Electra Glide FLH

Heavy cast steel construction top motor mount is unbreakable featuring a chrome finish.Thread hole is 5/16" x 18 to mount coil or other accessories, and the distance measures 2" center to center. ...

Heavy cast steel construction top motor mount is unbreakable featuring a zinc plated finish.Thread hole is 5/16" x 18 to mount coil or other accessories, and the distance measures 2" center to center...

2023 New Prodcution coil mount bracket kit features a black finish. Kit includes bracket, reinforcement plate, bolt set and coil mount hardware.Order mount stud set seperately. Fits:FX 1971-1984FL...

Front oil tank mount features a black finish.Mount allows the oil tank to fit close to the top frame rails. Fits:FL 1965-1984FX 1971-1984Additional Information

Solo seat mount kit for swingarm frame Big Twins.*NOTE: Must order seat separately. Fits:FL 1958-1984Additional Information UOM1 - KIT <

Left side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA

Right side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA

Solo seat front mount features a black finish.Requires 4 rivets for installation. Fits:FL 1941-1985Additional Information OEM No.32090-25

Black oil tank mount base plate to attached wrap around tank to frame post.Rear mount installation for swingarm frame oil tank mount bracket. For use with electric start kit and 4 speed models. ...

Solo seat mount kit includes the nose bracket, springs, rear brackets and hardware. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - K

Top starter mount brace for york electric starter kit and features a parkerized finish. Kit includes seat spring cross suport, seat bracket mount and long rear seat mount tab. For 4 speed models.For...

Starter motor support bracket for York electric starter kits to mount the 12 volt starter. Manufactured of cast iron and features a zinc plated finish. For 4 speed models.Bolts to the rear of the...

Front oil tank mount bracket. Fits:FL 1965-1985Additional Information UOM1 - EA ManufacturerV-Twin

FL type horn bracket features a zinc finish.*NOTE: Mounts FLH Delco horn under front headlamp cowl assembly, bracket bolts to top tree. Fits:FL 1965-1984Additional Information

Mini solo seat shock kit includes 4" shocks and two 1" clamps and springs.For use on frames with a 1" cross member on the rear part of the frame. Shock has an alloy body and adjuster ring with a...

Mini solo seat shock kit includes two 4" shocks, springs and frame clamps for 1" bars.For use on frames with a 1" cross member on the rear part of the frame. Shock has an alloy body and adjuster ring...

V-Twin - 31-1473 - License Plate Relocation Bracket BlackDescriptionBlack license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...

V-Twin - 31-1472 - License Plate Relocation Bracket ChromeDescriptionChrome license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...

Zinc plated front seat mount plate for solo seat mounting. Accepts seat nose bracket hinge assembly. Mounts with 5/16" bolts. Fits:FL 1965-1984FX 1973-1984Additional Information

Carburetor support bracket features a zinc plated finish.For Bendix an Keihin butterfly carburetors only, not for CV type. Fits:FL 1972-1984FLT 1985-1992XL 1972-1987Additional Information

Ignition coil and switch bracket features a natural raw finish. Ignition coil and switch bracket mounts the coil and universal key switch in the one-piece bracket.*NOTE: Mount hardware not included...

Black steel side mount tail lamp bracket for vertical mounting of license plate holder.Drill license plate holes as required. Fits:FX 1973-1984FL 1973-1984Additional Information <

Fender Trim Bumper Bracket has a Zinc finish. Fits:FLT 1980-1999FLH 1977-1984Additional Information OEM No.91090-77A

Engine mount shim has a thickness of .036". Fits: FXST 1984-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984 Additional Information UOM

Zinc starter motor bracket fits Prestolite electric starter motor. Fits:FL 1966-1981Additional Information UOM1 - EA

Billet top motor mount with holes has a chrome finish.For Panhead, Shovelhead and Evolution engines. The two holes are drilled and tapped 5/16-18UNC with a center distance of 2". Fits:FL 1948-1985FX...

Front oil tank bracket is zinc plated. Fits:FL 1965-1984Additional Information UOM1 - EA Manufacturer

Chrome cylinder air scoop brackets is for mounting an air scoop on the left side of your Big Twin Shovelhead. Bracket set has a chrome finish and makes mounting the air scoop a piece of cake...

V-Twin - 31-1015 - 10 inch Black Turn Signal Mount RearDescriptionBlack 10" rear turn signal bracket. Fits:FLHTC 2009-2013FL 1974-1984FLHR 1991-2008FLST 1986-UPFLT 1991-2008Additional Information

Black bracket set is for front fork triple tree mounting. Set includes right and left sides. Fits:FLH 1949-1984Additional Information OEM No.68603-62

Battery tray carrier bracket has a bright chrome finish. Fits:FL 1965-1984Additional Information OEM No.66212-65

Chrome alternator plug retainer bracket bolts to the front left engine mount bolt and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

Chrome side mount tail lamp bracket will mount vertical flat side unit to FXD primary. Fits:FL 1965-1984FX 1965-1984FXST 1984-1988Additional Information

Zinc plated top motor mount is without the choke mount. Fits:FL 1948-1984Additional Information OEM No.16852-67

Regulator mount bracket attaches to engine mount and is made of steel with a chrome finish. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

V-Twin - 31-0776 - Chrome 7 inch Low Boyz Turn Signal Bar KitDescription7" low boyz bar kit chrome is threaded to accept stock rear turn signals and mounts to license plate bracket holes. Fits:FL...

Top motor mount chrome is without the coil mount holes. This engine mount is for Panhead and Shovelhead engines. Fits:FX 1971-1984FL 1948-1984Additional Information

Front engine mount block threads into regulator mount block.This chrome mount block acts as a nut for the front bolts and will mount the regulator. Sold in a quantity of 2. Fits:FXST 1984-1999FLST...

Side mount bracket mounts to stock swingarm and is chrome billet. This bracket will accept vertical or horizontal billet tail lamp assemblies from our selection.Order nut set separately. Fits:XL...

Dual exhaust clamp kit is for FLH models.Order pipe support for 1958-1984 appplications separately. Fits:FL 1970-1984Additional Information UOM1 -