1980

Bottom engine mount replaces the stock engine mount on rubber mounted engines. The mount plate is chrome steel with a polyurethane bushing assembly.Urethane motor mount utilizes formulated compounds...

Universal front solo seat mount includes mount and tilt up seat bracket for solo seats. Lower bracket is direct bolt onto FLH frames.The spacing between the hinge lugs measure 1-5/8". The stud thread...

Black one piece design with hardware stock style updated bracket includes nuts welded to bracket to accept cover mount screws and washers which mounts to the existing studs.Order mount studs...

Chrome front engine mount assembly includes bracket, link, and ISO mount with hardware. Fits:FXR 1982-1994FLT 1979-2007Additional Information UOM

Replica cadmium seat post and T kit includes fully assembled heavy duty cadmium plated post with a forged steel seat T, and related hardware.*Note: UPS may consider this part as packaged "oversize"...

Replica black seat post and T kit includes fully assembled post and forged steel seat T with related hardware.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the...

Replica chrome seat post and T kit includes fully assembled post and forged steel T and related hardware.Stock seat T will work for mounting buddy seats with the use of #31-0177 Front Nose Bracket. ...

Police type solo seat mount kit includes nose bracket, 2" hair pin springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM

Police type solo seat mount kit includes nose bracket, 2" chrome coil springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM

Stainless steel alternator plug retainer bracket bolts to the front left engine mount bolt, and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT...

Chrome Horn mount bracket. Fits:FLH 1968-1984FL 1968-1984Additional Information OEM No.69131-68 UOM

V-Twin - 31-0517 - Chrome 8-3/4 inch Turn Signal Mount Bar RearDescription8-3/4" chrome bracket is constructed of formed and welded steel which offers the greatest strength against vibration.The...

Replica chrome seat tee includes 2 stage front bushing and 3/8" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Fits:FL 1965-1980G...

Solo seat T will mount police and buddy seats to all big twins with seat posts. Fabricated from square solid steel and features a black finish. Does not include bushing.Front spool has 3/8" hole for...

V-Twin - 31-0510 - Chrome 1-3/4 inch Universal Solo Seat Nose BracketDescriptionChrome 1-3/4" universal solo seat nose bracket allows the seat to be mounted to frame tubes or mount brackets.*NOTE:...

V-Twin - 31-0494 - Chrome 13 inch Turn Signal Mount Bar RearDescription13" chrome bar is constructed of formed and welded steel which offers the greatest strength against vibration.Threaded length on...

Front motor mount frame spacer will allow installation of a Knucklehead or Flathead engine in a 1948-1984 frame.The mount holes measure 3-1/4" center-to-center. *NOTE: The...

V-Twin - 31-0472 - Tail Lamp Bracket for Bobbed FendersDescriptionChrome tail lamp bracket for a bobbed fender Fits:Replacement application for fenderReplacement application for fender on 1972-1984...

Zinc plated carburetor support bracket mounts to air cleaner backing plate.Mounts to mount stud at tappet base. Fits:XL 1957-1985Additional Information OEM

Swingarm bushing assembly rear is manufactured to meet or exceed OEM specifications.Set of two. The units are assembled and includes steel bushings and rubber bushings only, tolerance ring sold...

Rear swingarm tolerance bushing ring helps in the stabilizing of your motorcycle. Ring is manufactured to meet or exceed OEM specifications for long lasting durability and performance.Sold in a...

Swingarm rubber mount bushing Fits:FLT 1980-2001FXR 1983-1994Additional Information OEM No.47564-86B

Chrome saddlebag supports are designed to fit the contour of the fender struts and protect your bags from the brake caliper and swingarm.Sold in a quantity of 2. Fits:XL 1979-1981Additional...

Solo seat hardware mount kit includes nose brackets, 2" high springs and rear brackets.Use this kit to mount smaller solos such as K or CH types. "P" clamps are not included in this kit. To mount...

Replica black seat T includes 2 stage front bushing and 3/8" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Fits:FL 1965-1980G 1965-1972Additional...

Billet top motor mount with holes features a chrome finish.The two holes are drilled and tapped 5/16-18UNC with a center distance of 2 Fits:FX 1979-1984FLST 1986-2005FL 1979-1984FXST...

Zinc dash mount cross bracket features center hole for mounting. Bracket allows mounting of dash kits with GPS speedometer and tachometer to 1973-1984 FXE models.*NOTE: Accepts dash mount kit to...

Zinc plated steel top motor mount features choke tab. Fits:FX 1971-1972FL 1977-1984Additional Information UOM1 - EA

Stanchion only is black for Big Twin models.These are only the stanchions from our turn signal mounting kit used for mounting the turn signals below the spotlamp unit. These do no include clamps...

V-Twin - 31-0344 - Upper Fairing Bracket Repair KitDescriptionUpper fairing bracket repair kit repairs both left and right fairing brackets without removal of the upper brackets from your motorcycle...

Trumpet horn mount bracket for Shovelhead models. Fits:FL 1966-1984 ShovelheadAdditional Information UOM1 - EA

Pipe clamps for crossover exhaustsSold in a quantity of 2. Fits:XL 1975-1980Additional Information OEM No.65412-75

Limiter kit dampens extreme movement on front motor mount cushion. Fits:FXR 1982-1994FLT 1979-2008Additional Information UOM1 - KIT <

V-Twin - 31-0271 - License Plate Frame Bracket Kit ChromeDescriptionLicense plate kit includes stock style 3-hole bracket assembly, license backing plate, frame and 4 krommets.For show or off road...

Stanchion only is chrome for Big Twin models.These are only the stanchions from our turn signal mounting kit used for mounting the turn signals below the spotlamp unit. These do not include clamps. ...

Washer is zinc and used with 31-0121, 31-0155 or as a stock replacement part. Pack of 5. Fits:FXR 1982-1994FLT 1979-2008Additional Information OEM No.

V-Twin - 31-0255 - Turn Signal Mounting Clamp Screw KitDescriptionTurn signal mounting kit contains 4 pieces, 2 short and 2 long screws. Fits:FXST 1984-UPFX 1973-1984XL 1973-UPFXR 1984-1994Additional...

Chrome stabilizer link is used with front engine mount or as a stock OE replacement. Fits:FXR 1982-1994FLT 1979-2008Additional Information OEM No.

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Chrome bracket set for front fork triple tree spotlamp mounting includes both right and left sides.The mounting holes measures 7-1/4" from eye to eye. Fits:XL 1952-1985Additional Information