1973

Chrome 8" Lower Y heat shield includes worm clamps. Fits:FL 1970-1984Additional Information OEM No.65565-70A U

Replica chrome header set.Set will accept heat shields. Order clamps and muffler separately. Fits:XLCH 1957-1978XL 1957-1978XLH 1957-1978Additional Information

Rear heat shield has worm clamps included. Shields have a cutout for crossover pipes. Fits:FL 1970-1984Additional Information OEM No.65563-70

Front heat shield is 26" long with worm clamps included. Fits:FL 1970-1984Additional Information OEM No.65561-70

Aluminum exhaust repair ports are to be welded on broken or damaged heads.Sold in a quantity of 2.

Rear heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65702-68B

Front heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65728-66

Chrome true dual exhaust system features independent exhaust pipes to fit 1970-1984 Shovelhead models with a fishtail kit.True dual exhaust system features completely separate exhaust pipes, heat...

True dual exhaust header set features pipes that function independently.True dual exhaust system features completely separate exhaust pipes. Front and rear pipes function independently. Pipe set...

Chrome 2 into 1 exhaust header kit is for 1970-1984 FLH models when the front pipe is inside front frame tubes. Heat shields are included. Pipe set is for kick and electric start.Baffles are not...

Chrome dual crossover system features intersection of left side crossover at rear pipe. Pipes have a 1-3/4" outer diameter. Pipes are for kick and electric start.Requires left and right support tubes...

Black 2:1 siamese hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames, and features a one piece design for Ironheads only.One piece header will...

Chrome 2:1 hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames. Features a one piece designOne piece header will require the installer to saw out...

Stock type 2 into 1 exhaust header kit is for FLH models when the front pipe is inside front frame tubes. Pipes are for kick and electric start models. Features a black finish.*NOTE: Must be painted...

Chrome stock type 2 into 1 exhaust header kit is for FLH models when the front pipe is inside front frame tubes. Pipe set is for kick and electric start.Kit does not fit with mid controls. *NOTE:...

Shovelhead front and rear upsweep header pipe set featrues a chrome finish and will accept straight fishtail extensions or mufflers.2 piece header set is for rigid frame installation with nose cone...

Chrome upsweep rear exhaust header for Shovelhead motors in a rigid frames.The channel mount is on the rear side of the header pipes, to attach to the frame with "T" bolts. For use with upsweep...

Replica Shovelhead chrome upsweep drag header set will accept straight fishtail extensions or mufflers. Includes a rear header pipe and a front header pipe.For use on Shovelhead nose cone motors in...

Starter solenoid black plunger boot. Fits:FLT 1979-1982XL 1967-1980FL 1965-1982FX 1971-1982Additional Information OEM No.31441

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

Foam pad only for rear fender bracket.Use with bracket to reduce vibration between the fender and the frame. Fits:XL 1954-1978XLCH 1954-1978Additional Information

Handlebar damper is nylon and provides stiffer dampening action and longer life. Fits: FXR 1982-1994 FXD 1991-2017 XL 1973-2003 FX 1973-1984 FLST 1986-2017 FXST 1984-2017 FL 1973-1984 Additional...

Brake/clutch pedal pad set is rectangular shaped, with rubber construction, slide into place. Original design from the 1940's. Fits:FL 1941-1984EL 1936-1952Additional Information

Stop tail lamp switch cap is made of rubber and protects the stop switch from moisture. Stock replacement type. Fits:XL 1972-1981FX 1972-1981Additional Information

V-Twin - 28-1997 - Black Solenoid Plunger Rubber BootDescriptionSolenoid plunger boot fits 1965-1988 solenoids. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

V-Twin - 28-1955 - Rear Master Cylinder Rubber BootDescriptionRear master cylinder boots are sold in an assortment of 5 early and 5 late type. Stock OE replacement. Fits:FL 1958-1978FX...

V-Twin - 28-1952 - Speedometer Isolation Mount KitDescriptionSpeedometer isolation mount kit includes two pins, clips, bushings, and molded outer ring which helps prevent damage to speedometer by...

Top bushing set Fits: FXD 1991-2005 FXR 1988-1994 XL 1954-1999 Additional Information UOM 1 - KIT

39mm rubber sleeve for 38mm flatslide carburetors. Fits:FX 1971-1984FL 1966-1984XL 1963-1984Additional Information UOM1 - EA

Black rubber fork boot 35mm is designed for a better fit and improved sealing and wiping action.Sold in a quanity of 2. Fits:FXE 1973-1977XL 1973-1974FX 1973-1977FXS 1973-1977Additional Information

Black rubber fork boot 41mm is designed for a better fit and improved sealing and wiping action.Sold in a quanity of 2. Fits:FL 1949-1976Additional Information

V-Twin - 28-0749 - Battery Tray ISO Stud SetDescriptionISO rubber mounting studs with male-male ends are 1/4"-20 coarse thread hex type.The rubber mount can be used for various applications on both...

White FLH brake pedal rubber kit includes the steel inner mount plate and stud.Kit includes back plate and stud for installation. *NOTE: Brake pedal must have a slot or hole for installation. ...

Solid handlebar mounts are chrome plated and replace the stock rubber bushings. You will get instant response from these as they provide a solid connection between the handlebars and fork assembly...

V-Twin - 28-0673 - Solid Mount Kit ChromeDescriptionChrome solid mount kit is to replace rubber bushings and cap washers.Order bolt set separately. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL...

Replica black tank filler rubber strip is just like the original and is used to fill in the space betweeen Fat Bob tanks when using a Seat T. Fits:FL 1941-1984UL 1939-1948EL 1939-1940Additional...

Small type gas tank mount horseshoe can be used on 1 piece FX or quick bob tanks. Stock OE replacement type.Rubber measures 2-7/8"W x 2-1/2"H. Fits:FX 1973-1984Additional Information <

Battery pad kit includes bottom and cover pads for use with electric start models. Use with H-12 battery. Fits:FL 1965-1984XLH 1967-1978Additional Information

Battery pad kit includes bottom and cover pads for use with electric start models. Use with 12N164B batteryKit is a four piece set. Fits:XL 1979-1996FXE 1973-1984Additional Information

Off white brake pedal rubber.*NOTE: Because of the different manufacturing processes, the rubber may discolor with age over time and some products may appear closer to off-white in color. As they are...