Low Rider FXS

V-Twin - Chrome Petcock W/ Nut and 90° Left Outlet fits '75-'94 Big Twin & '75-'95 Sportster Models This petcock is designed to be used with stock gas tanks or custom tanks with a 22mm outside thread. The shape of the petcock is built for a...

The Gasbox Voltage Regulator Mount: Stainless Steel 6 x 6 x 1 Made in the USA   Fitment: 1979 - 1980 Harley-Davidson 1200 Fat Bob - FXEF 1977 - 1979 Harley-Davidson 1200 Low Rider - FXS 1971 - 1978 Harley-Davidson 1200 Super Glide - FX ...

Drag Specialties - High Performance Pressure Plate Fits '41-'E84 Big Twin Models Features Highly polished aluminum pressure plate will not warp or flex Allows smooth, positive clutch action Fitment 1984 Harley-Davidson Softail Standard FXST 1984...

Drag Specialties - 36" Black Vinyl Throttle Cable fits '74-'80 Big Twin, '74-'80 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

Colony - 8476-4 Cap Nut Dash Mounting Hardware Kit fits '77-'85 FX Model Features: Chrome plated dash mounting button allen kit Made in the USA Fitment 1983-1985 Harley-Davidson Low Rider...

Colony - 9671-20 Parkerized Transmission Kicker Cover Nut Kit fits '36-'84 Big Twin Models (OEM #7835, 7752) Features: Kits include (9) nuts, (9) flat washers, (1) nut and (1) washer Made in the U.S.A...

V-Twin - Chrome 35mm Fork Tube Set w/ 31-1/4" Length fits '75-'83 XLCH, '79-'82 XLS, '77-'83 FXS Models Fork tube set is 8" over stock with a total length of 31-1/4". Stock length is 23-1/4". Before installing, compare new and old tubes. Be sure...

V-Twin - Chrome 35mm Fork Tube Set w/ 29-1/4" Length fits '75-'83 XLCH, '79-'82 XLS, '77-'83 FXS Models Fork tube set is 6" over stock for XLH, XLXH, XLCR, 1983 XLX , XLS models, and 4" over stock for 1979-1982 XLS models. Before installing,...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '73-'84 FL, '73-'81 FX (OEM #40908-81) Features: Valve Stem: SRV (Side Rubber Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - Rear Kelsey Master Cylinder fits '79-'82 FX, '83 FXE, '80-'81 XL, 3/4” bore (OEM #42453-80A, 42454-80A) - Chrome Features: Complete rear master cylinder assembly Polished and chrome-plated Fully assembled for easy...

Colony - Transmission Mounting Hardware Kit fits '77-'84 Shovelhead Model (OEM #47730-77) Features: Kit includes two carriage bolts, one 3/8" - 16 x 1" bolt, four 3/8" - 24 nuts, six 3/8" lock washers, two washers, 5-3/8" x 3/32" washers, and two...

Colony - Motor Case Kit fits '79-'95 Big Twin Models - Cadmium Features: Contain all necessary hardware to bolt together stock motor cases Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - Seat Post Bushing fits '58-'80 Big Twin Models (OEM #47094-58) Features: Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special FLHX - - 1983-1984 Harley-Davidson Low Rider...

Colony - Transmission Top Cover Bolt Kit fits 'L79-'86 Big Twin Models (OEM #2872W, 2887W, 3802W) Features: Includes four 1/4"-20 x 2" bolts, two 1/4"-20 x 7/8" bolts, one 1/4"-20 x 11/2" bolt, two lock washers, and five flat washers Made in the U.S...

Colony - Stem Nut and Lock Washer Kit fits '99-'13 Touring, '00-'10 Softail & '06-'17 Dyna Models (OEM #45717-63, 45718-60) Features: Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the...

Colony - Transmission Kicker Cover Stud Kit fits '36-'84 Big Twin Models (OEM #24818-52, 33298-36) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - Cylinder Base Acorn Hardware Kit fits '78-'84 Big Twin Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Colony - Cam Cover Acorn Hardware Kit fits '70-'99 Big Twin Models (Except Twin Cam) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - 8224-8 Rocker Shaft End Plug fits '71-'84 Shovelhead & '71-'85 Sportster Models (OEM #17448-71A, 7875) Features: Complete sets stock-style replacement rocker shaft end plugs, nuts, and washers Made in the U.S.A...

Drag Specialties - Fat Bob-Style 3½-Gallon Gas Tank fits '48-'84 FX/ FL & Custom Frames to '84 Models Features Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks Gas caps sold...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '74-'80 Big Twin, '74-'80 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - Chrome Rear Brake Caliper fits '73-'80FL/FX Models (OEM #4400078B) Features: Mounts directly to the OEM mounting bracket Accepts OEM bolts, shims, bushing and retainer (not included) Brake pads and bleeder screw...

Drag Specialties - Oil Pump Assembly fits '73-'91 Big Twin Models This is a high-quality replacement cast aluminum pump body with steel gears and a shaft. Features Raw cast aluminum finish Gaskets and seals included; mounting hardware sold...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Stainless-Steel) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Brass) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

S&S Cycle - 3.625" Bore Shovelhead Cylinder Kit fits '66-'84 Shovelhead Engines This Bore Shovelhead Cylinder Kit comes complete with front and rear cylinders, base nuts, headbolts, base gaskets and head gaskets. NOTE: 3.625" bore cylinders require...

Old-STF Cycle - Stainless/Black Rocker Box Split Oil Line fits '66-'84 Shovelhead The Old-STF Cycle Stainless/Black Rocker Box Split Oil Line is a high-quality kit that is designed to fit Shovelhead motorcycles from 1966 to 1984. This kit features...

Thrashin Supply Co. - Aggressor Foot Pegs Features: Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek and timeless design Twelve replaceable cone-shaped stainless steel cleats per footpeg Cutaway...

James Gasket - Main Drive Gear Seal fits '37-'79 Big Twin 4-Speed Models (OEM #35230-39) Features: Top quality main drive gear shaft seals Fitment 1979 Harley-Davidson Fat Bob FXEF - Notes: 1979Fits Early 1979...

James Gasket - Pushrod Seal Set fits '79-'81 Shovelhead Models (O-Ring) Features: Convenient and efficient way to sell the correct amount of seals or O-rings for a rebuild or cam change James complete kits are neatly packaged for easy display Made...

James Gasket - Pushrod Seal Set fits '48-'79 Big Twin Models (Cork) Features: Convenient and efficient way to sell the correct amount of seals or O-rings for a rebuild or cam change James complete kits are neatly packaged for easy display Made in...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models (Gaskets, Seals and O-Rings) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the USA Note: Seals not...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Intake/Carburetor Gasket Kit fits '66-'84 Shovelhead, '79-'85 Sportster Models w/ Bendix/Keihin/​Tillotson (Butterfly Style) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Complete Motor Gasket Kit fits '70-'84 Shovelhead Models 4-Speed (Fire-Ring™ Head Gaskets (OEM #17029-70A)) Features: Top-quality gaskets, oil seals, and o-rings necessary to rebuild an XL engine Made in the U.S.A...

James Gasket - Primary Gasket Kit fits '84-'86 Touring & '84-'88 Softail Models w/ Silicone Bead Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...