Tour Glide FLT

Ignition sensor cup screw with washer.Sold in a pack of 10. *NOTE: Not for sale in California. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FL 1982-1984XL 1982-1999FLT...

Starter pinion gear bushing for electric starter gear and shaft. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA

York starter gear and shaft for use with FX-FL electric starter kit.*NOTE: Starter kit is filled with an OEM type starter, available from different companies. Fits:FL 1965-1984FX 1973-1984Additional...

Starter pinion gear screw. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA Manufacturer

Zinc plated electric starter adapter plate for cast inner primary covers on 4-speed models.Accepts york electric starter kits. Mounts to inner primary with 5/16" screw in front hole and 1/4" in rear...

V-Twin - 32-2066 - Points Cover Insert with Hole RawDescriptionPoins cover insert with hole is constructed of steel with a raw finish. Features center holes for mounting coat rack hook. Fits:FL...

V-Twin - 32-2051 - OE Long Reach Factory Spark PlugDescriptionOE long reach factory plug plug features copper coated electrodes for foul resistance. Fits:FXST 1984-1998FX 1975-1981FLT 1984-1998FXS...

V-Twin - 32-2045 - 1965-1984 FL Electric Starter Kit Description Electric starter kit mounts to existing alloy cast inner to accept a high torque 12 volt starter. Motor includes the integral Bendix...

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:FL 1965-1985Additional Information UOM1 - KIT

2.0 kW starter motor includes a 9 tooth starter gear and 6 screw mounting for electric starter kits.Mounts with 6 screws on face. MFG # WW1370. Fits:FL 1958-1985Additional Information

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin

Accel starter solenoid has a zinc finish.Use 4-Speed style solenoid on 1984-1988 FXST 5-Speed models. Fits:FXR 1982-1988FLT 1979-1988Additional Information

Magneto drive gear set is for use with Burkhardt magneto drive assemblies. Fits:FL 1970-1992Additional Information UOM1 - SET

Turn signal wiring harness kit has PVC covered wires. Fits:FL 1970-1984Additional Information UOM1 - KIT Manuf

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Replica hydraulic brake switch with flag features heavy duty contact and quality brass terminals. This will retro fit to earlier models. Fits:FXST 1984-2003FXD 1991-2003XL 1984-2003FLST 1986-2003FLT...

Battery cable measures 8-1/2" long. Cable is 4 gauge with 17/64" and 11/32" hole sizes with heat shielded terminal ends.Cable is braided. Fits:FXR 1987-1994FLT 1982-1992Additional Information

Battery cable measures 8-1/2" for solenoid to starter.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FLT 1982-1984FXR 1985-1988Additional Information

Battery cable is 6 gauge with 13/32" and 11/32" hole sizes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shielded terminal ends. Use for ground post. Fits:FL...

Auxiliary seat spring frame cross stud with spacer. Fits:FL 1958-1984Additional Information OEM No.52605-65 UO

Auxiliary zinc seat spring kit with chrome springs, brackets, nut set, and buddy seat spring bar.Kit adapts to all plunger mounted buddy seats for extra weight capacity. Fits:FL 1965-1984Additional...

V-Twin - 31-9974 - 9 inch Chrome Rear Turn Signal MountDescriptionChrome 9" rear mount bar for FL and FLST models. Thread pitch is 1/4"-20.Rear turn signal mount measures 6-7/8" center to center...

Auxiliary seat spring yokesSold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52596-65

Auxiliary seat spring bracket catch set.Sold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52586-68

Auxiliary buddy seat spring bar. Fits:FL 1965-1984Additional Information OEM No.52566-65 UOM1 - EA

Auxiliary spring buddy seat bracket set. Fits:FL 1965-1984Additional Information OEM No.52583-68 UOM1

V-Twin - 31-9929 - 10 inch Chrome Turn Signal Mount RearDescriptionChrome 10" rear mount bar.The distance across the holes center to center measures 5-7/8". Fits:FLHTC 2009-2013FL 1974-1984FLHR...

V-Twin - 31-9922 - Chrome 8-1/4 inch Turn Signal Mount Bar RearDescriptionChrome 8-1/4" rear mount bar is cast construction.The distance across the holes center to center measures 6-7/8". Fits:FLHTC...

Zinc plated carburetor upper and lower support bracket with hardware kit is for fitting a CV carburetor to a 1948-1985 Big Twin motor. Kit is used to mount motor case bolt between cylinders.This 2...

Chrome front mount bracket is used with black front mount. Is a stock OE replacement. Fits:FLT 1979-2008Additional Information OEM No.47159-79A

Black seat bracket kit includes seat bracket, right and left bracket. Fits:FXE 1966-1984FLH 1958-1984FXR 1982-1983FX 1966-1984FL 1958-1984FX 1980-1984Additional Information

Chrome top maxi engine mount has a two piece and two bolt construction for secure fastening. Fits:FX 1971-1984FL 1948-1984Additional Information UOM

Solo seat hardware kit includes nose bracket, chrome springs and rear brackets to mount small type solos.Includes a bracket and 2 thick spacers for the use on 1982-1985 FX models.The thick spacers...

Zinc front solo seat mount bracket bolts to frame holes above seat post tube. The seat nose bracket will swivel on this mount.This bracket will also mount to frames with a flat triangular plate at...