Super Glide Electric Start FXE

Starter pinion gear bushing for electric starter gear and shaft. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA

York starter gear and shaft for use with FX-FL electric starter kit.*NOTE: Starter kit is filled with an OEM type starter, available from different companies. Fits:FL 1965-1984FX 1973-1984Additional...

Starter pinion gear screw. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA Manufacturer

Zinc plated electric starter adapter plate for cast inner primary covers on 4-speed models.Accepts york electric starter kits. Mounts to inner primary with 5/16" screw in front hole and 1/4" in rear...

V-Twin - 32-2051 - OE Long Reach Factory Spark PlugDescriptionOE long reach factory plug plug features copper coated electrodes for foul resistance. Fits:FXST 1984-1998FX 1975-1981FLT 1984-1998FXS...

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Battery cable is 6 gauge with 5/16" and 3/8" holes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to starter. Fits:FXE...

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

Zinc crash bar adapter bracket. Fits:FXST 1984-1999FX 1972-1984Additional Information UOM1 - EA Measu

V-Twin - 31-9915 - Chrome Spotlamp Bracket KitDescriptionBracket kit chrome mounts to lower pinch bolts for spotlamp. Fits:FXST 1984-UPFX 1980-1984Additional Information

Chrome saddlebag supports are designed to fit the contour of the fender struts and protect your bags from brake caliper and swingarm. Supports are 2 bolt type.Sold in a quantity of 2. Fits:FX...

Black seat bracket kit includes seat bracket, right and left bracket. Fits:FXE 1966-1984FLH 1958-1984FXR 1982-1983FX 1966-1984FL 1958-1984FX 1980-1984Additional Information

V-Twin - 31-4028 - Bates Headlamp Mounting Block ChromeDescriptionBates short mounting block for mounting headlamp. The threaded mount hole is 3/8"-24 for mounting to the triple tree. The hole for...

Chrome top maxi engine mount has a two piece and two bolt construction for secure fastening. Fits:FX 1971-1984FL 1948-1984Additional Information UOM

Rear seat bracket for FXE models. Fits:FX 1972-1984FXE 1972-1984Additional Information OEM No.52538-72

Engine bar support with zinc finish allows installation of mounting bracket on FX models. Fits:FX 1973-1984Additional Information OEM No.49032-74

Solo seat hardware kit includes nose bracket, chrome springs and rear brackets to mount small type solos.Includes a bracket and 2 thick spacers for the use on 1982-1985 FX models.The thick spacers...

Zinc front solo seat mount bracket bolts to frame holes above seat post tube. The seat nose bracket will swivel on this mount.This bracket will also mount to frames with a flat triangular plate at...

Chrome speedometer mount bracket with left side cut.Mounts plastic speedometer gauges. The distance center to center measures 2-3/8". Fits:FX 1974-1984XL 1974-1985Additional Information

Chrome bracket for tachometer. Fits:FX 1974-1984XL 1974-1985Additional Information OEM No.92116-74 UO

V-Twin - 31-3943 - License Plate Frame Bracket Kit ChromeDescriptionChrome fender mount 3-hole bracket kit includes a rubber anti-vibration block to cushion it against the fender. Also mounts to...

Carburetor support with a zinc finish is for use on OKO and S&S "E" carburetors.For Big Twin models, mounts to center case bolt and carburetor to manifold bolt. Fits:FLST 1985-1999FX 1971-1984FL...

Carburetor support bracket is natural aluminum and measures 5-5/8" center to center. Bracket is used for Shovelhead and EVO applications. Fits:FX 1973-1984FL 1966-1984Additional Information

Steel exhaust repair port is to be welded on broken or damaged heads. Pipe flange is steel and is to repair shovel pipe ends.Sold in a quantity of 2. Fits:FX 1971-1984FL 1966-1984Additional...

V-Twin - 31-2013 - Rear Seat Tab Stainless SteelDescriptionRear seat tab features a stainless steel finish.For use on tuck and roll seat by Corbin Gentry. Fits:FL 1965-1984FX 1971-1984Additional...

Heavy cast steel construction top motor mount is unbreakable featuring a chrome finish.Thread hole is 5/16" x 18 to mount coil or other accessories, and the distance measures 2" center to center. ...

Heavy cast steel construction top motor mount is unbreakable featuring a zinc plated finish.Thread hole is 5/16" x 18 to mount coil or other accessories, and the distance measures 2" center to center...

2023 New Prodcution coil mount bracket kit features a black finish. Kit includes bracket, reinforcement plate, bolt set and coil mount hardware.Order mount stud set seperately. Fits:FX 1971-1984FL...

Front oil tank mount features a black finish.Mount allows the oil tank to fit close to the top frame rails. Fits:FL 1965-1984FX 1971-1984Additional Information

Electric starter motor bracket has a black finish. Bracket acts as a starter and battery box mount. Fits:FXE 1974-1984 Hitachi starterAdditional Information OEM N

Left side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA

Right side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA

Seat tee measures 13-1/4" from the end of the rear plate to the center of the pivot bushing. Seat "T" is 2" shorter than stock.Seat "T" is used in V-Twin seat kits, 31-4019 and 47-1872. Fits:FLST...

Solo seat mount kit includes the nose bracket, springs, rear brackets and hardware. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - K

Black saddlebag supports are designed to fit the contour of the fender struts and protect your bags from brake caliper and swingarm. Supports are 2 bolt type. Fits:FX 1971-1984FXE 1971-1984Additional...

V-Twin - 31-1473 - License Plate Relocation Bracket BlackDescriptionBlack license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...