Tour Glide FLT

Rear VL Spring Fork leg features a black finish with a 1" stem.The inner distance between the rocker mount holes is 8". *NOTE: Fork leg will accept spring fork rod bushings for spring alignment...

Black heavy duty construction is 15% thicker than stock for added support to prevent breakage.Mounts with stock hardware. ...

V-Twin - 49-1320 - 1936 Knucklehead Side Car Mount KitDescription1936 Knucklehead side car mount kit includes chrome cross bar and right and left cast mount. Can be welded to most frames.Mount loops...

Side car front upper clamp kit for clamping to front frame tubes on 1936-99 models features a black oxide finish.*NOTE: Some Components may be "NOS. New Old Stock" with some scratches and...

Center kickstand kit features natural finish aluminum construction, with bushings and bolts.Includes all hardware for installation. Fits:FX 1971-1984FL 1958-1984Additional Information

Chrome heavy duty construction is 15% thicker than stock steel brackets for added support to prevent breakage. Constructed of forged aluminum, machined, and full chrome plated pieces.Mounts with...

Chrome heavy duty construction is reinforced and 15% thicker than stock for added support to prevent breakage.Mounts with reinforced stock hardware. Fits:FLT 1979-2013Additional Information

Seat post collar set for heavy duty seat post spring kits Fits:EL 1936-1940FL 1941-1984Additional Information UOM1 - SET

Zinc seat T clevis pin with spring clip Fits:UL 1937-1948EL 1936-1940FL 1941-1984WL 1929-1952Additional Information UOM1 - KIT

Special shoulder to mount stock type T bar features a black oxide finish. Fits:UL 1937-1948WL 1936-1952EL 1936-1940FL 1941-1984Additional Information

Zinc windshield bracket set allows installation of 1949-1959 type windshields on 1960-1984 FL models. Fits:FL 1960-1984Additional Information OEM No.5809

Chrome foot clutch rod lever. Fits:FL 1965-1984Additional Information OEM No.36816-65A UOM1 - EA

Black windshield pouch, with silver edge trim.Mounts to stock 1949-1984 windshields. Fits:FL 1949-1984Additional Information UOM1 - EA <

White windshield pouch, with silver edge trim. Fits:FL 1960-1984Additional Information OEM No.58275-63 UOM

Black windshield pouch, with gold edge trim. Fits:FL 1960-1984Additional Information UOM1 - EA Manufacturer

White windshield pouch, with gold edge trim. Fits:FL 1960-1984Additional Information OEM No.58275-63 UOM<

Black dash panel decals have an adhesive back. Fits:FXDWG 1991-1993FXST 1984-1993FLST 1986-1993FL 1979-1984FX 1980-1986Additional Information

V-Twin - White Leather Solo Seat with Skirt fits '41-'84 FL, '36-'40 EL Models White deluxe solo seat features white skirt, black rosettes and nickel spots. A molded foam pad on an accurate steel...

Black naugahyde covered buddy seat with features a thin profile with a formed steel baseplate.Fastened by pop rivets. Use with a seat tee. Skirt rail not included. *NOTE: Must order mount hardware...

Bates style solo seat kit includes a genuine Bates style tuck and roll leather solo seat and all mount hardware for installation on 1965-1984 FX-FL 4 speed models with a swingarm frame.*Note: UPS may...

Black front and rear hub assembly includes all internals for 3/4" axles.Where the spokes go in is 4-1/2" wide, the center width is 2", the ends are 4" wide, and end to end is 6-5/8" long. *NOTE: Must...

16" chrome front wire wheel cover set includes 1 cover with a hex hole and the other chrome cover with a 4.1" round hole. Set is for pentagon shaped hub flange wheels. For single disc brake wire...

16" chrome rear wheel cover set fits between disc rotor and sprocket, for 1973-1984 FLH spoke wheel models.Set is fastened with 5 bolts. Wheel cover will fit rims/wheels with Side Valve tube type...

40 spoke extra wide offset dual flage rear hub features a chrome finish. The drive side is offset 0.875" further out than standard 1973-1985 style hubs. Includes 3/4" bearings, races, seals and seal...

Chrome wheel hub is constructed of steel and includes 3/4" bearings, races, seals, and seal spacers.This hub has 3/8" and 7/16" disc mount holes. The width of the hub through the axle measures 7"...

Steel rear hub without internals. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - EA Locat

This standard nipple set is 22mm long and is cadmium plated.Set of 40 pieces. Fits:FL 1941-1984Additional Information UOM1 - SET

V-Twin - 44-2060 - Swingarm KitDescriptionKit includes 2 offset steel bushings and 2 alloy washers. Fits:FLT 1980-2006FL 1980-2006FLHTC 1980-2006Additional Information

V-Twin - 44-2051 - Rear Axle Spacer 3/4 inch Inner DiameterDescriptionZinc rear axle spacer smooth style has an overall length of 15/16". Fits:FL 1973-1982 Cast and Wire WheelFXST 1984-1986FX...

V-Twin - 44-2044 - Swingarm Rebuild KitDescriptionKit includes two bushing assemblies, spacers, plastic retainer rings, plastic dust covers, rubber isolators, and one pivot shaft with lock nut and...

V-Twin - 44-2039 - Swingarm Retaining Ring PlasticDescriptionPlastic swingarm retaining ring. Fits:FXR 1987-1994FLT 1980-2001Additional Information

V-Twin - 44-2034 - Wheel Hub Bearing Tube Spacer 4.448 inch Overall LengthDescriptionFront or rear wheel hub bearing tube white spacer. This spacer measures 4.448" overall length for use on cast...

V-Twin - 44-2033 - Wheel Hub Bearing Tube Spacer 4.434 inch Overall LengthDescriptionFront or rear wheel hub bearing tube yellow spacer. This spacer measures 4.434" overall length for use on cast...

V-Twin - 44-2032 - Wheel Hub Bearing Tube Spacer 4.420 inch Overall LengthDescriptionFront or rear wheel hub bearing tube red spacer. This spacer measures 4.420" overall length for use on cast wheels...

V-Twin - 44-2029 - Wheel Hub Bearing Shim .008 ThickDescriptionWheel hub bearing shim is .008 thick. Fits:FLT 1982-1999Additional Information

V-Twin - 44-2027 - Front Wheel Hub Bearing Shim .032 ThickDescriptionWheel hub bearing shim is .032 thick. Fits:FXR 1982-1994FLT 1979-1999Additional Information

V-Twin - 44-2026 - Wheel Hub Bearing Tube SpacerDescriptionWheel hub bearing tube spacer. Fits:FLT 1982-1999Additional Information

V-Twin - 44-2009 - Chrome Rear Axle Adjuster End Plate SetDescriptionChrome rear axle adjuster end plate set.Sold as a pair Fits:XL 1979-UPFX 1973-1984FL 1973-1984Additional Information

V-Twin - 44-1996 - Swingarm Pivot Pin with 1 inch Longer PinDescriptionSwingarm pivot pin is 1" longer.Order nut separately. Use with a 5/8" X 18 threads per inch nut. Fits:FX 1971-1984FL...

V-Twin - 44-1984 - Swingarm Pivot ShaftDescriptionSwingarm pivot shaft only measures 12" x 5/8". Fits:FXR 1982-1988FLT 1982-1988Additional Information <