Electra Glide Sport FLHS

Battery top set is a six piece set. Fits:FL 1965-1984Additional Information UOM6 - SET ManufacturerV-

V-Twin - 53-0501 - 12 Volt AGM H-12 Sealed Battery BlackDescriptionAbsorbed Glass Mat technology proposes the best balance between cold cranking amps and amp hour capacity.AGM battery is fully sealed...

V-Twin - 52-2034 - 17 inch x 4.5 inch Replica Rear Spoke WheelDescription17" x 4.50" Replica wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.The hub is 6" in length...

Replica 16" X 3.50" wheel assembly features chrome rim, 40 polished stainless steel spokes, chrome hub with internals.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

16" x 3.00" front or rear wheel assembly includes a chrome hub, chrome spokes and a chrome drop center rim, with bearings and seals installed. Fits:FL 1973-1984Additional Information

Replica 16" X 3.00" single disc wheel assembly features a black rim, 40 chrome spokes and a black hub with internals.This wheel has a large valve stem hole to accept rubber valve stems. The hole for...

16" x 3.00" front or rear KH style wheel assembly includes a black hub, zicad plated spokes and a chrome drop center rim, with bearings and seals installed.*NOTE: Zicad is a dull shade of zinc...

16" x 3.00" front or rear KH style wheel assembly includes a black hub, zicad plated spokes and a black drop center rim, with bearings and seals installed.*NOTE: Zicad is a dull shade of zinc similar...

Front 23" x 3.00" wheel assembly features chrome spokes, chrome hub, and chrome rim.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will...

Replica 16" X 4.00" front or rear wheel assembly features chrome rim, 40 stainless steel spokes, chrome hub with internals.Rim accepts side valve and rubber stem. NOTE: All spokes on wheel need to be...

Replica 16" X 4.00" front or rear wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Front or rear 16" x 3" wheel with chrome drop center rim, chrome hub with 3/4" bearings installed, and 40 twirled chrome spokes.NOTE: All spokes on wheel need to be inspected and re-torqued after 500...

Replica 21" X 1.85" wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original...

Replica 19" X 2.50" wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original...

Replica 21" X 1.85" wheel assembly features chrome rim, 40 stainless steel spokes, chrome hub with internals.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original...

Replica 19" X 2.50" front or rear wheel assembly features chrome rim with 40 stainless steel spokes, and chrome hub with internals.NOTE: All spokes on wheel need to be inspected and re-torqued after...

Replica 16" X 3.00" single disc front or rear wheel assembly features chrome rim with small center hole for valve stem, 40 chrome spokes, chrome hub with inernals.*NOTE: Rim features small center...

Replica 18" X 4.25" wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual...

Replica 16" X 3.00" single disc wheel assembly features chrome rim, 40 stainless steel sokes, chrome hub with internals.*NOTE: Rim features small center hole for metal stem tube. Fits:FX 1973-982...

Wheel and caliper kit includes a chrome wheel assembly, chrome caliper, chrome 51 tooth sprocket, rear drilled disc, bolts, chrome caliper bracket, support spring, and chrome stay bar with bolts...

16" x 3.0" front or rear wheel assembly includes chrome profile smooth rim, chrome hub with 3/4" bearings and internals installed, chrome spokes.Wheel has a 3/8" disc hole and 7/16" sprocket mount...

Chrome 16" x 3.0" wheel assembly is laced and trued with bearings installed.Includes a drilled 11-1/2" steel brake disc and a chrome 51 tooth sprocket. Chrome bolts are supplied for each side. ...

Chrome 16" x 3.0" wheel assembly is laced and trued with bearings installed.Includes drilled 10" steel brake disc and a chrome 51 tooth sprocket. Chrome bolts are supplied for each side. ...

XR Front or rear wheel includes a chrome hub with internals installed stainless steel spokes and nipples, a chrome 19" x 3.0" steel rim and a rim strip. For use with a dirt tire.Features a 8.5mm...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

Replica 16" X 3.00" wheel assembly features drop center chrome rim, 40 stainless steel spokes, chrome hub with internals, for front or rear applications.The hole for the valve stem that is located on...

Replacement tank mounts can be used on Fat Bob tanks and also on custom frames where the mounts do not exist. Fits:FL 1955-1984Additional Information UOM

V-Twin - 51-1955 - Replica inchHM inch Straight Leg Rigid FrameDescriptionReplica "HM" straight leg rigid frame is an authentic reproduction of the 1954-1957 straight leg frame with stock 30  neck...

Engine mount shim is used to raise motor for front or rear clearance, when necessary.Sold in a pack of 5. Fits:FL 1941-1999EL 1936-1952Additional Information

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

Replica swingarm frame is our authentic reproduction of FLH style to accept a Panhead or Shovelhead engine, 4-speed transmission, seat post, and accepts a round or square swingarm. All components are...

Replica swingarm frame is an authentic reproduction of FLH style for 1965-1984.Frame accepts Panhead or Shovelhead engine, 4-speed transmission, 12v battery and round swingarm for drum brake...

This replica authentic style frame neck web repair section must be welded in after cutting stock or custom frame. It features the right side lock housing.Order new lock assembly, separately. Fits:FL...

Engine bar set features left and right sides.Two piece set. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Engine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide)...

Rigid hardtail frame raw steel rear section is 1957 style replica construction with components featuring the factory details of the period.The rear transmission mounts are 2" from the bottom cross...

Raw finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications. Swingarm is for use...

Replica rear hardtail frame section is duplicated from an original rigid frame of 1957. Left axle plates are forged steel as OE. Weld-on type. The axle slots are 7/8" on both sides.Full replica...

Chrome finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications.Lowers bike 1/2"...

Lower frame gas tank mount set is without cross bracket. It includes the right and left tabs. Tabs are constructed of st eel and have a raw finish.May require finishing prior top installation and...