1975

Drag Specialties Predator Seat fits '54-'84 FX,FL,FLH and '80-'84 FXWG This low profile predator seat is a sleek looking seat and is molded with polyurethane foam promoting supreme comfort. Made with black vinyl and smooth stitching, this seat is just...

Drag Specialties Rear Wheel Sprockets Convert your rear drive belt to a 530 chain with the Rear Wheel Sprockets by Drag Specialties. Available in 46, 48 and 49-tooth. Features: Convert rear drive belt to 530 chain Steel with a gloss black...

Joker Machine - Points Cover fits '70-'99 Big Twin (Exc. Twin Cam Models) & '04-'22 Sportster Models (Exc. '21-'22 Sportster S/RH 1250S Models) - Chrome This point cover comes in a chrome-plated finish and is available in your choice of a finned or...

Old-STF Cycle - Brass Rocker Box Oil Line fits Ironhead Sportster Features: Old-Stf Ironhead Sportster loop rocker box lines. 1/4" Brass oil lines pre- bent with all necessary fittings. Easy install, all lines and fittings are polished. Install loop...

Old-STF Cycle - Brass Rocker Box Split Oil Line Features: No hassle kit for Shovelheads 1966-84. Heavy 1/4" Brass oil lines are pre bent with all necessary fittings. These lines will eliminate the problem of the "starving front head" All compression...

Paughco 1-3/4" Drag Pipes Fits Harley-Davidson 57-78, 80-85 XL Models Hanger bracket is required for installation, not included in package. Refer to part list below for additional accessories. Required parts and optional parts: 1861-1047 - Brake...

Paughco Hanger Bracket for Rear Pipe Hanger bracket used for various Paughco exhaust systems.

S&S Cycle - Stock Bore Cylinder and Stroker Piston Kit fits '66-'84 Shovelhead Engines This cylinder and piston kit can be used to create 84", 86" or 88" stroker engines, or to replace the cylinders and piston in an engine that already has an...

V-Twin - Tourist Trophy Gas Tank Set with Brackets fits '36-'52 EL, '41-'84 FL, '70-'84 FX Models Tourist Trophy gas tank set with brackets is 2.8 gallons without the dash cutout featuring a raw metal finish constructed of steel. For use with bayonet...

V-Twin Replica XR 750 2 Gallon Gas Tank for Harley XL 1957-1978 Replica 2 gallon gas tank features the classic XR 750 design with steel construction. The petcock is on the left side. Accepts bung style vented gas cap and 1986-up vented type gas caps...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Paughco - 1-3/4" Muffler Pipes W/ Tapered End - Fits Harley 70-84 FL Models w/ Electric Start These muffler pipes by Paughco measure 38" in length, 1-3/4" in diameter. The pipes are available with a tapered end. Heat shields are available...

Belt Drives LTD. Kevlar Clutch Kit fits '68-E'64 Big Twin Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved. Different...

Biltwell Moto Smooth 1"  Handlebars These bars are almost identical to the height of most stock handlebars, but just slightly wider. They have a tracker style and look great on Hinckley Triumph Bonnevilles and Scramblers, Harley 48, Hugger,...

Colony - 1" Brake Rotor Mounting Hardware Kit with Nuts fits '73-'80 FL, '73 FX & XL Models (OEM #41198-73) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt drives Complete with...

Colony - 1"-24 Thread  Acorn Stem Nut Hardware Kit fits '00-'13 Touring, '00-'13 Softail, '99-'17 Dyna Models (OEM #45718-60) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A...

Colony - 1-1/4" Sprocket/Belt Pulley Mounting Hardware Kit with Nuts fits '73-'92 FL, FX & XL Models (OEM #41197-73) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt...

Colony - 11/16"-16 Acorn/Oversized Timing Plug Crankcase/Oil Tank with Special Tap fits '86-'95 Sportster Models Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 11/16"-16 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-38) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug holes Fitment 2000 Harley-Davidson FXR...

Colony - 12-Point Head Bolt Sets fits '57-'85 Sportster Models (OEM #4709) Features: Individual chrome bolt and nut sets for specific applications Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000...

Colony - 12-Point Lift Block Screws fits Big Twin Models (OEM #3750, 3770) Features: Made in the USA Sold in sets of 8 Fitment 1974-1976 Harley-Davidson 1200 Super Glide FXE - Notes: 1976Fits Early 1976...

Colony - 4-Speed Kicker Spring Stud fits '36-'86 Big Twin Models (OEM #33152-59) Features: Chrome-plated reproduction of original kicker spring stud Round, smooth head Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide...

Colony - 41mm Fork Slider Bottom Cap Studs with Nut fits '66-'77 Shovelhead, '49-'65 Shovelhead Models (OEM #45840-48) Features: Package of two Made in the U.S.A. Fitment 1965-1977 Harley-Davidson Electra Glide...

Colony - 5/8" Brake Rotor  Socket-Head/Countersunk Mounting Hardware Kit with Nuts fits '74-'77 FX & XL Models (OEM #41191-73) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt...

Colony - 5/8"-18 Hex Crankcase Timing Plug (OEM #704, 720) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug holes Fitment 1983-1985 Harley-Davidson Sportster 1000...

Colony - 5/8"-18 Timing Plug Crankcase/Oil Tank fits '86-'95 Sportster Model Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug holes Fitment 2000 Harley-Davidson FXR...

Colony - 7/16"-14 x 1-1/2" Sprocket Pulley Mounting Hardware Kit with Washers fits '73-'98 FL, FX & XL Models (OEM #3769) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt...

Colony - 8112-20 Chrome Transmission Kicker Cover Nut Kit fits '36-'84 Big Twin Models (OEM #7055, 7752, 7835) Features: Kits include (9) nuts, (9) flat washers, (1) nut and (1) washer Made in the U.S.A...

Colony - 8768-3 Axle Nut/Washer Kit fits '86-'91 Sportster; 5/8”-18 Thread (OEM #6653, 7038, 7813) - Chrome Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of original...

Colony - 8769-3 Nut/Washer Kit fits '99-'07 FXDWG, '00-'06 FXST/​FLST, '99-'07 FLHT/​FLHR/​FLTR; 1/2”-20 Thread (OEM #6590HW, 7068, 7845) Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality...

Colony - 8876-5 Seat Bar Bushing Set fits '54-'80 Big Twin, '65-'80 Sportster Models (OEM #51925-65) Features: Precision-machined, heat treated and ground bushings Includes all mounting hardware Made in the U.S.A...

Colony - 8936-3 Rear Brake Pivot Bolt Washer Spacer Kit fits '73-'78 Sportster Models - Chrome Rear brake pivot washer and spacer kit includes spacer, washer and bolt in chrome. Fitment: XL 1973-1978

Colony - 8937-3 Rear Brake Pivot Bolt Washer Spacer Kit fits '73-'78 Sportster Models (OEM #41730-73) - Cadmium Rear brake pivot bolt, washer and spacer kit includes spacer, washer and bolt in cadmium.   Fitment: XL 1973-1978 

Colony - 9020-2 Rear Chain Adjuster fits '57-'78 Sportster, '52-'56 K Models - Cadmium Rear chain adjuster with a cadmium finish is 7/16" thick per side. Fitment: XL 1957-1978 K 1952-1956 Measurements: Length: 3.284"

Colony - 9106-8 Rear Brake Caliper Anchor Arm Bolt Kit fits '73-'80 FL, '73-'80 FX Models Rear brake caliper anchor arm bolt kit has a chrome finish. Fitment: FL 1973-1980 FX 1973-1980

Colony - 9107-8 Rear Brake Caliper Anchor Arm Bolt Kit fits '73-'80 FL/FX Models Rear brake caliper anchor arm bolt kit has a cadmium finish. Fitment: FL 1973-1980 FX 1973-1980

Colony - 9200-33 Windshield Mounting Screw Set  fits '49-'UP FL/FX Models - Chrome Chrome phillips windshield mounting screw set, acorn style Fitment: FL 1949-UP FX 1949-UP  

Colony - 9201-33 Windshield Mounting Screw Set fits '49-'UP FL/FX Models - Cadmium Cadmium windshield mounting screw set, phillips and acorn style Fitment: FL 1949-UP FX 1949-UP