1973

Old-STF Cycle - Brass Rocker Box Split Oil Line Features: No hassle kit for Shovelheads 1966-84. Heavy 1/4" Brass oil lines are pre bent with all necessary fittings. These lines will eliminate the problem of the "starving front head" All compression...

Old-STF Cycle - Brass Rocker Box Oil Line fits Ironhead Sportster Features: Old-Stf Ironhead Sportster loop rocker box lines. 1/4" Brass oil lines pre- bent with all necessary fittings. Easy install, all lines and fittings are polished. Install loop...

V-Twin Replica XR 750 2 Gallon Gas Tank for Harley XL 1957-1978 Replica 2 gallon gas tank features the classic XR 750 design with steel construction. The petcock is on the left side. Accepts bung style vented gas cap and 1986-up vented type gas caps...

Paughco 1-3/4" Drag Pipes Fits Harley-Davidson 57-78, 80-85 XL Models Hanger bracket is required for installation, not included in package. Refer to part list below for additional accessories. Required parts and optional parts: 1861-1047 - Brake...

Paughco Muffler Support Bracket Fits Harley 58-84 FX, FL Models This muffler support bracket is a direct replacement for stock support bracket. Features: Heavy-duty, heli-arc constructed supports Chrome right side support is direct replacement for...

Paughco Hanger Bracket for Rear Pipe Hanger bracket used for various Paughco exhaust systems.

Drag Specialties Rear Wheel Sprockets Convert your rear drive belt to a 530 chain with the Rear Wheel Sprockets by Drag Specialties. Available in 46, 48 and 49-tooth. Features: Convert rear drive belt to 530 chain Steel with a gloss black...

Colony Primary Filler Cap fits '71-'76 XL This chrome filler cap is durable and looks nice. It includes a breather/baffle and comes with a rubber o-ring. Swap out the OEM cap on your motorcycle with the Colony primary filler cap knowing you're using a...

Drag Specialties - Chrome Outer Primary Cover - fits '70-'84 FL Drag Specialties outer primary kit is just what you need for your Harley Davidson if you're looking to switch it up a bit. Made from durable aluminum, this cover can withstand just about...

Drag Specialties - Predator Seat fits '54-'84 FX/FL/FLH &'80-'84 FXWG This low profile predator seat is a sleek looking seat and is molded with polyurethane foam promoting supreme comfort. Made with black vinyl and smooth stitching, this seat is...

All Balls Racing - Swing Arm Bearing Kit fits '58-'85 Harley Big Twin Models (Except Softail) Features Contains all of the bearings, shafts, seals, and bushings required to build a swing arm to factory specs Manufactured from 52100 bearing...

Colony - 8107-16 Cadmium Cylinder Base Nuts and Washers fits '29-'52 WL, '57-'85 XL, '32-'73 G Models Cadmium stock cylinder base set includes 8 nuts & washers. Fitment: WL 1929-1952 XL 1957-1985 G 1932-1973

Colony - 8170-10 7/16" x 3/4" x 1/8" Replica Steel Washer fits '71-'84 FX, '57-'85 XL, '48-'84 FL Models Rebuilding the heads on your Shovelhead? Use our cadmium headbolt washer kits from Colony Motorcycle Products. They measure 13/32 X 11/16 X 1/32...

Belt Drives Ltd. - Kevlar Clutch Kit fits:'68 - 'E84 Big Twins Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved...

Available for 12V applications in a black finish Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine If you have purchased a Cycle Electric generator since 1984 it may have the...

 Burly Brand - 14" Narrow Bottom Ape Hangers for 1" Handlebars The Narrow Bottom handlebars are Burly Brand's twist on the classic ape hanger. Pre-drilled and slotted making internal wiring a breeze, you can choose from black or chrome for a finish...

Biltwell - Tracker Mid Smooth Handlebars 1" Black Biltwell has done it again- these low profile Tracker Handlebars look great on just about any motorcycle! Choose from chrome or black. These are even lower than most stock bars, so you don't need to...

Biltwell - Tyson XL Pullback 14" Handlebars- Chrome/ Slotted These T-style handlebars are a clean look on FXR's, Dynas, Sportsters, and Choppers. Features Manufactured from 1" OD x .120" wall seamless 4130 chromoly tubing All bends are created with...

Biltwell - Tyson XL 14'' Handlebars - Black/ Slotted These T-style handlebars are a clean look on FXR's, Dynas, Sportsters, and Choppers. They are available in your choice of a chrome or black finish. Features Made from rugged seamless 4130 chromoly...

Uni Filter - Air Filter fits 'L73-'E75 Sportster 1000 (3” W), 'L75-'76 FX, FL & FLH Models (OEM #29086-73) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior...

Uni Filter - Air Filter fits '83-'85 Sportster 1000,  '66-'E73 Sportster 900, 1000, '67-'E75 FX, FL & FLH Models (OEM #29036-72) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

Drag Specialties - Paper Oil Filter fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #53839-59, 63840-53) Features: High-quality drop-in oil filter Fitment 1981-1982 Harley-Davidson Electra Glide Classic FLH - Notes: 1982Fits...

V-Twin - Battery Top Cover and Strap Kit fits '73-'84 FXE Electric Start Model Kit includes proper cover and hold down strap for electric start models. Fitment: FXE 1973-1984 Fits electric start

V-Twin - Tro-Cy Brass Petcock 3/8" NPT Solid machined natural brass, with 3/8" NPT thread and "full bore" 3/8" hose end. For all tanks with 3/8" NPT bungs. Note: 1970's original design by Ron Trock of Trock Cycles Fitment: XL 1955-1974

V-Twin - Chrome Handlebar Assembly fits '57-'73 XLCH Model XLCH handlebar assembly includes two piece chrome bars with internals and cables for both sides; spark advance, throttle dimmer, horn button grips, end plugs, riser and black handlebar clamp...

Motorshop - Alternator Rotor Puller Tool fits '91-'06 FXD, '84-'94 FXR, '86-'06 FLST Models Alternator rotor puller tool Fitment: FL 1971-1984 FLST 1986-2006 FXST 1984-2006 FX 1971-1984 FXD 1991-2006 FXR 1984-1994 FLT 1979-1996

V-Twin - Oil Tank Mount Bracket Set fits '65-'85 FX, '58-'64 FL Models Oil tank mount bracket set features a zinc plated finish. Set includes front mount and rear plate mount. Fitment: FX 1965-1985 FL 1958-1964

V-Twin - SMC Electric Start Oil Tank fits '58-'64 FL, '71-'85 FX Models Swingarm York oil tank features a chrome finish. Oil tank is for use on 4-speed models with a stock swingarm frame. tncludes screw in filler cap with dipstick. Tank is for use...

S&S Cycle - HI-4N Ignition Module Kit fits '70-'99 Big Twin Models Features: Updated version of the popular Crane HI-4 ignition More power than the stock ignition Single-fire and dual-fire function built into a single module All-metal housing...

S&S Cycle - Billet Oil Pump fits '70-'91 Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check...

S&S Cycle - Solid Lifter Conversion Kit fits '66-'84 Shovelhead Model Features: Converts stock hydraulic lifters to adjustable solids Kit includes four nonadjustable steel pushrods, four adjustable inserts and instructions Made in the U.S.A...

S&S Cycle - Valve Spring Kit fits '48-'84 Big Twin Models Features: To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure Must allow additional rocker clearance for 48-65 Panheads Made in...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Belt Drives Ltd. - 2" Open Belt Drive Kit fits '70-'78 Big Twin Models Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch for smooth, sure power transfer Kit includes motor plate, starter...

Belt Drives Ltd. - 2" Shorty Belt Drive fits '70-'78 Big Twin Models Features: Designed for electric start applications (use 90-06 style starter) Kit includes starter housing, BDL ball-bearing lockup clutch assembly with ring gear, starter gear...

Belt Drives Ltd. - 1-1/2" 4-Speed Belt Drive fits '70-'83 Big Twin w/ Rear Chain Drive Features: 1-1/2" and 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and...

Colony - 9653-4 3/8-16 x 3/8-24 Transmission Stud for '36-'83 4-Speed (STD.) (OEM #34724-36) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - 8752-19 Chrome Transmission Side Cover Cap fits '66-'85 Big Twin Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - 8400-8 Chrome Rocker Shaft End Cap fits '66-'84 Big Twin & '57-'70 Sportster Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...