Super Glide FX Kick Start

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length H

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal<

Jims - 96384-39 Shift Fork Gauge fits '39-'78 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A.

Colony - 8140-34 Chrome Stock Engine Case Bolt Kit fits '70-'78 FL, '71-'78 FX Models Engine case kit includes all the necessary hardware to bolt together engine cases. Fitment: FX 1971-1978 FL...

Colony - 9671-20 Parkerized Transmission Side Cover Kit fits '37-'48 UL, '71-'84 FX, '36-'40 EL Models Parkerized hex stock style kit includes nuts and washers for the transmission side cover and...

Colony - 3547-5 Sprocket Bolt Zinc Plated Washer Kit fits '82-'94 FXR, '91-'17 FXD, '79-Up Sportster Models Zinc plated spring steel washers used on 7/16" rear sprocket bolts Fitment: FXST...

Colony - 9715-8 Chrome Cylinder Base Lock Washer fits '71-'77 FX, '37-'48 UL, '30-'34 VL Models Chrome cylinder base lock washer Fitment:  FX 1971-1977 UL 1937-1948 VL 1930-1934 FL...

Colony - 9716-8 Parkerized Cylinder Base Lock Washer fits '71-'77 FX, '37-'48 UL, '30-'34 VL Models Cylinder base lock washer with a parkerized finish Fitment:  FX 1971-1977 UL 1937-1948 VL...

Colony - 9717-1 Parkerized Kick Starter Spring Stud fits '37-'48 UL, '71-'84 FX, '36-'40 EL Models (OEM #33090-36) Kick starter spring stud with a parkerized finish Fitment: UL 1937-1948 FX...

Colony - 3693-20 Rear Fender Rail Screw and Nut Kit fits '72-'86 FX Model Rear fender rail screw and nut kit includes 7680W acorn nuts, zinc plated bolts washers, spacers and nuts. Not for use on...

V-Twin - 35mm Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models Chrome lower fork stem cover can be installed without disassembling forks. Fork stem cover is for FXR...

V-Twin - Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models (OEM #45751-71A) Chrome lower fork stem cover is 1 piece and for FXR and FXD models. Fitment: FXR...

Colony - 9817-15 Electric Terminal Wiring Plate fits '71-'74 FX, '70-'74 Sportster Models (OEM #72303-70) Electric terminal wiring plate is preassembled and includes auxiliary junction for headlamp...

V-Twin - Black Battery Top Cover fits '71-'84 FX, '70-'78 XLCH Models (OEM #66369-70) Battery top cover features a black finish Fitment: FX 1971-1984 XLCH 1970-1978 Measurements: Length: 5-9/16"...

Colony - 9868-26 Inner Primary Mount Kit fits '70-'79 FL, '71-'79 FX Models Inner primary mount kit for FL and FX models Fitment: FL 1970-1979 FX 1971-1979

Colony - 9910-4 Fork Slider Drain Screws fits '82-'86 FXR, '73-'84 FX, '73-Up Sportster Model (OEM #45790-80) Fork slider drain screws are supplied with washers and are s old in pairs...

Colony - 9963-1 Chrome Triple Tree Stem Nut Washer fits '71-'84 FX, '79-'85 Sportster Models (OEM #45718-71) Chrome triple tree stem nut washer Fitment: FX 1971-1984 XL 1979-1985

V-Twin - 52" Inline Spring Fork Assembly fits Custom Application Unit features chrome springs, and rockers, front and rear leg in black. This 52" assembly is 20" over stock length. Includes inner and...

V-Twin - Zinc Passenger Footpeg Set fits '73-'84 FX Model Passenger footpeg set with a male yoke features a zinc finish. The length from the center of the clevis bolt to the end is 100mm. Sold asset...

V-Twin - AEE Hydraulic Brake Pedal Kit fits '41-'84 FL, '73-'84 FX Models AEE hydraulic brake pedal kit includes a bronze small grate style brake pedal pad, chrome master cylinder, stainless pedal...

V-Twin - AEE Foot Shifter Kit fits '41-'84 FL, '73-'84 FX Models AEE foot shifter kit for 4 and 5 speed applications. Includes rod for ratchet top fitment and rubber peg with clevis to change peg to...

V-Twin - 16" x 3.50" Rear or Front Spoke Wheel fits '73-'84 FL, '73-'83 FX Rear only Models Replica 16" X 3.50" wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.  Note:...

V-Twin - Top Frame Tube fits '71-'84 FX, '48-'84 FL Models Rigid Big Twin top frame tube to be welded on for restoration or repair. Fitment: FX 1971-1984 FL 1948-1984

V-Twin - Solo Seat Mount Kit fits '65-'84 FL, '72-'84 FX Models Solo seat mount kit includes black painted cross bracket, seat "T" and 3 chrome springs. Assembly bolt on, no welding necessary...

V-Twin - Tuck and Roll Frame Mount Solo Seat Set fits '71-'84 FX, '58-'84 FL Models Frame mount vinyl tuck and roll style solo seat set is black naugahyde on a steel base plate for direct frame...

Colony - Universal Line Fitting fits '52-'99 Big Twin & '57-'85 Sportster Models (OEM #63578-52) Features: OEM replacement restoration For use with 5/16" hose

Hard Drive - Shovelhead Exhaust Stud Conversion Kit fits '66-'84 Shovelhead Model Features This kit helps prevent thread stripping in the cylinder head by using permanently installed studs. Kit:...

Drag Specialties - High Performance Battery fits '70-'78 Sportster Models (Repl. OEM#66006-70) Replaces OEM#66006-70. Acid Not Included. Features Specifically designed for high-performance...

VT No: 35-0757 Brass hex petcock has 90° right hand spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot. On/Off handle is chrome. For early...

The Colony Rocker Shaft End Plug and Cap Kit: Meets or exceeds OEM specifications Made in the USA Chrome plated allen style Fitment: '71-Up Shovelhead and '71-'85 XL Models

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '70-'98 Big Twin Models

The HardDrive Shovel Rocker Arms: Fits '66-'84 Big Twin Models Rocker arms include bushings

The HardDrive Shovel Rocker Arms: Fits '66-'84 Big Twin Models Rocker arms include bushings

Colony - 8141-34 Cadmium Stock Engine Case Bolt Kit fits '70-'78 FL, '71-'78 FX Models Engine case kit includes all the necessary hardware to bolt together engine cases. Fitment: FX 1971-1978

Cylinder head engine brace mount. Fits: FL 1966-1984 FX 1971-1984

Upper and lower allen motor mount kit Fits: FL 1970-1984 FX 1971-1984