1981

40 spoke extra wide offset dual flage rear hub features a chrome finish. The drive side is offset 0.875" further out than standard 1973-1985 style hubs. Includes 3/4" bearings, races, seals and seal...

Chrome wheel hub is constructed of steel and includes 3/4" bearings, races, seals, and seal spacers.This hub has 3/8" and 7/16" disc mount holes. The width of the hub through the axle measures 7"...

Front wheel hub satin finish is without internals.The bearing housing 45mm. Fits:FXE-80 1978-1983FXRS 1982-1983FXEF 1978-1983FXR 1982-1983XL 1978-1983FXE 1978-1983FX 1978-1983FXEF-80...

Chrome front wheel hub include bearings, races, seals, and seal spacersWhere the rotors bolt on, from flange to flange, measures 4-1/16". Fits:FXE-80 1978-1983FXEF 1978-1983 dual discFX 1978-1983...

Steel rear hub without internals. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - EA Locat

Chrome front wheel hub includes bearings, races, seals, and seal spacers. Features steel construction.This hub has 5/16" disc bolt holes for 1980-1983 dual disc. Distance between the rotors measures...

This standard nipple set is 22mm long and is cadmium plated.Set of 40 pieces. Fits:FL 1941-1984Additional Information UOM1 - SET

V-Twin - 45-0155 - Cadmium 19 inch Spoke SetDescriptionFront cadmium spoke set features 20 long and 20 short shanks with spoke nipples.Spokes are easy to clean and maintain. For use on a drop center...

V-Twin - 44-2060 - Swingarm KitDescriptionKit includes 2 offset steel bushings and 2 alloy washers. Fits:FLT 1980-2006FL 1980-2006FLHTC 1980-2006Additional Information

V-Twin - 44-2058 - Swingarm Mounting KitDescriptionKit comes with two bushing assemblies, spacers, plastic retainer rings, rubber isolators, one pivot shaft with lock nuts, washer, and sleeve, and...

V-Twin - 44-2052 - Replica Swingarm Pivot ShaftDescriptionSwingarm pivot shaft is replica of OE type pivot shaft. Fits:FLT 1980-1981Additional Information

V-Twin - 44-2051 - Rear Axle Spacer 3/4 inch Inner DiameterDescriptionZinc rear axle spacer smooth style has an overall length of 15/16". Fits:FL 1973-1982 Cast and Wire WheelFXST 1984-1986FX...

V-Twin - 44-2039 - Swingarm Retaining Ring PlasticDescriptionPlastic swingarm retaining ring. Fits:FXR 1987-1994FLT 1980-2001Additional Information

V-Twin - 44-2034 - Wheel Hub Bearing Tube Spacer 4.448 inch Overall LengthDescriptionFront or rear wheel hub bearing tube white spacer. This spacer measures 4.448" overall length for use on cast...

V-Twin - 44-2033 - Wheel Hub Bearing Tube Spacer 4.434 inch Overall LengthDescriptionFront or rear wheel hub bearing tube yellow spacer. This spacer measures 4.434" overall length for use on cast...

V-Twin - 44-2032 - Wheel Hub Bearing Tube Spacer 4.420 inch Overall LengthDescriptionFront or rear wheel hub bearing tube red spacer. This spacer measures 4.420" overall length for use on cast wheels...

V-Twin - 44-2027 - Front Wheel Hub Bearing Shim .032 ThickDescriptionWheel hub bearing shim is .032 thick. Fits:FXR 1982-1994FLT 1979-1999Additional Information

V-Twin - 44-2009 - Chrome Rear Axle Adjuster End Plate SetDescriptionChrome rear axle adjuster end plate set.Sold as a pair Fits:XL 1979-UPFX 1973-1984FL 1973-1984Additional Information

V-Twin - 44-1996 - Swingarm Pivot Pin with 1 inch Longer PinDescriptionSwingarm pivot pin is 1" longer.Order nut separately. Use with a 5/8" X 18 threads per inch nut. Fits:FX 1971-1984FL...

V-Twin - 44-1981 - Wheel Hub Bearing Tube Spacer 2.536 inch Overall LengthDescriptionFront wheel hub bearing tube gold spacer is 2.536" overall length and may be used in some cast mag wheel...

V-Twin - 44-1980 - Wheel Hub Bearing Tube Spacer 2.550 inch Overall LengthDescriptionFront wheel hub bearing tube pink spacer is 2.550" overall length and may be used in some cast mag wheel...

V-Twin - 44-1976 - Wheel Hub Bearing and Seal KitDescriptionWheel hub bearing and seal kit is a deluxe kit which includes 2 of each type of seal and 2 tapered bearings. Also used for swingarm...

V-Twin - 44-1973 - Chrome Swingarm Pivot KitDescriptionChrome swingarm pivot kit includes races, bearings, spacers, lock tab, and pivot pin. Fits:FX 1976-1984FL 1973-1984Additional Information

V-Twin - 44-1960 - Swingarm Pivot Bolt KitDescriptionSwingarm pivot bolt kit includes swingarm pivot bolt in chrome, race set, bearing set, and lock tab. Fits:XL 1974-1981Additional Information

V-Twin - 44-1957 - Rear Axle KitDescriptionRear axle kit includes a 11-7/8" bearing surface length axle, pyramid adjuster blocks and chrome nuts. Fits:FX 1973-1984 Chain Drive, rear axleFLH 1973-1984...

Axle with hex head and a threaded end has a 10-3/4" bearing surface length. This can be used to replace a worn out or damaged axle for swingarm frames. Fits:FX 1973-1984 application for swing arm...

Axle with threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Includes spacers and nut. Fits:FXST 1985-2006FLST 1986-2006FLT 1980-1984FLT...

V-Twin - 44-0599 - Chrome Front Axle Nut and Washer KitDescriptionChrome front axle nut & washer kit. Fits:FXST 1984-UPFLST 1986-UPFL 1973-1984FX 1980-1983Additional Information

Kit includes 7-7/8" bearing surface length axle and nut kit. Fits:FXR 1982-1983XL 1978-1983FX 1978-1983Additional Information OEM No.43

Kit includes chrome 10-5/8" bearing surface length axle with 3/4" outer diameter, nut kit, 2 spacers and washers. Fits:FXST 1984-2006FL 1973-1984 41mm forksFX 1980-1983 41mm forksAdditional...

Kit includes 10-5/8" bearing surface length axle, nuts, spacer and hardware. Fits:FLH 1981-1984Additional Information OEM No.43867-81

Kit is includes 10-1/8" bearing surface length axle, spacer and nut kit. Fits:FL 1973-1980FX 1980-1983Additional Information OEM No.43875-73

Chrome rear axle kit includes 11-1/4" axle and nut kit. Fits:XL 1979-1999Additional Information OEM No.41563-77

Kit includes chrome 11-7/8" bearing surface length, axle, nuts, and spacer. Fits:FX 1973-1984FL 1973-1984Additional Information OEM No.41552-73<

V-Twin - 44-0554 - Brake Disc SpacerDescriptionzinc spacer has an outer diameter of 7/16" and an inner diameter of 5/16", with a 5/16" length.Brake disc spacers will adapt 1973-up FX, FL rear hubs to...

Pull adjuster only. Fits:FX 1985-1985FX 1973-1984FL 1973-1984FL 1985-1985Additional Information UOM1 - SET

Assembly includes race, bearing, dust shield, bearing spacers.Also included are the pivot pin, bolt, nut, spacer, right swingarm lock nut and lock tab. Fits:XL 1974-1981Additional Information

V-Twin - 44-0520 - Chrome Rear Axle Nut KitDescriptionChrome axle nut kit includes a 5/8"-18 hex nut, 2 extra thick washers and 1 lock washer.For use on square swingarms. For 3/4" axles, universal. ...

Chrome 3/4" axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Axle features a chrome finish.Does not have hole for cotter...

Rear wheel hub bearing assembly kit includes all parts except hub and internal bearing spacer.For use on cast or wire wheels. Fits:XL 1979-1981 Cast or Wire Wheel FitmentAdditional Information