1981

Colony - Transmission Top Cover Bolt Kit fits 'L79-'86 Big Twin Models (OEM #2872W, 2887W, 3802W) Features: Includes four 1/4"-20 x 2" bolts, two 1/4"-20 x 7/8" bolts, one 1/4"-20 x 11/2" bolt, two lock washers, and five flat washers Made in the U.S...

Colony - Headlamp/Cowl Screws Set fits '60-'84 FL Model, '60-'73 Servi-Car Features: Duplicate of screws 2661W and 2662W Fitment: 1960-1979, 1981 Harley-Davidson FL - -

Colony - Stem Nut and Lock Washer Kit fits '99-'13 Touring, '00-'10 Softail & '06-'17 Dyna Models (OEM #45717-63, 45718-60) Features: Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the...

Colony - Transmission Kicker Cover Stud Kit fits '36-'84 Big Twin Models (OEM #24818-52, 33298-36) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - Cylinder Base Acorn Hardware Kit fits '78-'84 Big Twin Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Colony - Cam Cover Acorn Hardware Kit fits '70-'99 Big Twin Models (Except Twin Cam) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - 8707-6 Oil Pump Plug Kit fits '81-'84 Big Twin Models Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - 8224-8 Rocker Shaft End Plug fits '71-'84 Shovelhead & '71-'85 Sportster Models (OEM #17448-71A, 7875) Features: Complete sets stock-style replacement rocker shaft end plugs, nuts, and washers Made in the U.S.A...

Drag Specialties - Fat Bob-Style 3½-Gallon Gas Tank fits '48-'84 FX/ FL & Custom Frames to '84 Models Features Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks Gas caps sold...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 30" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - 48" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - 55-7/16" Black Vinyl High-Efficiency Clutch Cable fits '80-'82 FLT/ FLTC Models - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth...

Drag Specialties - 54" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 10" Front Center Hub Mount Brake Rotor Shovelhead - Stainless Steel (Repl. OEM #41806-72B/ 41813-79) Features: Ground finish Drilled for better heat dissipation and improved brake performance in wet weather Designed for use with...

Drag Specialties - 10" Rear Vintage Drilled Brake Rotor Shovelhead - Polished Stainless Steel (Repl. OEM #41806-72B/ 41813-79) Features: Drilled for better heat dissipation and faster braking in wet...

Drag Specialties - Front Brake Caliper fits '72-'84 Touring Models (OEM #4400880) Features: OEM-style calipers in chrome finish Complete with all necessary mounting hardware and brake pads Check caliper-to-wheel clearance on custom wheels...

DP - Heavy-Duty Clutch Kit fits '71-E'84 Sportster Models This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to store and transport parts, tools or...

Drag Specialties - Oil Pump Assembly fits '73-'91 Big Twin Models This is a high-quality replacement cast aluminum pump body with steel gears and a shaft. Features Raw cast aluminum finish Gaskets and seals included; mounting hardware sold...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Stainless-Steel) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Brass) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

S&S Cycle - 3.625" Bore Shovelhead Cylinder Kit fits '66-'84 Shovelhead Engines This Bore Shovelhead Cylinder Kit comes complete with front and rear cylinders, base nuts, headbolts, base gaskets and head gaskets. NOTE: 3.625" bore cylinders require...

Old-STF Cycle - Stainless/Black Rocker Box Split Oil Line fits '66-'84 Shovelhead The Old-STF Cycle Stainless/Black Rocker Box Split Oil Line is a high-quality kit that is designed to fit Shovelhead motorcycles from 1966 to 1984. This kit features...

Prism Supply Co. - Natural Stainless Steel Footpeg Support Bar Set fits Shovelhead/ Evo Motors w/ Cone Open Primary This Footpeg Support Bar Set is designed for frames featuring an installed "cone" type motor. It accepts female chopper footpegs that fit...

GMA - Classic Chrome 2-Piston Front Brake A-Caliper fits '73-'84 FLH Models (Single Disc) These front brake calipers are constructed with billet aluminum with a smooth or classic "fin" design. The single-disc applications require the 5/8" bore master...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

Duro HF261A Excursion 130/90-16 Front/Rear Tire Tire construction designed for front or rear application Long-wearing rubber compound and rain-fighting groove tread design Tires have been known to run 10,000 miles or more under ideal...

Dunlop American Elite MH90-21 Front Tire These American Elite tires by Dunlop are size MH90-21 and are made for use on Harley Touring and Cruiser type models. Features: The only replacement motorcycle tires for Harley-Davidson® bikes...

Drag Specialties - Buckhorn 1" Handlebars - Notched for TBW Drag Specialties 1" Buckhorn style handlebars for Harley model and custom applications. These bars are notched for Throttle By Wire (TBW) applications. Features: Available in a Chrome,...

Jims - Primary Cover Inspection Plug Tool fits '57-'90 Sportster Models Features: Use this tool to remove and install primary inspection plug Made in the USA

Jims - Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Softail...

Jims - Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...

Jims - Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street Glide...

Jims - Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the...

Jims - Swingarm Bushing Tool fits '80-'01 FLT/​FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames Features: Allows installation of delicate, silicone cleveblock bushings in swingarm without damage Tool presses on outer sleeve of bushing Can...

Jims - Main Drive Gear Bearing Tool fits '79-'84 4-Speed Big Twin Models Features: Use to install the main bearing (Harley-Davidson® #8905) to the correct depth Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Jims - Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A. Fitment 1989 Harley-Davidson Tour...