Electra Glide Sport FLHS

This 5th Mount transmission frame repair tab is weld on style for stock frames. The tab is constructed of steel and has a raw finish.May require finishing prior to installing. Fits:FX 1971-1984FL...

Rear pipe frame tab. Fits: FL 1958-1984 Additional Information UOM 1 - EA Manufacturer V-Twin

Brake line tee tab. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA Manufacturer

Upper shock frame mounts are weld on style for stock frames.Sold as a set of two. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1

Casting top seat mount is for frame seat post, frame back bone and frame upper seat rail yoke. Fits:FL 1958-1984Additional Information UOM1 - EA

This weld on style coil mount frame block set repairs stock frames and has a 3/8"-24 UNF thread. Fits:FL 1956-1983FX 1971-1983Additional Information UOM<

Rigid frame front oil tank mount casting to be welded on.Thread is 5/16 x 24 and the lip from the bottom to the top measures 1-1/4". For use with 1-1/2" bar. Fits:FL 1941-1984FX 1972-1984EL...

Rear frame engine mount and front transmission mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA

Rear tank frame mount tabs. Fits:FL 1941-1984EL 1936-1947U 1937-1948Additional Information UOM1 - SET

Weld on frame footpeg mount without thread.Mount can be welded to 1958-1977 swingarm frames to utilize the stock FXE mount and raise the peg position. Sold as a pair. Fits:FX 1971-1978FL...

Replica rear hardtail frame section is duplicated from an original rigid frame. Weld-on type and does not have seat post bushing.The rear transmission mounts are 1-1/2" tall. This hardtail includes...

Beaded windshield is a fixed mount type which comes completely assembled.Includes beaded windshield top and an adjustable lower windshield to fit FL aluminum headlamp cowl assembly. The center bolt...

Top beaded windshield measure 18" and is for use on fiberglass fairings only.Fits 1969-1984 FLH 4 speed and 1980-1985 FLT 5 speed models with Batwing fairings. Fits:FLT 1980-1985FLH...

Top beaded windshield is short style. Fits:FLH 1949-1984Additional Information OEM No.58020-49A UOM1

Frame saver mounting kit for gas tanks must be welded to Big Twin stock or custom frames. Casting features provision for damper pin, as required on 1949-1984 Big Twins.*Note: Includes speedometer...

Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post, axle, and transmission plate already installed. The legs are smooth and do not have horn mount...

Solid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in place. Fits:FL 1958-1984Additional Information

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Tool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary cover. Fits:FX 1977-1984FL...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

V-Twin - 10-0003 - S&S Stock Bore Shovelhead Engine Crankcase SetDescriptionCrankcase set comes ready to assemble.S&S Crankcase Sets are shipped set-up with Timken left side bearing and race...

Drag Specialties - DS324116 - Battery Top Cover - '65-'84 FLHFeaturesChromed replacement battery top cover fits precisely and features vibration-absorbing cushionsSpecs

Drag Specialties - DS317462 - Battery Strap - '70-'84 FL/FLHFeaturesHigh-quality replacement battery strapsMeets or exceed OEM specificationsSpecs

Drag Specialties - DS310040 - Shock Top Cap - Chrome - '58-'64 FLFeatures3/8” longer than stock for a better fitCome with polished stainless steel clamps, screws and nutsFor all swingarm Harleys with...

Drag Specialties - DS253484 - Passenger Footpeg Mount - With Clevis - FL/FXFeaturesChrome passenger footpeg mounting plates and clevis replace the rear footrest bracketsAny male mount pegs can be...

Drag Specialties - DS246010 - Rocker Oil Line Set - Chrome - ShovelheadFeaturesChromed steel overhead oil line set includes crossover line and crankcase-to-rocker box lineComplete with fittings and...

Drag Specialties - DS243817 - Mounting Kit for FL-Style SpeedometerFeaturesUsed for mounting speedometers found in cast dashesKit includes rubber grommets, pins and clipsReplacement Part for OEM...

Drag Specialties - DS222777 - Steering Stem Bearing Adjusting Nut - '49-'17 BT Features Steering stem bearing adjusting nut Replacement Part for OEM...

Drag Specialties - DS195054 - Swingarm End Cap Adjusters - '73-'86 Big TwinFeaturesFeatures die-cast construction with highly chromed finishDelivers increased rear axle adjustmentFits models with...

Drag Specialties - 24020162 - Cover - Bolt - Deep - Hex - BlackFeaturesDesigned to fit stock-style, 3/4" front axles with 7/8" head and 1/2" hex nut (3/4" wrench size)Attach with silicone (silicone...

Drag Specialties - 24010851 - Screws with/Washers - Damper TubeFeaturesKit includes two black socket-head bolts and two copper washersReplacement Part for OEM Number(s):4540575ASpecs

Drag Specialties - 22100346 - 5" KPH FL-Style 2:1 Speedometer - '68-'84 Black FaceFeaturesSpeedometers have 12mm threadTo install speed heads on 47-67 FL, use cable adapter PART #2210-0062 (sold...

Drag Specialties - 22100345 - 5" KPH FL-Style 2:1 Speedometer - '89-'95 Black FaceFeaturesSpeedometers have 12mm threadTo install speed heads on 47-67 FL, use cable adapter PART #2210-0062 (sold...

Drag Specialties - 21130669 - Black Battery Cable Set - '65-'84 FLFeaturesBlack cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and...

Drag Specialties - 21130216 - Battery Kit - CHD4-12FeaturesMSDS Migration DataDrag Specialties Conventional batteries are built to the same exacting specifications and quality-control standards as...

Drag Specialties - 21130298 - Battery Cover - Smooth - ChromeFeaturesFeatures precise formed covers for sealed and conventional batteriesThe use of AGM sealed maintenance-free batteries requires...

Drag Specialties - 21121204 - 32A Charging Kit - Black RegulatorFeaturesKit includes an encapsulated magnetic rotor, precision-wound stator and an 89-99 32A chrome voltage regulatorFeatures a thick ...

Drag Specialties - 21121071 - Regulator - BT '81-'88 - ChromeFeaturesFully assembled in the USA with domestic made electrical boardsTested three different times during the assembly process to ensure...