Super Glide Low Rider FXRS

Rear axle adjuster has a 3/4 inch inner diameter and includes heavy pull blocks and two 1/4 inch-20 x 2 inch full thread allen cap screws. Fitment: FXR 1982-1994

WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR inner shift washer and seal kit is for the 1/2 inch diameter inner shift shafts. Sold as a 6 piece kit. Fitment: FXR 1982-1984

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

Zinc plated FXR pedal rod end 4 piece kit includes the rod end zinc clevis pin zinc 5/16 inch x 24 thread nut and a cotter pin. *NOTE: Measures 2-3/8 inch from the hole to the end of the thread...

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

2023 New Production black kickstand is stock length and includes pin for FXR models. Fitment: FXR 1982-1990

FXR frame side cover set is constructed of black ABS plastic with vented panels. Sold as a pair. Requires (4) 1/4 inch-20 x 1-3/4 inch allen bolts and (4) 1/4 inch flat washers. Tech Notes: Required...

This replaces the original plastic unit on the 1982-up models. Thread is 3/8 inch x 28 TPI. Holes on the back measure starting with the small one closest to the bottom and working to up: #8-32* 5/16...

James Gaskets - JGI-65834-68-A2 - Copper Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Copper Exhaust Port Gasket from...

James Gaskets - 65834-68-SC2 - Steel Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Steel Exhaust Port Gasket from...

James Gaskets - 65834-68-STD - 3 Bolt Standard Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. 3 Bolt Standard Exhaust...

James Gaskets - 65834-68-X-2 - Fire Ring Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Fire Ring Exhaust Port Gasket...

James Gaskets - JGI-65834-98-X2 - Knitted Wire Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Knitted Wire Exhaust Port...

James Gaskets - JGI-16776-63-X1 - .020" Front/Rear Metal Base Gasket with Outside Oilers - Fits '66-'84 Big Twin Models - Pair Fits: '66-'84 Big Twin Models. Full year/model list is on the Fitment...

James Gaskets - JGI-16776-63-XF - .030" Foamet® Front/Rear Base Gasket - Fits '63-'84 Big Twin Models - Pair Fits: '63-'84 Big Twin Models. Full year/model list is on the Fitment tab. .030" Foamet®...

James Gaskets - JGI-18633-48-KF - Tappet Block Gasket - Fits '48-'99 Big Twin Models (.020” Foamet®) - Pair Fits: '48-'99 Big Twin Models (.020” Foamet®). Full year/model list is on the Fitment tab...

James Gaskets - JGI-17540-99-X - Silicone Rocker Cover Metal Gasket - Fits '66-'84 Shovelhead Model (.020”) - Pair Fits: '66-'84 Shovelhead Model (.020”). Full year/model list is on the Fitment tab...

James Gaskets - JGI-45400-75 - Fork Seal - Fits 'L75-'E84 FX/​FXR Sportster Models Fits: 'L75-'E84 FX/​FXR Sportster Models. Full year/model list is on the Fitment tab. Fork Seal from James Gaskets,...

James Gaskets - JGI-65781-82 - Crossover Exhaust Gasket - Fits '86-'03 Sportster Models - Pair Fits: '86-'03 Sportster Models. Full year/model list is on the Fitment tab. Crossover Exhaust Gasket...

James Gasket - Pushrod Seal Set fits '79-'81 Shovelhead Models (O-Ring) Features: Convenient and efficient way to sell the correct amount of seals or O-rings for a rebuild or cam change James...

James Gaskets - JGI-25225-70-XM - 0.036” Cam Cover Gasket - Fits '70-'92 Big Twin Models (Metal Core, Paper Facing w/ Silicone Fits: '70-'92 Big Twin Models (Metal Core, Paper Facing w/ Silicone...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM...

James Gaskets - JGI-11125-XMSF - Foamet® Crankcase Saver Kit Gasket - Fits '70-'84 Shovelhead Models Fits: '70-'84 Shovelhead Models. Full year/model list is on the Fitment tab. Foamet® Crankcase...

James Gasket - Intake/Carburetor Gasket Kit fits '66-'84 Shovelhead, '79-'85 Sportster Models w/ Bendix/Keihin/​Tillotson (Butterfly Style) Features: Kit contains carb-to-intake seal and two...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two...

James Gaskets - JGI-11125-XMS - Rubber Coated Metal Crank Case Saver Kit Gasket - Fits '70-'84 Shovelhead Models Fits: '70-'84 Shovelhead Models. Full year/model list is on the Fitment tab. Rubber...

James Gaskets - JGI-25416-70-DL - Clutch Cover Seal Kit - Fits '70-'98 Big Twin Models Fits: '70-'98 Big Twin Models. Full year/model list is on the Fitment tab. Clutch Cover Seal Kit from James...

James Gaskets - JGI-12014-K - Clutch Hub Nut Seal Kit - Fits '65-'E84 Big Twin Models Fits: '65-'E84 Big Twin Models. Full year/model list is on the Fitment tab. Clutch Hub Nut Seal Kit from James...

James Gaskets - JGI-27062-78-2 - Intake Manifold Seal Kit - Fits 'L78-'84 Big Twin Models Fits: 'L78-'84 Big Twin Models. Full year/model list is on the Fitment tab. Intake Manifold Seal Kit from...

James Gaskets - JGI-27002-66-SS - Carburetor-to-Intake Manifold Seal Kit - Fits S&S Big Twin Models Fits: S&S Big Twin Models. Full year/model list is on the Fitment tab. Carburetor-to-Intake...

James Gaskets - JGI-17034-66 - Top End Gasket Kit - Fits '66-'84 Shovelhead Models (.045” Head Gaskets / .030” Base Gaskets Fits: '66-'84 Shovelhead Models (.045” Head Gaskets / .030” Base Gaskets...

James Gaskets - JGI-25225-70-K - Cam Change Gasket Kit - Fits '70-'92 Big Twin Models Fits: '70-'92 Big Twin Models. Full year/model list is on the Fitment tab. Cam Change Gasket Kit from James...

James Gaskets - JGI-81-FL - Mylar® Gasket/Seal Kit - Fits '84-'91 Evolution Big Twin & '81-'84 Shovelhead Models Fits: '84-'91 Evolution Big Twin & '81-'84 Shovelhead Models. Full year/model list is...

James Gaskets - JGI-37741-82-K - 4-Speed Transmission Seal Kit - Fits '82-'84 FL/​FLH Models (Double-Lip Main Seal) Fits: '82-'84 FL/​FLH Models (Double-Lip Main Seal). Full year/model list is on the...

James Gaskets - JGI-34901-79-K - Primary Gasket Kit - Fits '80-'83 FLT & FXR Models (Gaskets and O-Rings) (.062” Outer Cover Gasket) Fits: '80-'83 FLT & FXR Models (Gaskets and O-Rings) (.062” Outer...

James Gaskets - JGI-17034-66-X - Top End Gasket Kit - Fits '66-'84 Shovelhead Models (Fire-Ring™ Head Gaskets Fits: '66-'84 Shovelhead Models (Fire-Ring™ Head Gaskets. Full year/model list is on the...

James Gaskets - JGI-17034-78-S - 3-5/8" Big Bore Top End Gasket Kit - Fits '78-'84 Shovelhead Models (Steel Base Gaskets) Fits: '78-'84 Shovelhead Models (Steel Base Gaskets). Full year/model list is...

James Gaskets - JGI-SE-1 - Fire-Ring™ Exhaust Gasket Kit - Fits '66-'84 Shovelhead Models Fits: '66-'84 Shovelhead Models. Full year/model list is on the Fitment tab. Fire-Ring™ Exhaust Gasket Kit...