Electra Glide FLH

Keihin carburetor slow jet is 1.00mm Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT 1984-1989Additional Information

Keihin carburetor slow jet is .65mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .72mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT 1979-1989Additional Information

Keihin carburetor slow jet is .75mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .68mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Performance 47mm shorty caburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Natural alloy cast 1-7/8" intake manifold is the flat seal type and can be used as a stock replacement on OKO and S&S "E" Carburetors.Machined for use with S&S and OKO carburetor installations. ...

Genuine Keihin carburetor rebuild kit contains needle, proper O-rings, and diaphragm. Fits:FXR 1982-1982FX 1976-1982FL 1976-1982XL 1976-1982Additional Information

V-Twin - 35-0220 - Carburetor Idle ScrewDescriptionKeihin and CV carburetor idle screw allows for easier adjustment by hand. Fits:FL 1976-1984FXD 1991-2017FX 1971-1984XL 1976-UPFLST 1986-2017FXST...

Brass intake manifold clamp set is two piece type with flat type seals. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM

V-Twin - 35-0134 - High Flow Fuel Inlet BrassDescriptionBrass high flow carburetor fuel inlet replaces broken fuel inlet to the carburetor bowl for modified engines. For all Keihin carburetors...

Bendix Carburetor Kit includes 38mm carburetor with adjustable main jet, throttle handle with grips, cable with bracket and 7" round air cleaner with support. Kit also includes seal adapters to use...

Chrome petcock nut Fits:FX 1975-1984FL 1975-1984FXR 1982-1994FXD 1991-2017XL 1975-1995FLST 1986-2017FXST 1984-2017Additional Information

Replica alloy intake manifold is flat seal type. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information OEM No.27021-78

V-Twin - 35-0071 - 1 inch Twist Grip Assembly ChromeDescriptionSingle 1" cable type throttle handle assembly with Anderson type grips features chrome throttle housing.Cable not included. ...

Keihin handlebar throttle and cable assembly includes single cable, grip, twist grip and bracket.The brass twist grip is in the skin packaging. NOTE: Does not include chrome end plugs. Fits:FX...

Dell'Orto 40mm carburetor kit includes throttle assembly, cable, grips, air cleaner adapter, and carburetor adapter to fit side Valve three bolt manifolds. Features adjustable accelerator pump and...

Bendix mini oval air cleaner kit features a black finish. Kit includes filter, cover, and backing plate. The cover is for single screw mounting.Air cleaner size is 30% smaller than original OEM cover...

Bendix mini oval air cleaner kit features a chrome finish. Kit includes filter, cover, and backing plate. The cover is for single screw mounting.Air cleaner size is 30% smaller than original OEM...

Teardrop carburetor cover is natural cast and is made to fit linkert carburetors only.Cover features a 3 bolt hole mounting design. This is not an air cleaner. Fits:FL 1970-1984XL 1971-2006FX...

Teardrop carburetor cover is made to fit Bendix and Keihin carburetors only.Cover features a 3 bolt hole mounting design. This is not an air cleaner. *NOTE: The length of the mount screws are...

Teardrop carburetor cover is natural cast and is made to fit CV carburetors only.Cover features a 3 bolt hole mounting design. This is not an air cleaner. *NOTE: The length of the mount screws are...

Chrome OKO teardrop air cleaner assembly includes the back plate, filter and slotted cover for "easy breathing". For Bendix and Keihin butterfly carburetors.The back plate features a natural alloy...

Black OKO teardrop air cleaner assembly includes the back plate, filter and slotted cover for "easy breathing". For Bendix and Keihin butterfly carburetors.The back plate features a natural alloy...

V-Twin - 34-1687 - Black Wyatt Gatling Air Cleaner AssemblyDescriptionWyatt Gatling assembly includes round air cleaner with black mesh cover, integral breather system with bracket, and mounting kit...

Alloy air cleaner backing plate features a 3 post design to mount teardrop air cleaners.Plate is the two screw type and 160mm diameter in the round section to fit cover. Accepts Bendix-Keihin models...

Black oval air cleaner cover.Holes are 4" apart center hole to center hole. Fits:FL 1971-1984FXST 1984-1989FX 1971-1984XL 1966-2003FLST 1986-1989FLT 1979-1989Additional Information

Air cleaner mount kit includes a air cleaner to carb gasket, 1/4"-20 x 3/4" round head Phillips screw and a 1/4" external biter washer.*NOTE: Use with Bendix Keihin butterfly carburetors. Fits:XL...

Early style Bendix carburetor breather air snoot features a black cover without the filter, for Bendix and Keihin butterfly carburetors.*NOTE: Mount screws not included, must be ordered separately...

Teardrop air cleaner cover assembly is made of steel and has a smooth chrome finish. For use with Bendix and Keihin type carburetors.*NOTE: Backing plate and teardrop cover are of stamped steel...

Zinc plated ham can style large air cleaner mounting.Sold as a set of 2. Fits:FL 1978-1984FX 1978-1984Additional Information OEM No.29114-

Red lens bullet style turn signal set will appear chrome when off, but will show the color of the lens when turn signal is activated. Fits:FL 1963-1984Additional Information

Smoke lens bullet style turn signal set will appear chrome when off, but will show the color of the lens when turn signal is activated. Fits:FL 1963-1984Additional Information

Amber lens bullet style turn signal set will appear chrome when off, but will show the color of the lens when turn signal is activated. Fits:FL 1963-1984Additional Information

Vertical side mount tail lamp kit includes a chrome bracket and license plate tail lamp holder, and mini cateye tail lamp bulb type. Mounts to stock swingarm. Fits:XL 1979-1996FL 1973-1984Additional...

Vertical side mount tail lamp kit includes a stainless steel bracket and license plate tail lamp holder, and mini cateye tail lamp bulb type. For Big Twin models and will mount to primary covers...

7" headlamp unit includes a chrome rim, reflector, a H-4 and a LED bulb.*NOTE: Unit accepts either H-4 or LED bulbs, your choice for installation. Fits:FL 1960-1984FLHR 1995-2003Additional Information

V-Twin - 33-2271 - Indicator Lamp High Beam Type RedDescriptionRed high beam indicator lamp lens is single wire and fits the cowl or visor on FLH models. Fits:FX 1973-1982XL 1986-1973FL...

Replica horn kit without cover includes bracket and ISO mount rubber stud. Fits:FL 1976-1984Additional Information UOM1 - KIT

V-Twin - 33-2028 - FL Spotlamp KitDescriptionSpotlamp kit is for use with alloy cowl on 1960-84 FL models.Spotlamp kit includes 12 volt spotlamp, dual filament amber turn signal, spotlamp bracket,...