1983

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Polished lower fork sliders are single disc. This fork slider set is for use with 1977-1984 FL type internals and fork tubes.. Fits:FL 1972-1984Additional Information

Chrome triple tree lower without lock tab features a 3  rake built in. Fits:FXST 1984-1999FXWG 1980-1986Additional Information UOM1 - EA

Fork tube set is 6" over stock with a total length of 26-7/8".Set of two. Before installing, compare old and new tubes. Be sure the stock top plug threads into the new tubes. Stock length is 20-7/8"...

Fork tubes are 24-7/8" and are stock length for FXWG, FXD models. Tubes are 4" over stock for FL models. Stock length for FL models is 20-7/8".Before installing, compare old and new tubes. Be sure...

Fork tubes are 20-7/8" stock total length.Before installing, compare old and new tubes. Be sure the stock top plug threads into the new fork tubes. Sold as a pair. *NOTE:...

V-Twin - 24-0011 - Fork Drain ScrewsDescriptionFork drain screws are supplied with washers and are sold in pairs. Fits:FL 1976-1984FLST 1986-2005FLT 1979-UPFXST 1984-2005Additional Information

Accepts 41mm fork tubes. Fits:FXWG 1980-1986FXST 1984-1988Additional Information OEM No.45672-80 UOM<

Black 41mm adjustable triple tree kit includes fork plugs, lower adjustable tree and top tree with pivot bolts. Kit features 2 adjustable positions with a 12" rake in the raked position.Lower triple...

Chrome top triple tree accepts 41mm fork tubes. Fits:FL 1973-1984Additional Information OEM No.56121-73 UOM

Set accepts 41mm fork tubes. Bottom tree features built in rake and rounded edges. Fork lock tab is welded to the lower tree.Spacing of the fork legs is 10" center to center. Fits:FXST 1984-1987FX...

Dura polished brake disc features a rustless finish and long service life. Compatible with all brake pads including sintered metal and OEM.Disc has a center hole inner diameter of 2". For use on...

Rear caliper assembly features a black finish. Girling type caliper for left side mounting on Sportster models.Brake line enters forward hole and rear hole is for breather fitting. Kit includes...

Polished Kelsey type master cylinder complete with internals with 3/4" bore.The bolt hole distance center-to-center measures 2-1/4". Requires use of a 10mm banjo bolt, the brake line must be updated...

Kelsey type chrome master cylinder assembly with 3/4" bore.The bolt hole distance center-to-center measures 2-1/4". Requires use of a 10mm banjo bolt, the brake line must be updated to banjo bolt...

Vibration shim for rear brake pad.Sold as a pair. Fits:FX 1982-1984FL 1982-1984XL 1982-1986FXR 1984-1986Additional Information OE

Chrome brake pedal. Fits:FL 1979-1984Additional Information OEM No.42402-79 UOM1 - EA

Polished Kelsey type master cylinder complete with internals with 3/4" bore.The distance between the mounting holes is 2-1/4" center to center. ...

Rear caliper anti-vibration clip helps dampen rattling pads. Fits:FL 1981-1983 Front or RearFX 1981-1983 Rear onlyAdditional Information OEM No.

V-Twin - 23-9173 - Brake Rod Plunger EndDescriptionZinc brake rod plunger end. Fits:FXR 1987-1994 Late 1987XL 1987-UPFXR 1982-1987 Early 1982Additional Information

Front section of brake line with zinc finish fits between the junction toward the rear caliper.Order rubber hose for final connection to the rear wheel cylinder or caliper assembly. ...

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

Chrome caliper rear anchor arm. Fits:FX 1983-1984FL 1983-1984Additional Information OEM No.41039-82 U

Brake pedal plunger with a zinc finish. Fits:FXR 1982-1986XL 1982-1986Additional Information OEM No.42448-82A

Rear brake pedal plunger end only. Fits:XL 1980-1986Additional Information OEM No.42445-80A UOM1 - EA

Rear brake pedal pivot stud with a zinc finish. Fits:XL 1980-1990Additional Information OEM No.42441-80 UOM

Kelsey Hayes type billet master cylinder has 5/8" bore with inline mount holes.This master cylinder is 3-1/8" tall and is to be used with 10mm banjo bolt. Fits:FXS 1979-1984FX 1980-1983FL...

Black brake caliper includes body, piston and seals for dual disc.For use with 3/8" bore master cylinder and 10" brake disc. Mounting hardware is available separately. Fits:FXR 1982-1983XL...

Alloy rear master cylinder is designed to have 3 fittings with 1/8" NPT. Two for brake lines and one for stop light switch.*NOTE: Made by vibration grinded. Fits:FXWG 1983-1984FXST 1984-1986FXSB...

V-Twin - 23-2009 - Rear Master Cylinder Reservoir Body ChromeDescriptionRear master cylinder reservoir body is for use with slave cylinders. Fits:FXST 1984-1986FL 1983-1984 Late 1984Additional...

V-Twin - 23-1996 - Rear Master Cylinder Reservoir Fitting SetDescriptionReservoir fitting for use on a rear master cylinder.Sold in a set of two. Fits:FXR 1982-1985FLT 1982-1985FX 1982-1985Additional...

Rear caliper assembly features a black finish. Girling Big Twin caliper for right side mounting. Includes bleeder screw, piston and seal kit, pad spring and pad set.Brake line enters hole forward on...

Brake pedal kit features a polished finish.Kit includes a long brake clevis pin zinc plated, brake pedal pivot shaft, brake pedal cylinder plunger, polished brake pedal with busing and a hex jam nut...

Replace your stock worn brake pedal with our V-Twin brake pedal. This pedal has a polished finish and includes the brass bushing. The pedal replaces the mid shift brake lever on stock applications...

Zinc Support Bracket for rear master cylinder. Fits:XL 1983-1990 Right sideAdditional Information UOM1 - EA Ma

Kelsey type alloy master cylinder. Fits:FLH 1979-1984Additional Information OEM No.41754-79A UOM1 - E

V-Twin - 23-1758 - Brake Pedal Spring WasherDescriptionBrake pedal spring washer.Sold in a quantity of 2. Fits:FX 1983-1986FXST 1984-1986XL 1982-UPAdditional Information

Brake pedal rod end and plunger assembly with a zinc finish. Fits:XL 1980-1987 1980-Early 1987Additional Information OEM No.42448-80

Front brake pad pins for dual disc calipers. Fits:XL 1977-1983FX 1977-1983Additional Information OEM No.44162-77

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA