1974

Drag Specialties - 40 Spoke Black Laced Wheel 16” x 3” fits Front Wheel '73-'84 FL, Rear Wheel '73-'84 FL, '73-'81 FX Models (OEM #40908-81) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

V-Twin - Frame Mount Solo Seat fits '70-'84 FX, '65-'84 FL Models - Black Vinyl Frame mount vinyl solo seat is equipped with molded high density foam padding and a plastic seat pan. This solo seat mounts directly to the frame without springs. The...

V-Twin - AEE Shock Set with Covered Springs fits '73-'84 FX '73-'84 FL Models (OEM #54500-73A) AEE chrome 12" shock set comes with full covered springs. The inner diameter of the top eyelet is .512". The inner diameter of the bottom eyelet are...

V-Twin - MCM FXE Goose Drag Pipe Set fits '70-'84 FXE Model - Chrome Chrome goose style drag pipes feature retro chopper styling in 1-3/4" diameter, with channel mounts and is 35" long with slash cut ends. *NOTE: Does not have baffles or drilled...

V-Twin - Chrome 2 into 1 Exhaust Header Set fits '70-'84 FL, '71-'84 FX Models Chrome 2 into 1 exhaust header pipe set is for use with forward controls only. Set includes 12mm oxygen sensor bung. The turn out end is 3" in diameter. For use with...

Colony - 8769-3 Front Axle Nut/Washer Kit fits '99-'07 FXDWG, '00-'06 FXST/​FLST, '99-'07 FLHT/​FLHR/​FLTR; 1/2”-20 Thread (OEM #6590HW, 7068, 7845) Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4"...

Colony - Throttle Roller/Pin Kit fits '54-'65 Big Twin Models (OEM #56276-31, 56278-10) Features: Kit includes hardened and grounded rollers, pins, coil plug set screws and control wire ends Designed specifically for Harley-Davidson­® Made...

Colony - Pushrod Kit fits '57-'85 Sportster w/ Solid Lifters (OEM #17904-57) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster...

Colony - Hydraulic Pushrods fits '66-'84 Shovelhead w/ Hydraulic Lifters (OEM #17904-66) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A...

Drag Specialties - Chrome Master Cylinder Cover fits '72-'81 Big Twin, '73-'81 Sportster Models (OEM #45012-72, 45057-72) Features: Chrome finish Include gasket Fitment 1981 Harley-Davidson Electra Glide Heritage...

Drag Specialties - Rear Master Cylinder fits '73-'E79 FX/FL, 3/4” bore (OEM #41761-78) Features: Complete rear master cylinder assembly Polished and chrome-plated Fully assembled for easy...

Drag Specialties - Front Master Cylinder Repair Kit fits '73-'81 Big Twin & Sportster 3/ 4” bore (OEM #45063-72) Features: Meet or exceed OEM specifications Fitment 1981 Harley-Davidson Electra Glide Heritage...

Custom Dynamics - 5.75" Pro Beam LED Headlamp (OEM #677002-48, 67757-92) Features: Low beam consists of three high-power advanced optical D lenses and a DRL High Beam keeps low beam illuminated and adds two additional advanced optical D lenses with...

Drag Specialties - Oil Plug Temperature Gauge fits '66-'84 FX/FL/FXWG Models Features: Sensitive to oil temperatures up to 350°F Chrome gauge bezel For 66-84 FX, FL, FXWG (3 7/8” L) Fitment 1984 Harley-Davidson Electra Glide...

Drag Specialties - Replacement Oil Tank fits '65-'E82 FX/FL Model (OEM #62483-81) Features: Includes drain/fill plugs, cap assembly and gasket Approximately 3-quart capacity Fitment 1981-1982 Harley-Davidson Electra Glide Classic...

V-Twin - 24 Tooth Compensator Sprocket Kit fits '70-'84 FL, '71-'84 FX Model Kit Includes: 24 tooth sprocket, retainer and cover assembly, a raw compensator sprocket cup, motor sprocket nut , a forged motor sprocket cam, and a sprocket shaft...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers, premium bronze bushing and factory pre-lubing...

V-Twin - 23-1/2" Hard Chrome 35mm Fork Tube Set fits '73-'74 Sportster & FX Model Features: This fork tube set is stock 35mm diameter X 23-1/2" long Before installing, compare new and old tubes Be sure the stock top plugs fit into the new fork...

V-Twin - Chrome 35mm Fork Tube w/ 23-1/2" Length fits '73-'77 FX, '73-'74 Sportster Models (OEM #45977-73) Fork tube set is 23-1/2" stock length, Before installing, compare new and old tubes. Be sure the stock top plug threads into the new fork...

V-Twin - Replica XL 2 Gallon Steel Gas Tank Raw fits '57-'78 Sportster Model Features the classic XR 750 style with raw steel construction. Specifications: Petcock located on the right side. Accepts bung-style vented gas cap (must be ordered...

Original Garage - 41mm Speed Fork Brace fits '13-Down Touring Model Introducing our Fork braces for H-Ds 13-down Touring models with stock 41mm front end. Carefully designed to improve your ride stability, riding precision and greatly reduce front end...

Colony - Cylinder Base Stud Set fits '30-'77 Big Twin Models (OEM #16831-30) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - Disc Brake Rotor Bolt and Nut Kit fits '73-'80 FL Rear, '73-'74 FL Front, '73 FX/XL Front Features: Zinc plated thin hex bolts and...

Colony - Inner Primary Mount Kit fits '70-'79 Big Twin 4-Speed Models (OEM #16830-54, 4017, 4021) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Allen Oil Pump Plug Kit fits Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - Seat Post Rod Assembly fits '48-'80 Big Twin Models (OEM #51634-36, 51661-36) Features: Made in the U.S.A. Replacement Part for OEM: 5163436 5166136 5167225 5167425 5179131 Fitment 1984 Harley-Davidson Electra Glide...

Colony - 9400-1 Chrome Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...

Colony - 8768-3 Axle Nut/Washer Kit fits '86-'91 Sportster; 5/8”-18 Thread (OEM #6653, 7038, 7813) - Chrome Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of original...

Colony - Zinc Speedometer Cable Clamp fits '61-'80 Big Twin, '61-'80 Sportster Models (OEM #67074-57A) Features: Complete reproduction of original H-D clamps Made in the U.S.A. Fitment 1980 Harley-Davidson Electra Glide Sport...

Colony - Jiffy Stand Pin and Screw Kit fits '57-'84 Sportster Model (OEM #1760B, 50090-53) Features: Replaces Jiffy stand pin and screw Made in the U.S.A. Fitment 1983-1984 Harley-Davidson Sportster 1000...

Colony - Seat Post Nut Kit fits '36-'80 Big Twin Models (OEM #51674-25) Features: Seat post rod locknut and lockwasher Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Colony - Seat Tee Mount Kit for '48-'80 FL/​FLH (OEM #52092-34, 52096-34) Features: Reproduction of studs, nuts, seat height adjustment spacers, round head bolt and tapered washers to mount the seat to the tee Made in the U.S.A...

Colony - Foot Lever Bracket Bushings fits '36-'78 Big Twin Models (OEM #36857-36) Features: Reproduction of original bronze bushings Made in the U.S.A. Fitment 1978 Harley-Davidson Electra Glide...

Colony - Generator Post Screw Kit fits '58-'69 Big Twin & '58-'78 Sportster Models (OEM #2690W, 31098-58) Features: Kit includes two screws, two insulating bushings, two fiber washers, two lock washers, and two nuts Made in the U.S.A...

Colony - Coil Mounting Stud Kit fits '56-'82 Big Twin Models (OEM #72341-56A) Features: Kit features two studs, two nuts, four internal star lock washers, and two flat washers Made in the U.S.A...

Colony - 8112-20 Chrome Transmission Kicker Cover Nut Kit fits '36-'84 Big Twin Models (OEM #7055, 7752, 7835) Features: Kits include (9) nuts, (9) flat washers, (1) nut and (1) washer Made in the U.S.A...

Colony - Transmission Top Cover Screw Kit fits '65-'E79 Big Twin Models (OEM #1765W, 2333) Features: OEM duplicate used to mount the transmission top cover Made in the U.S.A. Fitment 1979 Harley-Davidson Fat Bob...

Colony - 8773-12 Cadmium Footboard Hinge Bolt Kit fits '49-'81 FL/​FLH Model (OEM #50635-14) Features: Kits include four shoulder bolts, with nuts, and lock washers Made in the U.S.A. Fitment 1981 Harley-Davidson Electra Glide Heritage...

Colony - Transmission Mounting Hardware Kit fits '65-'E77 Big Twin Models (OEM #34747-65) Features: Includes one lock strap, five washers, five lock washers, two bolts, two bolts, four bolts; and one bolt Made in the U.S.A...

Colony - Upper and Lower Motor Mount Hardware fits '70-'84 Shovelhead Model (OEM #4401W, 4435W) Features: Includes one 7/16" - 20 x 1-1/2" bolt, one 7/16" - 20 nylock nut, three 5/16" OD x 7/16" ID x 1/8" thick flat washers, two 3/8" - 24 x 3-1/2"...