Super Glide FXE Electric Start

Complete chain tensioner kit for 1965-1984 models. Kit includes chain tensioner hardware, nylon pad, primary chain adjuster, nut and anchor plate.*NOTE: This is the original style kit with the...

Clutch cable bracket features a zinc finish. Fits:FX 1971-1978FL 1965-1978Additional Information UOM1 - EA

Clutch release arm with a zinc finish. Fits:FX 1971-1978FL 1968-1978Additional Information UOM1 - EA

Chain tensioner plate Fits:FXD 1991-2000FXST 1984-2000FL 1965-1984FX 1971-1984FLST 1986-2000FXR 1984-1994FLT 1984-2000Additional Information

Ball end pushrod adjusting screw. Fits:FX 1971-1984FL 1941-1984Additional Information OEM No.37357-41

4-speed clutch release arm features a zinc plated finish. Fits:FX 1973-1978FL 1968-1978Additional Information UOM1 - EA

10-Hole outer clutch pressure plate with a black finish. Fits:FX 1971-1984UL 1941-1948FL 1941-1984Additional Information OEM No.38010-4

3-Hole outer clutch pressure plate with a black finish. Fits:FX 1971-1984FL 1941-1984Additional Information OEM No.38010-41

Kit is for 4-speed models and includes clutch drum, 3 stud clutch hub, 4 steel and 5 fiber plates, springs, outer clutch, releasing disc, and clutch hub nut with lock tab, key, and seal.Clutch drum...

FX shifter gear. Fits:FX 1975-1979Additional Information OEM No.33960-74 UOM1 - EA

Shifter pivot end measures 5/16" x 24. Fits:XL 1975-1976FX 1974-1985Additional Information OEM No.42585-75

2020 New Production transmission shifter shaft assembly kit includes a shaft finger, lock screw, rollers, seal, bushing, nuts, locks, shims and a spacer.*NOTE: Must order fork separately. Fits:UL...

Transmission hardware and rebuild kit includes locks, bushings, keys, gasket set, mainshaft race and snap rings for completing a 4-speed transmission rebuild. Fits:UL 1937-1948FL 1941-1964FX...

York shifter fork set for 1941-1985 Big Twin 4-speed models.Sold as a pair. Fits:FLH 1941-1985FXE 1971-1985Additional Information UOM1 - S

Bare ratchet top casting features mount for 1.4kw starter. Reainforced at outer mount flange and starter flange. Fits:FL 1952-1978FX 1973-1978Additional Information

Transmission countershaft retainer washer is for low or 2nd gear. Washer measures 1.14mm and .045" thick. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Transmission countershaft retainer washer is for low or 2nd gear. Washer measures 1.21mm and .048" thick. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Transmission countershaft retainer washer is for low or 2nd gear. Washer measures 1.27mm and .050" thick. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Electric starter thrust washer. Fits:FXR 1982-1988FXST 1984-1985FL 1965-1984FX 1971-1984XLH 1967-1980FLT 1979-1988FLST 1986-1988Additional Information

Cam thrust washer .040 thick.Sold as a pack of 5. Fits:FL 1957-1984FX 1971-1984Additional Information UOM5 - PK

Kick starter pedal assembly for FLH models. Fits:UL 1937-1948K 1952-1956XL 1957-1979EL 1936-1940FL 1941-1984WL 1929-1952FX 1941-1984Additional Information

Chrome kick starter pedal outer cover. Fits:UL 1937-1948K 1952-1956XL 1957-1979FX 1971-1984EL 1936-1940FL 1941-1984WL 1929-1952Additional Information

Kick starter arm kit features a naturl finish with forged stainless steel offset arm. Kit includes alloy Knucklehead kick starter pedal. Fits:XL 1971-1976FL 1954-1985FX 1971-1985Additional...

Transmission bolt lock tab will lock the front 2 bolts, securing the transmission plate to frameSold as a pack of 5. Fits:FL 1965-1984FX 1971-1984Additional Information

Chrome finish ratchet top transmission is fully assembled with all internal components. Top will allow forward push to shift up for 4-speed transmissions. Slap stick is chrome with black ball...

Kick starter pedal assembly for FLH models features a white finish.Includes rubber, pedal, bolt and bushing. Fits:FX 1970-1976FL 1948-1984Additional Information

Thrust washer is sold in a pack of 4: two of .065 and two of .070 compared to the stock thickness of .060 for, V-Twin #17-0161 4-Speed Main Shaft Thrust Washer.For the right side of mainshaft...

1952-1978 shifter pawl carrier kit for ratchet top 4 speed transmissions. Fits:FL 1952-1978FX 1973-1978Additional Information UOM1 - KIT

1952-1975 shifter pawl carrier kit for ratchet top 4 speed transmissions.Pawls are pre-fit to carrier bore. Kit can be used on ratchet top shifter assembly, available separately. Fits:FL 1952-1978FX...

Larger billet knuckle style kick starter pedal has a natural alloy finish. The center axle is made of heat treated steel. Fits:UL 1937-1948K 1952-1956XL 1957-1979FX 1971-1984EL 1936-1940FL...

Machined from a one piece forging, this replica large kick starter gear comed with a square stud as one piece with the gear. Fits:FX 1971-1984FL 1941-1984Additional Information

Kick starter mainshaft gear is 16 tooth and fits 74" and 80" models with 3 and 4-speed transmissions. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Kick starter bumper plate features a short tank on the stopper plate distance, from case to ear. Include bumper plate screws. Fits:FX 1971-1977UL 1937-1948EL 1936-1940FL 1941-1977Additional...

Oil deflector mainshaft starter gear Fits:FX 1971-1979UL 1939-1948EL 1939-1940FL 1941-1979Additional Information OEM No.33429-

Kick starter bumper plate features a short tank on the stopper plate distance, from case to ear. Fits:FX 1971-1977UL 1937-1948EL 1936-1940FL 1941-1977Additional Information

Billet knuckle style kick starter pedal has a natural alloy finish. The center axle is made of heat treated steel. Fits:UL 1937-1948K 1952-1956XL 1957-1979FX 1971-1984EL 1936-1940FL 1941-1984WL...

Hydraulic kick starter cover for 4-speed models features a polished finish.*NOTE: Requires to use with 11/16" master cylinder, banjo fitting 10mm, 3/8" AN#3 and one 3/8-24" bolt. Cover accepts kick...

Hydraulic kick starter cover for 4-speed models features a black finish.*NOTE: Requires to use with 11/16" master cylinder, banjo fitting 10mm, 3/8" AN#3 and one 3/8-24" bolt. Cover accepts kick...

Hydraulic kick starter cover for 4-speed models features a chrome finish.*NOTE: Requires to use with 11/16" mater cylinder, banjo fitting 10mm, 3/8" AN#3 and one 3/8-24" bolt. May require a extended...

New Old Stock" Eagle Iron Kick starter pedal rubber with logo includes bushing and washer.. Fits:UL 1937-1948K 1952-1956XL 1957-1979EL 1936-1940FL 1941-1984WL 1929-1952FX 1941-1984Additional...