Tour Glide Classic FLTC

Swingarm bearing and race is for 3/4" axle.The cup outer ring has a 1.781" outside diameter, cone inner ring has a .75" inside diameter. Cone and cup assembly have a .656" width. Bearing and race are...

Pyramid axle adjuster blocks.Order nut kit separately. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information UOM1 - SET

Die cast chrome pyramid end caps with solid block type pull adjusters for 3/4" axles. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information

Front or rear wheel hub bearing tube white spacer. This spacer measures 4.448".For use on steel dual flange hubs. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999XL 1979-1999 RearFX...

Front or rear wheel hub bearing tube yellow spacer. This spacer measures 4.434".For use on steel dual flange hubs. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999XL 1979-1999 RearFX...

Adjuster kit includes the adjuster pill and chrome end plates. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information OEM No.4

Axle adjuster bolts onlyThread size is 5/16-24. Fits:XL 1985-1996FX 1973-1984FL 1973-1984Additional Information OEM No.41570-77

Zinc front axle spacer has an inner diameter of 3/4" for left side application. Spacer has an overall length of 1/2". Fits:FL 1973-1984FX 1980-1983Additional Information

Zinc plated .750 rear axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle.The axle features a 3/4" outer diameter with a...

3/4" axle with hex head and threaded end has a 11-1/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLT 1980-1999FLST 1986-2006FXST 1984-2006FXR...

Axle with a hex head and a threaded end with a 11-7/8" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FX 1973-1984FL 1973-1984Additional Information

Axle with threaded end and a 10-5/8" bearing surface length can be used to replace a worn out or damaged axle.Order nut kit separately. Fits:FL 1981-1985Additional Information

Triple stepped axle with threaded end has a 10-1/8" bearing surface length and can be used to replace a worn out or damaged axle.The outer diameter of the first step down towards the threads is ...

Rebuilt kit includes spacers, bearings, races, seals, and lock tab. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Bearing and seal kit includes tapered bearings, races, and seals. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Black pivot bolt. Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47510-58 UOM1 -

Pivot spacer set.Sold in a quantity of 2. Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47517-58

Pivot bolt is 8". Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47510-58 UOM1 -

Self-tapping raw swingarm pivot bolt is .025" oversize. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA

Swingarm bushing set includes two of each: mount bushing rubbers, tolerance rings and retaining rings.Sold as a 6 piece set. Fits:FLT 1980-2001FXR 1983-1994Additional Information

Polished 4-speed kick starter cover is cable operated clutch release mechanism with 3-ball internal ramp design.For use on kick starter or electric start models. Designed by Rodan Cycle of...

Rotary to ratchet top conversion kit includes a complete ratchet top, Andrews shifter fork kit and 1/4" x 20 Thread screw kit, with Vent screw. This is a complete assembly.Ratchet top conversion...

Dress up kit comes with polished parts and hardware for installation. Kits require the removal of the engine to install the rocker box covers.Kit is for Shovelhead 4-speed chain drive kick and...

Chrome dress up kit comes with chrome parts and hardware for installation.This kit is for Shivelhead 4-speed belt drive models with kick or electric start. Kit includes chrome rocker box cover set,...

Dress up kit comes with chrome parts and hardware for installation.Kit is for Shovelhead 4-speed chain drive kick and electric start models. This kit includes chrome rocker box cover set, rocker box...

Polished 5-speed outer primary cover.Starter shaft hole has a .98" inner diameter. *NOTE: Must order gaskets, starter bearing and screw kit separately. ...

Finned kick starter cover with cast finish, bushings and seal installedOrder kick start spring stud separately. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

This natural with polished highlights is just what you need if you are tired of the chrome look. This inner primary cover has 9 holes and will accept either 8 or 9 hole outer cover.Cover does not...

Chrome outer primary derby cover features engraved early syle bird logo.Order gasket and screws separately. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXR 1985-1994FXD 1991-1998FLST...

Coil cover is teardrop style with chrome finish. Fits:FXST 1984-1999FLST 1986-1999FL 1965-1984FX 1971-1984Additional Information UOM

3 hole derby cover features a chrome finish with a gold inlay Eagle Spirit design.Order gaskets and screws separately. Screws not included. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXR...

Chrome light visor set.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM No.67786-86T

Chrome billet raised iron cross primary derby cover with 3 holes.Order gasket and screws separately. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXR 1985-1994FXD 1991-1998FLST...

Bone head skull coil cover. Fits:FXST 1984-1999FLST 1986-1999FL 1965-1984FX 1971-1984Additional Information UOM1 - EA

Engine skid plate features narrow width ribs as exact original for 1936-39. The correct shape! Fits:FL 1941-1999FX 1970-1999EL 1936-1952Additional Information

V-Twin - 42-2025 - 3-Hole Derby Cover ChromeDescriptionChrome steel with black mesh 3 hole outer primary derby cover.*NOTE: It's closed behind the mesh. Fits:FL 1970-1984FXR 1984-1984FX 1971-1984FXST...

V-Twin - 42-1970 - Shovelhead Ignition System CoverDescriptionSilver patina Shovelhead ignition system cover with horizontal mount holes. Fits:FL 1970-1984Additional Information

Finned derby cover features a powder coated polished finish.Order gasket and screws separately. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXR 1985-1994FXD 1991-1998FLST...

Description Finned derby cover features a powder coated chrome finish.Order gasket and screws separately. Fits: FL 1970-1984 FXST 1984-1998 FLT 1979-1998 FX 1971-1984 FXR 1985-1994 FXD...

Horn cover with a black finish for high note horns. Fits:FL 1976-1984FLT 1984-1990FXST 1984-1990XL 1965-1978FX 1976-1984Additional Information