Sportster XLX 1000

Fat kid style fork assembly include chrome top tree, black lower triple tree with polished sliders and axle kit. Fits:XL 1982-2003Additional Information UOM<

Nylon ring for fork tube damper. Fits:FX 1975-1984XL 1975-1984Additional Information OEM No.45412-75

V-Twin - 24-0624 - Dust Shield Lower ChromeDescriptionChrome lower dust shield. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR 1982-1984FXR 1985-1994FLST 1986-UPXL 1982-2003FLT 1979-UP<

V-Twin - 24-0618 - Upper Triple Tree Dust Shield ChromeDescriptionUpper triple tree dust shield features a chrome finish. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR 1982-1984FXR...

Front dual disc caliper mount bushing set comes in a set of 4. Fits:XL 1978-1983FX 1980-1983FX 1978-1983Additional Information OEM No.4

Chrome bolt set for front brake caliper comes in a set of 4. Fits:XL 1978-1983FX 1980-1983FX 1978-1983Additional Information OEM No.441

Chrome 35mm fork slider set is for dual disc.Sold as a pair. Fits:XL 1977-1983FX 1977-1983Additional Information UOM1 - SET

Narrow Glide fork slider axle cap is for the right side. Cap is alloy material with natural finish and fits models with 35 and 39mm fork tubes. Fits:FX 1978-1983XL 1975-1983Additional Information

Narrow Glide fork slider axle cap for the left side. Cap is alloy material with natural finish and fits models with 35 and 39mm fork tubes. Fits:FX 1975-1983XL 1975-1983Additional Information

Showa kit includes damper tubes with rings, screws, washers, lower stops, slider seal washers, and retaining rings for both sides. Fits:FX 1976-1983XL 1976-1983Additional Information

Fork tube set has stock length of 23-1/4".Before installing, compare new and old tubes. Be sure the stock top plugs fit into the new fork tubes. Sold as a pair. ...

Chrome 35mm forged aluminum fork brace adds rigidity to forks by clamping to fork seal of lower legs.Bushings are not required for installation Fits:FX 1975-1984FXR 1982-1984XL 1975-1986Additional...

Fork springs feature high quality and high performance.Springs elminate front end sag, reduce nose dive under braking, improve cornering stability, increase ride comfort and allow forks to utilize...

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Fork damper tube only comes in pairs.Sold as a pair. Fits:FX 1975-1983XL 1975-1983Additional Information OEM No.45409-75

Fork lower tube stop is sold in pairs.Sold as a pair. Fits:FX 1975-1983FXR 1982-1983XL 1975-1983Additional Information OEM No.454

Zinc lower fork seal ring is 35mm.Sold as a pair. Fits:FX 1982-1983XL 1980-1983Additional Information OEM No.45911-80

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Rear caliper assembly features a black finish. Girling type caliper for left side mounting on Sportster models.Brake line enters forward hole and rear hole is for breather fitting. Kit includes...

Vibration shim for rear brake pad.Sold as a pair. Fits:FX 1982-1984FL 1982-1984XL 1982-1986FXR 1984-1986Additional Information OE

Brake pedal plunger with a zinc finish. Fits:FXR 1982-1986XL 1982-1986Additional Information OEM No.42448-82A

Rear brake pedal plunger end only. Fits:XL 1980-1986Additional Information OEM No.42445-80A UOM1 - EA

Rear brake pedal pivot stud with a zinc finish. Fits:XL 1980-1990Additional Information OEM No.42441-80 UOM

Black brake caliper includes body, piston and seals for dual disc.For use with 3/8" bore master cylinder and 10" brake disc. Mounting hardware is available separately. Fits:FXR 1982-1983XL...

Brake pedal kit features a polished finish.Kit includes a long brake clevis pin zinc plated, brake pedal pivot shaft, brake pedal cylinder plunger, polished brake pedal with busing and a hex jam nut...

Replace your stock worn brake pedal with our V-Twin brake pedal. This pedal has a polished finish and includes the brass bushing. The pedal replaces the mid shift brake lever on stock applications...

Zinc Support Bracket for rear master cylinder. Fits:XL 1983-1990 Right sideAdditional Information UOM1 - EA Ma

V-Twin - 23-1758 - Brake Pedal Spring WasherDescriptionBrake pedal spring washer.Sold in a quantity of 2. Fits:FX 1983-1986FXST 1984-1986XL 1982-UPAdditional Information

Brake pedal rod end and plunger assembly with a zinc finish. Fits:XL 1980-1987 1980-Early 1987Additional Information OEM No.42448-80

Front brake pad pins for dual disc calipers. Fits:XL 1977-1983FX 1977-1983Additional Information OEM No.44162-77

Kit includes 2 black calipers with brake pads and 2 zinc steel drilled discs for dual disc applications.Hardware included. *NOTE: Kit does not include anti-rattle tape or replacement bushings...

Chrome line runs from the master cylinder to the brake tee. Fits:XL 1981-1985Additional Information UOM1 - EA

Zinc steel line runs from the master cylinder to the brake tee. Fits:XL 1981-1985Additional Information OEM No.42484-81

Includes chrome pedal, cover, plunger and mount hardware. Fits:XL 1982-2003Additional Information UOM1 - KIT F

Replace your stock worn brake pedal with our V-Twin brake pedal. This pedal has a chrome finish and includes the brass bushing. The pedal replaces the mid shift brake lever on stock applications...

Kit includes two chrome calipers with brake pads and two stainless steel drilled discs. Fits:FXWG 1980-1983XL 1978-1983FX 1978-1983Additional Information

Kit includes 2 chrome calipers with brake pads and 2 zinc steel drilled discs. Fits:XL 1978-1983FX 1980-1983Additional Information UOM1 - KIT

Mid control kit includes polished brake pedal, rear master cylinder, rear master cylinder support bracket, brake pedal pivot stud, sprocket cover/footpeg mount stud, crhome shifter lever and a black...