Electra Glide FLH

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome notch petcock with angle fitting and knob, features a 360  swivel high capacity elbow and includes a straight fitting, full reserve and lever control for on/off and reserve.Petcock features an...

Intake manifold clamp set is a two piece set with nut style clamps. Unique design will give the vintage "plumber" manifold look for later Panhead and Shovelhead models.Set includes screws, o-ring and...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome hex petcock has inward facing outlet and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on...

Sifton chrome petcock forward facing with 3/8" outlet with nut.Petcock features solid brass construction with on and off and reserve positions and screen. Designs are made for a seated position on...

Linkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. Fits:FL 1941-1984Additional Information OEM No.27375-29

Replica cadmium intake manifold clamp set features fillister head screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information OEM No

Intake manifold clamp update kit is used to update early intakes to late style seals or when intake flanges are damaged on early heads. Kit includes manifold rings, silicone seals, and stainless...

Intake manifold adapter ring set is used to update early style O-ring intake manifolds and cylinder heads to late style flat band type seals. Set includes four standard and two stroker rings. Fits:FX...

Stainlees steel power intake clamp set features a "floating bridge." Clamps close the gap under the "T" bolt for total 360  wrap around seal. This set has O-ring seals*NOTE: Includes USA made clamps...

Intake manifold adapter rings for stroker .200 taller cylind ers are used to update early style O-ring intake manifolds a nd cylinder heads to late style flat band type seals. Fits:FX 1971-1977XL...

Intake manifold adapter rings for stock cylinders are used to update early style O-ring intake manifolds and cylinder heads to late style flat band type seals. Fits:FX 1971-1977XL 1957-1977FL...

Polished stainless steel intake manifold clamp set features clamps constructed from a strong, light weight material that is very flexible and easy to install! Includes o-ring style seals.Clamp set...

Chrome petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for...

Keihin carburetor main jet is 1.80mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.75mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.70mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.65mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .88mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is 1.00mm Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT 1984-1989Additional Information

Keihin carburetor slow jet is .65mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .72mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT 1979-1989Additional Information

Keihin carburetor slow jet is .75mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .68mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Performance 47mm shorty caburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Genuine Keihin carburetor rebuild kit contains needle, proper O-rings, and diaphragm. Fits:FXR 1982-1982FX 1976-1982FL 1976-1982XL 1976-1982Additional Information

V-Twin - 35-0220 - Carburetor Idle ScrewDescriptionKeihin and CV carburetor idle screw allows for easier adjustment by hand. Fits:FL 1976-1984FXD 1991-2017FX 1971-1984XL 1976-UPFLST 1986-2017FXST...

Brass intake manifold clamp set is two piece type with o-ring type seals. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information UOM

V-Twin - 35-0134 - High Flow Fuel Inlet BrassDescriptionBrass high flow carburetor fuel inlet replaces broken fuel inlet to the carburetor bowl for modified engines. For all Keihin carburetors...

Bendix Carburetor Kit includes 38mm carburetor with adjustable main jet, throttle handle with grips, cable with bracket and 7" round air cleaner with support. Kit also includes seal adapters to use...

Chrome petcock nut Fits:FX 1975-1984FL 1975-1984FXR 1982-1994FXD 1991-2017XL 1975-1995FLST 1986-2017FXST 1984-2017Additional Information

Replica alloy intake manifold is O-ring type. Fits:FX 1971-1977FL 1966-1977XL 1966-1977Additional Information OEM No.27021-71A

V-Twin - 35-0071 - 1 inch Twist Grip Assembly ChromeDescriptionSingle 1" cable type throttle handle assembly with Anderson type grips features chrome throttle housing.Cable not included. ...

Keihin handlebar throttle and cable assembly includes single cable, grip, twist grip and bracket.The brass twist grip is in the skin packaging. NOTE: Does not include chrome end plugs. Fits:FX...

Dell'Orto 40mm carburetor kit includes throttle assembly, cable, grips, air cleaner adapter, and carburetor adapter to fit side Valve three bolt manifolds. Features adjustable accelerator pump and...

Bendix mini oval air cleaner kit features a black finish. Kit includes filter, cover, and backing plate. The cover is for single screw mounting.Air cleaner size is 30% smaller than original OEM cover...

Bendix mini oval air cleaner kit features a chrome finish. Kit includes filter, cover, and backing plate. The cover is for single screw mounting.Air cleaner size is 30% smaller than original OEM...