1980

Stainless steel headlamp cowl screw kit. Fits:FL 1960-1984Additional Information OEM No.2824W UOM1 -

Chain guard mount kit has a zinc finish. Fits:FX 1973-1984Additional Information UOM1 - KIT FinishChr

Rear motor mount bolt kit.Order studs separately. Fits:XL 1954-1981Additional Information UOM1 - KIT Man

Cast dash panel mount studs only. Fits:FXDWG 1991-1995FXST 1984-1995FLST 1986-1995FX 1980-1986FL 1968-1984Additional Information

Transmission bearing mount plate screws measures 1/4" x 20 x 3/4". Sold in a pack of 25. Fits:FL 1980-1980 Early 1980FX 1980-1980 Early 1980Additional Information

Luggage rack strut spacers.Spacers can be used with 5/16" bolts. Sold as a set of 4. Fits:FL 1958-1984Additional Information OEM No.90908-58

3/8" Internal biter lock washers Fits: XL 1971-1984 Additional Information OEM No. 7130W UOM 25

Auxiliary seat square head bolts with a 5/16"-24 X 7/8" thread.Sold as a set of 2. Fits:FL 1965-1984Additional Information OEM No.3951B

Front motor mount spacer measures 1-1/4" X 3/8".Sold as a pair. Fits:XL 1979-1985Additional Information UOM1 - SET

Acorn type fork triple tree stem nut has a chrome finish without shoulder. Fits:FXST 1984-1999FL 1948-1984FLH 1948-1984Additional Information UO

Acorn type triple tree stem nut with shoulder, 1" - 24 thread. Fits:FXST 1984-1999FLST 1986-1999FL 1948-1984FLH 1948-1984FX 1980-1986Additional Information

Magnetic oil tank drain plug and timing hole plug prevents metal particles from circulating through engine, and oil tank. Plug is 5/8" - 18 UNF. Fits:FL 1965-1984FX 1971-1984Additional Information

Magnetic drain plug prevents metal particles from circulating through engine, and oil tanks. Plug is 3/8" - 24 UNF. Fits:FX 1971-1984FL 1941-1984Additional Information

Magnetic drain plug prevents metal particles from circulating through the transmission. Plug is 1/2" - 13 UNC. Fits:FX 1971-1984FL 1941-1984Additional Information

Magnetic drain plug prevents metal particles from circulating. Plug is 1/2" - 20 UNF. Fits:FXST 1984-1986FL 1965-1984FX 1971-1984FXR 1984-1986Additional Information

Raw steel motor mount repair bushing kit has a 3/8" inner diameter and a 1/2" outer diameter. This kit is used to align motor after frame mount repair.Drill a 1/2" hole in motor mount. The 3/8"...

Chrome front axle cap cover set is cap style. Includes right and left caps with set screws for glide type forks.Sold as a pair. Fits:FXDWG 1993-2005FLST 1986-2006FXST 1984-2006FLT 1980-1984FLT...

Allen type rocker arm shaft plugs have a chrome finish and includes sockets and cups. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR 1982-1983XL 1971-1984Additional Information

Clutch cable in braided stainless steel with clear coat fits Sportster models.Stainless steel braided with clear coat clutch cable has a PVC sleeve. The braid is tightly woven for a bright, quality...

Transmission drive speedometer cable features cadmium plating and has an outer diameter of 10mm and a length of 35". Cable has a flexible metal housing and a hex nut fitting. Includes 5/8" top nut...

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 6.5mm and is 35" long. Cable is constructed of zinc plated flexible metal casing. Fits:FLHS...

Zicad transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 10mm and a length of 35". Cable has a zi-cad plated flexible metal housing and a hex nut fitting...

Tachometer drive gear assembly features a cadmium finish. Fits:XLH 1971-1980XLCH 1971-1980Additional Information OEM No.92097-71

Black clutch cable feature heavy duty construction designed for reliability and longer service. This 64.56" long cable is 12" over stock. Fits:FL 1970-1984FXEF 1984-1985FXS 1977-1982FXST...

Right side speedometer drive is for 2:1 ratio and the front wheel only. Speedometer drive has a .750 axle hole and a spacer. The spacer width is .268 and has an overall length of .789. Features a...

Chrome plated transmission drive speedometer cable with 5/8" top nut. This cable has a length of 35" and has a chrome plated flexible metal housing with a hex nut fitting, for the transmission drive...

Stainless steel braided clutch cable has a casing length of 60.56". Cable is 8" over stock length.Features a heavy duty construction designed for reliability and longer service. Fits:FX 1971-1984FL...

Throttle cable ends for Keihin carburetor. Fits:XL 1976-1980FL 1976-1980FX 1976-1980Additional Information OEM No.56508-76 <

Black front wheel drive speedometer cable with 12mm top nut. This cable has a length of 40". Fits:FLHTC 1989-1992FLHTCU 1989-1992FLT 1980-1991FLTCU 1989-1991FLTC 1980-1984FLTC 1989-1992Additional...

Carburetor choke wire. Fits:FXS 1973-1984XL 1979-1980 early 1980FX 1973-1984Additional Information OEM No.29216-73

Cable ferrule set for the carburetor lever connection cable end.Sold as a set of 10. Fits:FLT 1982-1984FLT 1979-1984FL 1974-1984FX 1974-1984FXR 1982-1984XL 1974-1984Additional Information

One piece billet twist grip tube is for single or dual cable applications. Machined from aluminum bar stock. Fits:FL 1975-1996FX 1973-1996Additional Information

Chrome carburetor choke knob. Fits:FL 1971-1984FXST 1984-1989FLST 1986-1989Additional Information OEM No.29214-71

Black carburetor choke knob.*NOTE: The knob is threaded to go onto the shaft. Fits:FL 1971-1984XL 1972-1978Additional Information OEM No.2

Black tachometer cable has a length of 35.00". Fits:XL 1974-1980Additional Information OEM No.92065-74 UOM

V-Twin stainless steel braided throttle cable has a casing length of 33". Cable is stock length. Fits:XL 1976-1980FL 1976-1980FX 1976-1980Additional Information

Speedometer cable adapter allows the aftermarket speedometers with a male threaded fitting to be converted to female to accept an original cable.For use with early 1936-1961 cable. Fits:EL...

Speedometer 23 tooth drive unit includes housing and gear as OEM replacement for transmission drive.Speedometer drive unit measures: 2.279" shoulder to gear end. Order gasket and screw...

Speedometer 23 tooth drive unit includes housing and gear as OEM replacement. Unit has a 1:1 drive ratio.Speedometer drive unit measures: 2.312" shoulder to gear end. Order screws and...

Right side speedometer drive is for front wheel only with a speedometer with a 2240:60 ratio.Speedometer drive unit has an .750 axle hole, and includes a .586 wide spacer with an overall length of 1...