Electra Glide FLH

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Chrome steel 90  bend type turn signal mount set is used for front or rear application.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM

Cable guide clip. Fits:FL 1966-1984Additional Information OEM No.45092-66 UOM5 - PK

Battery tray carrier bracket has a chrome finish. Fits:FL 1965-1984Additional Information OEM No.66212-65 UOM<

Chrome one piece bracket is for mounting spotlamps.The length between the mounting holes measures 13". Fits:FLH 1949-1984Additional Information OEM No.

Chrome bracket set is for front fork triple tree mounting. Set includes right and left sides.The bracket measures 1-1/2" center to center between the two top holes and 6-1/2" between the top and...

Turn signal chrome mounting kit has clamp and mounting bolt included. Kit is necessary for mounting the turn signals below spotlamp unit. Fits:FL 1968-1984Additional Information

Chrome steel flat type mount set for front or rear turn signal.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM No.68527-63

V-Twin - Zinc Plated Buddy Seat Nose Bracket fits '58-'84 FL Model Front nose seat bracket is used to mount buddy seats to mount systems and features a zinc plated finish. Fitment: FL 1958-1984

Zinc regulator mount bracket attaches to engine mount. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

Chrome rectifier regulator bracket mount Fits:FL 1976-1984FX 1976-1984Additional Information OEM No.74533-75B

Black oil cooler bracket is for Sifton and Lockhart horizontal oil coolers. Fits:FXR 1982-1984FL 1958-1984FX 1958-1984Additional Information OEM

Speedometer cable guide for front wheel drive models.Sold as a pack of 5. Fits:FX 1973-1984XL 1973-1984FL 1973-1984Additional Information

Chrome starter motor bracket fits Prestolite electric starter motor. Fits:FL 1966-1981Additional Information OEM No.31476-66

Heavy duty top motor mount chrome is a 2 piece and are constructed of 1/4" steel and mounts the motor to the frame. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts the coil.This engine mount does not have the hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts coil and has a hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA<

Top engine mount replaces stock type and features a chrome finish.Mount does include choke mount for lever assembly. Fits:FX 1971-1972FL 1967-1984Additional Information

Seat T rear strap with radius corners features a raw finish. Fits:FL 1941-1980Additional Information UOM1 - EA

V-Twin - 31-0076 - Rear Seat T BracketDescriptionRear seat T bracket features a black finish. Allows police deluxe solo seat to be mounted on 2009-up FLT police bikes and 2021-up Highway King. For...

Big Twin air cleaner mount bracket. Fits:FLH 1978-1978 Early 1978FL 1978-1978 Early 1978Additional Information OEM No.29018-78

Chrome left vertical heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65707-77

Replica chrome muffler set includes four clamps. The muffler has an outside diameter of 3-1/4" and is 27-7/8" long. Set features non removable baffles.**CAUTION: These exhaust products are not legal...

Raw 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter...

Chrome 15-1/4" megaphone tip features a round end with a 1-3/4" inlet. This is the tip only.Baffles and clamps not included. Fits:FL 1958-1984Additional Information

Chrome 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter...

Bronx FL muffler tip kit includes chrome 24" muffler set. Set features two Bronx tips that fit on 1-7/8" outer diameter end. The inlet measures 1-3/4".For right or left side dual FLH muffler...

Exhaust heat shield 14" lower Y includes two worm clamps for installation. There is a notch on the end to fit other two i nto one FLH style header sets. Fits:FL 1970-1984Additional Information <

Chrome finish rear heat shield for 2:1 exhaust systems on Shovelheads features the cut out for the crossover pipe.Heat shield includes 2 worm drive clamps for installation. Fits:FLH...

Chrome 15-1/4" megaphone tip set has a 1-7/8" inlet to fit over OE style cigar mufflers. Features a round end.Set of two. Baffles and clamps not included. For use with stock OEM style cigar mufflers...

FL front exhaust header with built in y junction featuring a chrome finish. Rear pipe not included, order separately. Fits:FL 1970-1984Additional Information UOM<

Short heat shield is to fit over 1-3/4" exhaust pipes. Fits:FL 1958-1984Additional Information UOM1 - EA Measu

Rear heat shield features a chrome finish and is for the right side crossover pipe.*NOTE: Heat shield set is specifically true dual exhaust header pipe set and true dual chrome exhaust system...

Muffler includes one megaphone tip with heavy duty 1-7/8" clamp installed. Fits:FL 1958-1984Additional Information UOM1 - EA

Chrome 31" muffler kit for use with dual exhaust. Muffler is 31" long with upsweep design. Inlet end fits 1-3/4" outer diameter pipes. Muffler set includes 1-7/8" clamp set, and 3" hanger clamps...

Kit includes two 22" FLH full chrome mufflers and two 15" long megaphone tips with heavy duty 1-7/8" clamps.For use with right and left side dual exhaust! ...

Chrome muffler kit includes a single 22" muffler with 15" megaphone muffler tip and one 1-7/8" clamp.For one side. Fits:FL 1958-1984Additional Information U

Chrome heat shield set includes five pieces, two for the lef t and three for the right side to fit dual crossover systems .*Note: UPS may consider this part as packaged "oversize" for shipment, as...

Heat shield kit is for stock type two into one. Fits:FL 1970-1984Additional Information UOM1 - KIT Manufacture

Chrome 24" front heat shield has worm clamps included. Fits:FL 1970-1984Additional Information UOM1 - EA Manuf