1975

Colony - 8879-30 Chrome Rear Fender Mount Kit fits '58-'80 FL/​FLH Models (OEM #2272, 4018W, 4043W) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock...

Colony - 8881-18 Chrome Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #2272, 4362) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock...

Colony - Headlamp/Cowl Screws Set fits '60-'84 FL Model, '60-'73 Servi-Car Features: Duplicate of screws 2661W and 2662W Fitment: 1960-1979, 1981 Harley-Davidson FL - -

Colony - Stem Nut and Lock Washer Kit fits '99-'13 Touring, '00-'10 Softail & '06-'17 Dyna Models (OEM #45717-63, 45718-60) Features: Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the...

Colony - Tappet Oil Screen Plug Kit fits '70-'80 Big Twin Models (OEM #657) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - Transmission Kicker Cover Stud Kit fits '36-'84 Big Twin Models (OEM #24818-52, 33298-36) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - Cam Cover Acorn Hardware Kit fits '70-'99 Big Twin Models (Except Twin Cam) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - 8224-8 Rocker Shaft End Plug fits '71-'84 Shovelhead & '71-'85 Sportster Models (OEM #17448-71A, 7875) Features: Complete sets stock-style replacement rocker shaft end plugs, nuts, and washers Made in the U.S.A...

Colony - Tachometer Drive Block-Off Plug fits '57-'80 Sportster Models Features: Chrome-plated block-off plug for use when the stock mechanical tachometer is discarded Includes a nylon washer Made in the U.S.A. Fitment 1979-1980 Harley-Davidson...

Drag Specialties - Fat Bob-Style 3½-Gallon Gas Tank fits '48-'84 FX/ FL & Custom Frames to '84 Models Features Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks Gas caps sold...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '74-'80 Big Twin, '74-'80 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 54" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 10" Front Center Hub Mount Brake Rotor Shovelhead - Stainless Steel (Repl. OEM #41806-72B/ 41813-79) Features: Ground finish Drilled for better heat dissipation and improved brake performance in wet weather Designed for use with...

Drag Specialties - 10" Rear Vintage Drilled Brake Rotor Shovelhead - Polished Stainless Steel (Repl. OEM #41806-72B/ 41813-79) Features: Drilled for better heat dissipation and faster braking in wet...

Drag Specialties - Front Brake Caliper fits '72-'84 Touring Models (OEM #4400880) Features: OEM-style calipers in chrome finish Complete with all necessary mounting hardware and brake pads Check caliper-to-wheel clearance on custom wheels...

Drag Specialties - Chrome Rear Brake Caliper fits '73-'80FL/FX Models (OEM #4400078B) Features: Mounts directly to the OEM mounting bracket Accepts OEM bolts, shims, bushing and retainer (not included) Brake pads and bleeder screw...

DP - Heavy-Duty Clutch Kit fits '71-E'84 Sportster Models This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to store and transport parts, tools or...

Drag Specialties - Oil Pump Assembly fits '73-'91 Big Twin Models This is a high-quality replacement cast aluminum pump body with steel gears and a shaft. Features Raw cast aluminum finish Gaskets and seals included; mounting hardware sold...

S&S Cycle - 3.625" Bore Shovelhead Cylinder Kit fits '66-'84 Shovelhead Engines This Bore Shovelhead Cylinder Kit comes complete with front and rear cylinders, base nuts, headbolts, base gaskets and head gaskets. NOTE: 3.625" bore cylinders require...

Old-STF Cycle - Stainless/Black Rocker Box Split Oil Line fits '66-'84 Shovelhead The Old-STF Cycle Stainless/Black Rocker Box Split Oil Line is a high-quality kit that is designed to fit Shovelhead motorcycles from 1966 to 1984. This kit features...

Prism Supply Co. - Natural Stainless Steel Footpeg Support Bar Set fits Shovelhead/ Evo Motors w/ Cone Open Primary This Footpeg Support Bar Set is designed for frames featuring an installed "cone" type motor. It accepts female chopper footpegs that fit...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

V-Twin Roadster 3.5gal Gas Tank for Harley XL 1952-1978 Replaces Harley-Davidson part number 61006-57. Description: Replica gas tank has a right side petcock location, and fuel capacity of 3.5 gallons. Check the tank for flaws and fit before...

Drag Specialties - Buckhorn 1" Handlebars - Notched for TBW Drag Specialties 1" Buckhorn style handlebars for Harley model and custom applications. These bars are notched for Throttle By Wire (TBW) applications. Features: Available in a Chrome,...

James Gasket - Main Drive Gear Seal fits '37-'79 Big Twin 4-Speed Models (OEM #35230-39) Features: Top quality main drive gear shaft seals Fitment 1979 Harley-Davidson Fat Bob FXEF - Notes: 1979Fits Early 1979...

James Gasket - Oil Pump Shaft Seal fits '68-'99 Big Twin Models (5-Pack) (OEM #26227-58) Features: Replacement Outer Oil Pump O-Ring Fitment 1999 Harley-Davidson Softail Night Train FXSTB - - 1998 Harley-Davidson Road King...

James Gasket - Shifter Shaft Seal fits '57-'85 Sportster Models (5-Pack) (OEM #34035-52) Features: Replacement Shifter Shaft Seals Fitment 1983-1985 Harley-Davidson Sportster 1000 XLX - - 1983-1984 Harley-Davidson Sportster...

James Gasket - Mainshaft Double Lip Seal fits '67-'70 Sportster Models (5-Pack) (OEM #37741-67, 37741-67A) Features: Top quality main drive gear shaft seals Fitment 1981 Harley-Davidson Electra Glide Classic...

James Gasket - Primary Cover Gasket fits '67-'76 Sportster Models (OEM #34955-67, 34955-67A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Cover Gasket fits '67-'76 Sportster Models (5-Pack) (OEM #34955-67, 34955-67A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models (Gaskets, Seals and O-Rings) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the USA Note: Seals not...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Intake/Carburetor Gasket Kit fits '66-'84 Shovelhead, '79-'85 Sportster Models w/ Bendix/Keihin/​Tillotson (Butterfly Style) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Complete Motor Gasket Kit fits '70-'84 Shovelhead Models 4-Speed (Fire-Ring™ Head Gaskets (OEM #17029-70A)) Features: Top-quality gaskets, oil seals, and o-rings necessary to rebuild an XL engine Made in the U.S.A...

James Gasket - Primary Gasket Kit fits '84-'86 Touring & '84-'88 Softail Models w/ Silicone Bead Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

Jims - 1747 Lockdown Axle Kit fits '86-'04 Sportster Models Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm,...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...

Jims - 1168 Primary Cover Inspection Plug Tool fits '57-'90 Sportster Models Features: Use this tool to remove and install primary inspection plug Made in the USA