Sportster XLX 1000

Rear caliper assembly features a black finish. Girling type caliper for left side mounting on Sportster models.Brake line enters forward hole and rear hole is for breather fitting. Kit includes...

Vibration shim for rear brake pad.Sold as a pair. Fits:FX 1982-1984FL 1982-1984XL 1982-1986FXR 1984-1986Additional Information OE

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

Brake pedal plunger with a zinc finish. Fits:FXR 1982-1986XL 1982-1986Additional Information OEM No.42448-82A

Rear brake pedal plunger end only. Fits:XL 1980-1986Additional Information OEM No.42445-80A UOM1 - EA

Rear brake pedal pivot stud with a zinc finish. Fits:XL 1980-1990Additional Information OEM No.42441-80 UOM

Brake pedal kit features a polished finish.Kit includes a long brake clevis pin zinc plated, brake pedal pivot shaft, brake pedal cylinder plunger, polished brake pedal with busing and a hex jam nut...

Replace your stock worn brake pedal with our V-Twin brake pedal. This pedal has a polished finish and includes the brass bushing. The pedal replaces the mid shift brake lever on stock applications...

Zinc Support Bracket for rear master cylinder. Fits:XL 1983-1990 Right sideAdditional Information UOM1 - EA Ma

V-Twin - 23-1758 - Brake Pedal Spring WasherDescriptionBrake pedal spring washer.Sold in a quantity of 2. Fits:FX 1983-1986FXST 1984-1986XL 1982-UPAdditional Information

Brake pedal rod end and plunger assembly with a zinc finish. Fits:XL 1980-1987 1980-Early 1987Additional Information OEM No.42448-80

Caliper adapter features billet alloy construction, comes with bolts and features a polished finish.*NOTE: Converts 3-1/2" on center to 2-3/4" on center, to adapt 2000-up calipers to 1984-1999 model...

Polished stainless steel 11-1/2" front brake disc is a 5-spoke style.This disc accepts the center ring and washers. Fits: FXST 1984-1999 FXD 1991-1999 FLST 1986-1999 XL 1984-1999 FXR 1984-1994 ...

Bolt kit is for use with front or rear universal or stock lines with 12mm hole size. Bolt is 7/16-24 with a 6 point head. Fits:FXST 1984-2010XL 1984-2003FXD 1991-2010Additional Information

Chrome line runs from the master cylinder to the brake tee. Fits:XL 1981-1985Additional Information UOM1 - EA

Zinc steel line runs from the master cylinder to the brake tee. Fits:XL 1981-1985Additional Information OEM No.42484-81

Includes chrome pedal, cover, plunger and mount hardware. Fits:XL 1982-2003Additional Information UOM1 - KIT F

Includes a 4 piston chrome caliper, a polished stainless steel drilled 11.5" front disc, and the front disc allen screw kit.*Note: UPS may consider this part as packaged "oversize" for shipment, as...

Replace your stock worn brake pedal with our V-Twin brake pedal. This pedal has a chrome finish and includes the brass bushing. The pedal replaces the mid shift brake lever on stock applications...

Chrome billet front brake caliper with bracket for left side.Caliper is for 11-1/2" rotors. For use with 39mm and 41mm forks. Fits:FXST 1984-1999FXD 1991-1999FLST 1986-1999XL 1984-1999Additional...

Chrome front left and right caliper Set. Fits:FXST 1984-1999FLT 1984-1999FXD 1991-1999FLST 1986-1999XL 1984-1999FXSTS 1988-1999FXR 1984-1994Additional Information

Polished stainless steel front disc set with a 5 spoke design.Accepts the washers only for front application. Fits: FXST 1984-1999 FLST 1986-1999 FXD 1991-1994 XL 1984-1999 FXR 1984-1994 ...

Kit includes 5/8" bore master cylinder, clutch handle with clamps, and two pair of switch housings. Fits:XL 1984-1995FXST 1984-1995FLST 1986-1995FXD 1991-1995FXR 1984-1994Additional Information

Mid control kit includes polished brake pedal, rear master cylinder, rear master cylinder support bracket, brake pedal pivot stud, sprocket cover/footpeg mount stud, crhome shifter lever and a black...

Kit includes a polished 11.5" disc, a chrome replica 4 piston caliper with integral bracket and weld on frame tab for the left side.For use on a rigid frame with a 3/4" axle. Fits:XL...

Kit includes a chrome Replica 4 piston caliper assembly, brake pads, a polished stainless steel drilled disc with chrome mount bolts, and a zinc adapter plate. Fits:XL 1982-1986Additional Information

V-Twin - 21-1892 - Mid Control Shifter Shaft Extension KitDescriptionMid control shifter shaft extension kit includes extension, washer, and screw. Fits:FXST 1989-UPFLST 1989-UPXL 1981-UPAdditional...

Chrome splined shifter lever with cats paw shifter footpeg. Fits:XL 1977-1985Additional Information UOM1 - EA

Chrome shifter lever constructed of steel includes a 1/4" x 20" x 1" screw with lock washer. Fits:XL 1977-1985Additional Information OEM No.34606-75T

1-1/2" sprocket pulley spacer is machined with counterbore for positive alignment and features an alloy consturction.This is the 5 hole type to space rear sprocket or pulley for alignment. Fits:XL...

V-Twin - 19-0691 - Rear Sprocket Flat Black 48 ToothDescription5-Spoke rear flat sprocket with a black finish. Sprocket is 48 tooth. Fits:XL 1982-1999Custom applicationAdditional Information

This black two piece lock ring for mag wheels only, is designed to be used on all Big Twin and Sportster models with a 5 bolt pattern on the rear sprocket or pulley.Installation ensures a positive...

This chrome two piece lock ring for mag wheels only, is designed to be used on all Big Twin and Sportster models with a 5 bolt pattern on the rear sprocket or pulley.Installation ensures a positive...

48 tooth flat rear sprocket features a black finish.. Fits:XL 1982-1992Additional Information OEM No.41470-86

Primary Chain Shoe Carrier Fits:XL 1977-1990Additional Information OEM No.39973-86 UOM1 - EA

Primary Chain Adjuster Screw Fits:XL 1977-1990Additional Information OEM No.3250 UOM1 - EA

Clutch adjusting screw. Fits:XL 1971-1984Additional Information OEM No.38130-71 UOM1 - EA

Tamer clutch ramp assembly for easy lever pull. Replaces OEM inner and outer ramp assemblies and related components.40% easier clutch lever operation. Easy to install; no drilling or spacers needed...

4-speed transmission thrust .020" thinner washer for 1979- 1984 Big Twin. Fits:FX 1979-1984XL 1977-1990FL 1979-1984Additional Information UOM

Transmission countershaft 2nd gear thrust washer Fits:XL 1958-1990Additional Information OEM No.35841-58 UOM