Electra Glide Sport FLHS

V-Twin - Tuck and Roll Frame Mount Solo Seat Set fits '71-'84 FX, '58-'84 FL Models Frame mount vinyl tuck and roll style solo seat set is black naugahyde on a steel base plate for direct frame...

V-Twin - AEE Shock Set with Covered Springs fits '73-'84 FX '73-'84 FL Models (OEM #54500-73A) AEE chrome 12" shock set comes with full covered springs. The inner diameter of the top eyelet is .512"...

V-Twin - Chrome 2 into 1 Exhaust Header Set fits '70-'84 FL, '71-'84 FX Models Chrome 2 into 1 exhaust header pipe set is for use with forward controls only. Set includes 12mm oxygen sensor bung. The...

Shovelhead shotgun exhaust straight pipes are for FX-FL model engines and features a chrome finish. *Note: For nose cone or flat side Shovelhead applications with forward brake controls. May not fit...

V-Twin - Tourist Trophy Gas Tank Set - fits '36-'52 EL, '41-'84 FL, '70-'84 FX Models Tourist Trophy gas tank set features a 2.8 gallon capacity without the dash cutout constructed of steel in a raw...

V-Twin - 24 Tooth Compensator Sprocket Kit fits '70-'84 FL, '71-'84 FX Model Kit Includes: 24 tooth sprocket, retainer and cover assembly, a raw compensator sprocket cup, motor sprocket nut , a...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers,...

V-Twin - Chrome 48" Handlebar Switch Kit fits Big Twin Models Handlebar switch kit includes complete right and left switch assemblies, brake light switch, mounting screws, and clips. Switch kit...

Colony - Headlamp/Cowl Screws Set fits '60-'84 FL Model, '60-'73 Servi-Car Features: Duplicate of screws 2661W and 2662W Fitment: 1960

Colony - Universal Line Fitting fits '52-'99 Big Twin & '57-'85 Sportster Models (OEM #63578-52) Features: OEM replacement restoration For use with 5/16" hose

Colony - 9644-2 Chrome OEM-Style Oil Pump Plug fits '84-'99 Evolution Big Twin Models (OEM #26263-80) Features: Made in the U.S.A. Fitment<

Drag Specialties - Spark Plug fits '75-'84 Shovelhead (Hot), '84-'99 Evolution Big Twin Models Hot Spark Plugs: Designed for: Optimal performance in engines that operate mostly under low to...

Drag Specialties - Spark Plug fits '75-'84 Shovelhead (Cold), '84-'99 Evolution Big Twin Models This spark plug features a copper core electrode, which prevents oxidation and corrosion, provides...

Hard Drive - Stainless Steel Aircraft Style Intake Clamp Set fits Late '78-'85 Shovelhead & XL Models Hard Drive's Intake Clamp Sets act as OEM replacements and are sold in pairs. The O-Rings and/or...

Arlen Ness - Speedliner Cable Grips fits 1" Handlebars Arlen Ness' Speedliner grips have a cool and comfortable oversized 3D knurled rubber design with dual integrated channels for more grip than...

Arlen Ness - Diamond Cable Grips fits 1" Handlebars These diamond-design rubber grips feature integrated knurling inside each diamond-shaped pocket for a vintage look with outstanding hand traction...

Hard Drive - Shovelhead Exhaust Stud Conversion Kit fits '66-'84 Shovelhead Model Features This kit helps prevent thread stripping in the cylinder head by using permanently installed studs. Kit:...

Drag Specialties - High Performance AGM Battery - OEM# 66007-84 fits '65-'84 Touring Replaces OEM#66007-84. Note: Not spill proof design, acid not included. Features Specifically designed for...

Arlen Ness - Air Trax Grips for Cable Application The Air Trax Grips have a tough yet comfortable rubber design which provides perfect hand traction and reduced vibration. These grips are available...

Drag Specialties - Fork Slider Covers - Fits Harley-Davidson '49-'13 FL Touring, '86-'17 FLST Softail Models These fork boots by Drag Specialties fit Harley-Davidson 99-13 FLT/FLHT Models, 00-17...

V-Twin Mfg. Rear Master Cylinder Cover with Natural Finish Fits Harley-Davidson 82-86 FXR, 83-84 FLH Models This rear master cylinder has 3 fittings with 1/8" NPT. Two for brake lines and one for...

Klock Werks - Hugger Series Front Fender Mounting Blocks Features: Use with Klock Werks' Hugger Series front fenders, or they can also be used for a variety of custom applications Machined from...

Arlen Ness - Knurled Fusion Dual Cable Grips - fits 1" Bars The Arlen Ness Knurled Fusion Grips are designed to give your hands maximum traction. Not only are these functional but they have a super...

HardDrive Master Cylinder Cover - fits '82-'95 HD Models Features: Chrome Fitment: 1995 - FXDS-Conv Dyna Convertible 1995 - FLHTCU Electra Glide Ultra Classic 1995 - FLSTC Heritage Softail...

VT No: 35-0758 Brass hex petcock has inward spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut. On/Off handle is chrome. Fits:FL...

The Colony Rocker Shaft End Plug and Cap Kit: Meets or exceeds OEM specifications Made in the USA Chrome plated allen style Fitment: '71-Up Shovelhead and '71-'85 XL Models

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '70-'98 Big Twin Models

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '70-'92 FL, FLH, FLT, FXR, Softail

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '70-'92 FLT, FXR, Softail

The HardDrive Shovel Rocker Arms: Fits '66-'84 Big Twin Models Rocker arms include bushings

The HardDrive Shovel Rocker Arms: Fits '66-'84 Big Twin Models Rocker arms include bushings

Cylinder head engine brace mount. Fits: FL 1966-1984 FX 1971-1984

Upper and lower allen motor mount kit Fits: FL 1970-1984 FX 1971-1984

Colony - Rocker Arm Shaft Acorn Nut and Washer Kit - fits Harley FL, FX, and XL ( see desc.) Rocker arm shaft chrome acorn nut and washer kit. Fits: FL 1966-1984 FX 1971-1984 FLT...

Colony - 8401-8 Rocker Shaft Cadmium End Cap Type Nuts with Washers fits '79-'83 FLT, '71-'84 FX, '82-'83 FXR Models Rocker arm shaft end nut kit contains 4 cap nuts and washers with cadmium...

Rocker shaft end caps, chrome finish. Fits: FL 1971-1984 FX 1971-1984 FLT 1979-1983 FXR 1982-1983 XL 1971-1985

The chrome rocker arm shaft end plug makes installation and removal a much easier job than with the original slotted part. Includes 4 plugs per set. Fits: FL 1971-1984 FX 1971-1984 FLT...

Acorn tappet base screw Screw does not have taper and fits 1976-up style lifter blocks only. Fits:FL 1976-1984FX 1976-1984FLT 1979-1998FXR 1982-1994FLST 1986-1998FXD 1991-1998

Black round mesh air cleaner includes element and is 5.5" for Bendix-Keihin carburetors. Fits:FL 1972-1984FX 1972-1984FXST 1984-1989XL 1972-1987FXR 1982-1989FLT 1979-1989

VT No: 35-0759 Brass hex petcock has 90° left hand spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut. On/Off handle is chrome. ...