1972

Chrome 3/8" hole cup shock stud washers Fits:FX 1971-1984XLH 1972-1974FL 1965-1972Additional Information OEM No.54543-65

Chrome 5/8" hole cup shock stud washers Fits:XLH 1965-1974FX 1971-1972FL 1965-1972Additional Information UOM10 - PK

Lower shock zinc stud kit includes 4 cup washers and 2 studs. Fits:XL 1956-1974Additional Information OEM No.54516-72

Rear upper shock stud kit includes 4 cup washers and 2 studs. Fits:XL 1956-1974Additional Information OEM No.54515-56B

Lower rear shock stud kit includes four cup washers and two studs. Fits:FL 1967-1972FX 1971-1972Additional Information OEM No.54517-67

Upper rear shock stud kit includes four cup washers and two studs. Fits:FL 1967-1972Additional Information OEM No.54515-67

H-12 battery cast is plastic as original battery, with a removable top. Kit features a mock plastic top that will house most smaller batteries and mounts like an original battery.Mock battery box is...

H-12 battery top cover with terminals. Fits:FL 1965-1984XL 1967-1978Additional Information UOM1 - EA

Battery top set is a six piece set. Fits:FL 1965-1984Additional Information UOM6 - SET ManufacturerV-

V-Twin - 53-0501 - 12 Volt AGM H-12 Sealed Battery BlackDescriptionAbsorbed Glass Mat technology proposes the best balance between cold cranking amps and amp hour capacity.AGM battery is fully sealed...

16" x 3.0." rear wheel and brake drum assembly includes an all chrome wheel, brake drum, chrome backing plate and chrome axle kit.Order chrome brake arm separately. ...

16" x 3.00 rear wheel assembly with chrome hub and bearings installed, black rim, and chrome spokes.*NOTE: The valve stem hole is on the sprocket side. **NOTE: All spokes on wheel need to be...

16" x 3.00" front or rear KH style wheel assembly includes a black hub, zicad plated spokes and a black rim.*NOTE: Zicad is a dull shade of zinc similar to cadmium. *NOTE: All spokes...

Chrome 18" X 2.15" steel wheel rim features a full roll edge with weld in side.Rim features a rolled inner seam, features a bead construction with a width of 2.20". Valve stem center hole measures 8...

Replica chrome front 19" X 2.5" drop center wheel rim with 40 spoke holes and an 8.5mm center stem valve hole.Rim has original style edge. ...

KH replica chrome front conventional wheel rim.Early conventional KH rim, with a rolled inner seam, not welded. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to...

18" x 2.15" wheel assembly includes a 40 hole chrome rim, 21 cadmium spokes and a black rear hub, with all internal installed, laced and trued.Accepts a 400-450 x 18" tire. *NOTE: All spokes on wheel...

These rear wheel assemblies start with a 40 hole 18" x 2.5" chrome rim, single flange, 40 stainless spokes and a rear hub.Wheel is laced and trued. Accepts a 130-140 tire size. ...

Rear wheel assembly include a 18" x 2.5" chrome rim, 40 chrome spokes, and a rear hub. Wheel is laced and trued. Accepts a 130-140 tire size.NOTE: All spokes on wheel need to be inspected and...

This rear 18" x 2.15" wheel assembly includes a 40 hole chrome rim, 40 stainless steel spokes and a rear hub with bearings installed, laced and trued. Accepts a 130-140 tire size.NOTE: All spokes on...

Rear wheel assembly includes 18" x 2.15" chrome conventional style rolled rim, 40 chrome spokes and a rear hub. Wheel is laced and trued. Accepts a 100-120 tire size.NOTE: All spokes on wheel need to...

Features a 16" x 3.00" drop center rim with a large valve stem hole, 40 chrome twirled spokes and a hub with bearings installed.NOTE: All spokes on wheel need to be inspected and re-torqued after 500...

These rear wheel assemblies start with a 40 hole 16" x 3" chrome rim, 40 polished stainless steel spokes and a rear hub with bearings installed. Accepts a 130-140 tire size.NOTE: All spokes on wheel...

16" X 3.00" wheel assembly includes chrome hub, rim and stainless steel spokes.This wheel assembly also includes lock screw, seal spacer, tube spacer and one bearing. The hub must be supported by a...

Replica black powder coated front or rear 18" X 2.15" steel wheel rim. This is a WM type rim with welded beaded construction.Features conventional bead construction with a bead width of 2.20". ...

Includes a black hub, chrome rim and zicad plated spokes.Wheel assembly is laced, trued. The bearing kit inlcuded, includes the bearings, inner tube and outer nut with seal and spacer. *NOTE: The...

16" X 3.0" front or rear wheel assembly includes black hub, chrome rim and 40 zicad plated spokes.*NOTE: Zicad is a dull shade of zinc similar to cadmium. This wheel assembly also...

Description 19" big drum front wheel assembly includes polished drum with internals, drop center chrome rim and 40 stainless steel spokes. Assembly is laced and trued, ready for installation. ...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

16" x 3.00 rear wheel assembly with chrome hub and bearings installed, chrome rim, and chrome spokes.*NOTE: The valve stem hole is on the sprocket side. **NOTE: All spokes on wheel need to be...

Replacement tank mounts can be used on Fat Bob tanks and also on custom frames where the mounts do not exist. Fits:FL 1955-1984Additional Information UOM

200 XL rigid frame features a 40  rake with a 3" stretch in front legs to accept a 1-1/8" belt with 200 series tire.Frame has kickstand tab and battery box mount welded in place. Accepts a right side...

Rear frame swingarm features a chrome finish. Bearings and races are not included. Fits:FX 1970-1984Additional Information UOM1 - EA

V-Twin - 51-1955 - Replica inchHM inch Straight Leg Rigid FrameDescriptionReplica "HM" straight leg rigid frame is an authentic reproduction of the 1954-1957 straight leg frame with stock 30  neck...

Weld-on brake tab features a raw finish. Mounts stock or replica frames to the rear drum brake backing plate. Fits:FL 1958-1972Additional Information UOM

Footpeg support bar set is the splined type featuring a raw steel construction.Attaches to early Sportster frames to mount footpeg stanchions. One end is splined and the other fits over the frame...

Engine mount shim is used to raise motor for front or rear clearance, when necessary.Sold in a pack of 5. Fits:FL 1941-1999EL 1936-1952Additional Information

Engine bar features 1" tubing and a black finish.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very slow...

Raw steel weld-on hardtail features a raw steel finish.Replaces entire rear section of the frame, for the full rigid look. *NOTE: Must be installed by a certified welder. Fits:XL 1957-1978Additional...

Replica swingarm frame is our authentic reproduction of FLH style to accept a Panhead or Shovelhead engine, 4-speed transmission, seat post, and accepts a round or square swingarm. All components are...