999XL 1957-1985FL 1968-1984Additional Information

Oil pump to line fitting set has a cadmium finish.Set of two. ...

Kit includes chrome swingarm oil tank, chrome cap assembly, mounting kit and drop-in oil filter.The cap assembly includes retaining ring and gasket. Mounting kit includes zinc plated bolts and...

Nugget oil gauge fitting only for 1971-1985 has 1/2"-20 thread. Fits:FL 1971-1984XL 1971-1985FX 1971-1984Additional Information UOM1 -

Oil cooler kit includes billet dual tube vertical oil cooler with billet mount clamps and measures 10" long and 4-1/8" top diameter.Includes stainless lines and four chrome seal ends. This kit does...

Our V-Twin drop in oil filter includes spring, o-ring and a one piece filter.This oil filter carries the stringent TUV and ISO certifications. The finest materials from around the world go into each...

Lower retainer for filter elements. Fits:FL 1965-1981XLH 1957-1978FX 1971-1981Additional Information OEM No.63846-67

Single gauge kit with a chrome early type housing features a GPS signaled speedometer and coil triggered tachometer.The chrome bracket mounts to the handlebar riser clamp. *NOTE: Must order red...

Police special speedometer has a ratio of 1:1 and features a replica white face with black 0-100mph numbering and gold highlights and Stewart Warner wing graphics.Face diameter is 3-7/8". *NOTE:...

Kit includes lens and hardware, 6-post switch, choke cable and knob, mounting hardware and trim strips.Can be adapted to all 3.5 and 5.0 gallon tanks. Dash base is plain, unwired. Spacer kit is...

Police special speedometer has a ratio of 1:1 and features a replica Stewart Warner black face with a red needle and white numbers reading 0-120 mph.Speedometer features a male fitting on the back of...

Speedometer has a 1:1 ratio and features a gold background. The face is black with green numbers reading 1-12 mph x 10 and the needle is red.Speedometer features a male fitting on the back of the...

V-Twin - 39-0769 - 1968-1970 Speedometer with 1:1 Ratio Description Speedometer has a ratio of 1:1 and features a black face with silver numbers reading 0-120 mph and a red, white and black needle...

Police special speedometer has a ratio of 1:1 and features a black face with white needle and white numbers reading 0-120 mph.Speedometer features a male fitting on the back of the speedometer for...

Speedometer is for a Fat Bob and has a ratio of 1:1. Features a black background with white numbers reading 0-120 mph and a red, white and black needle.The lens has a 4-1/4" diameter and accepts a...

Tombstone style speedometer has a ratio of 1:1 and features a black background with silver numbers reading 1-12 mph x 10 and a red needle.Includes a chrome set trip knob. Speedometer features a male...

Speedometer has a ratio of 1:1 and features a gold background. The face is black with green numbers reading 10-120 mph and the needle is red.Speedometer features a male fitting on the back of the...

Police Special speedometer has a ratio of 1:1 and features a black face with white numbers reading 10-100 mph and a white needle.Speedometer features a male fitting on the back of the speedometer for...

Description AMF gas tank emblem set features aluminum construction with black painted lettering with mount screws included.Assembly with old imported components. Fits: FX 1972-1975 FL...

Bobbed 5 gallon gas tank features brackets welded in place to accept 1963-1965 emblems. Set include Eagle Iron brand emblems and chrome cap set. Gas tank accepts left side 22mm petcock with nut.For...

V-Twin - 38-0627 - 1966 Fat Bob Gas Tank Set 3.5 GallonDescriptionBobbed gas tank set has a fuel capacity of 3.5 gallons. Includes emblem mounts welded in place, 1966-1971 emblems with screws and a...

Transmission bearing retainer screws measure 1/4"-24 x 13/16" and features a zinc finish.Sold as a pack of 10, in a Zinc finish. Fits:UL 1937-1948FX 1971-1979EL 1936-1940FL 1941-1979Additional...

Hex type screw is 1/4" x 20 x 1-1/4". Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.3993<

Alternator mount screw with lock patch is 10-24 UNC x 1". Fits:FL 1970-1984FX 1970-1984FXST 1984-1986FLST 1986-1986Additional Information

Chrome slotted transmission fill plug. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information UOM1 - EA

Slotted transmission fill plug. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information UOM1 - EA

V-Twin - 37-9079 - Skull Pushrod Cover Cup Set GoldDescriptionGold plated skull pushrod cover cup set.Sold as a 4 piece set. *NOTE Gold plate is very delicate. Do not Polish. *No warranty or returns...

Stock oil pump plug with slot Fits:FX 1971-1980FL 1968-1980Additional Information OEM No.26377-68 UOM

Chain tensioner screws has phillips flat head Fits:FXD 1991-2005FLST 1986-2006FXST 1984-2006FL 1965-1984FX 1971-1984FLT 1984-2005FXR 1984-1994Additional Information

Alternator mount screws with lock patch are 10-24 UNC x 7/8" . Fits:FL 1970-1984FXR 1984-1988FLT 1984-1988FX 1971-1984FXST 1984-1988FLST 1986-1988Additional Information

Chrome die cast spark plug cover fits perfectly on a spark h ex for Big Twin 14mm pre 1999 models. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX 1971-1984FLT 1979-1999XL 1957-1985FL...

Stainless steel handlebar master cylinder cover screw Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.2628<

Zinc battery vent clamp has a 1/4" inner diameter. Fits:FXR 1982-1994FXST 1984-1996XL 1967-1996FX 1971-1978FL 1965-1984FXE 1971-1984FXD 1991-1996Additional Information

Chrome oversize brake drum lug bolt set, 7/16"-20 thread is for the front or rear. Fits:FL 1941-1972UL 1937-1948FX 1971-1972WL 1936-1952EL 1936-1940Additional Information

Chrome transmission case vent screw Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.34720-5

Chrome acorn shifter shaft cover is for use with models with mid controls. Fits:FXD 1991-2005FX 1971-1984Additional Information UOM1 - EA