Touring Tour Glide Classic FLTC

Bates style solo seat kit includes a genuine Bates style tuck and roll leather solo seat and all mount hardware for installation on 1965-1984 FX-FL 4 speed models with a swingarm frame.*Note: UPS may...

V-Twin - 46-0310 - Dunlop D402 Rear Tire MT90HB X 16 inch BlackwallDescriptionThis rear blackwall tire features a new tread pattern.The new tread pattern emphasizes better wet traction and increased...

Black front and rear hub assembly includes all internals for 3/4" axles.Where the spokes go in is 4-1/2" wide, the center width is 2", the ends are 4" wide, and end to end is 6-5/8" long. *NOTE: Must...

16" chrome front wire wheel cover set includes 1 cover with a hex hole and the other chrome cover with a 4.1" round hole. Set is for pentagon shaped hub flange wheels. For single disc brake wire...

16" chrome rear wheel cover set fits between disc rotor and sprocket, for 1973-1984 FLH spoke wheel models.Set is fastened with 5 bolts. Wheel cover will fit rims/wheels with Side Valve tube type...

40 spoke extra wide offset dual flage rear hub features a chrome finish. The drive side is offset 0.875" further out than standard 1973-1985 style hubs. Includes 3/4" bearings, races, seals and seal...

Chrome front wheel hub includes 3/4" bearings installed, races, seals and seal spacers. Fits:FLT 1984-1999Additional Information OEM No.43404-87

Chrome wheel hub is constructed of steel and includes 3/4" bearings, races, seals, and seal spacers.This hub has 3/8" and 7/16" disc mount holes. The width of the hub through the axle measures 7"...

Steel rear hub without internals. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - EA Locat

This standard nipple set is 22mm long and is cadmium plated.Set of 40 pieces. Fits:FL 1941-1984Additional Information UOM1 - SET

V-Twin - 44-2060 - Swingarm KitDescriptionKit includes 2 offset steel bushings and 2 alloy washers. Fits:FLT 1980-2006FL 1980-2006FLHTC 1980-2006Additional Information

V-Twin - 44-2044 - Swingarm Rebuild KitDescriptionKit includes two bushing assemblies, spacers, plastic retainer rings, plastic dust covers, rubber isolators, and one pivot shaft with lock nut and...

V-Twin - 44-2039 - Swingarm Retaining Ring PlasticDescriptionPlastic swingarm retaining ring. Fits:FXR 1987-1994FLT 1980-2001Additional Information

V-Twin - 44-2034 - Wheel Hub Bearing Tube Spacer 4.448 inch Overall LengthDescriptionFront or rear wheel hub bearing tube white spacer. This spacer measures 4.448" overall length for use on cast...

V-Twin - 44-2033 - Wheel Hub Bearing Tube Spacer 4.434 inch Overall LengthDescriptionFront or rear wheel hub bearing tube yellow spacer. This spacer measures 4.434" overall length for use on cast...

V-Twin - 44-2032 - Wheel Hub Bearing Tube Spacer 4.420 inch Overall LengthDescriptionFront or rear wheel hub bearing tube red spacer. This spacer measures 4.420" overall length for use on cast wheels...

V-Twin - 44-2029 - Wheel Hub Bearing Shim .008 ThickDescriptionWheel hub bearing shim is .008 thick. Fits:FLT 1982-1999Additional Information

V-Twin - 44-2027 - Front Wheel Hub Bearing Shim .032 ThickDescriptionWheel hub bearing shim is .032 thick. Fits:FXR 1982-1994FLT 1979-1999Additional Information

V-Twin - 44-2026 - Wheel Hub Bearing Tube SpacerDescriptionWheel hub bearing tube spacer. Fits:FLT 1982-1999Additional Information

V-Twin - 44-2009 - Chrome Rear Axle Adjuster End Plate SetDescriptionChrome rear axle adjuster end plate set.Sold as a pair Fits:XL 1979-UPFX 1973-1984FL 1973-1984Additional Information

V-Twin - 44-1996 - Swingarm Pivot Pin with 1 inch Longer PinDescriptionSwingarm pivot pin is 1" longer.Order nut separately. Use with a 5/8" X 18 threads per inch nut. Fits:FX 1971-1984FL...

V-Twin - 44-1984 - Swingarm Pivot ShaftDescriptionSwingarm pivot shaft only measures 12" x 5/8". Fits:FXR 1982-1988FLT 1982-1988Additional Information <

V-Twin - 44-1976 - Wheel Hub Bearing and Seal KitDescriptionWheel hub bearing and seal kit is a deluxe kit which includes 2 of each type of seal and 2 tapered bearings. Also used for swingarm...

V-Twin - 44-1973 - Chrome Swingarm Pivot KitDescriptionChrome swingarm pivot kit includes races, bearings, spacers, lock tab, and pivot pin. Fits:FX 1976-1984FL 1973-1984Additional Information

Axle with threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Includes spacers and nut. Fits:FXST 1985-2006FLST 1986-2006FLT 1980-1984FLT...

V-Twin - 44-0599 - Chrome Front Axle Nut and Washer KitDescriptionChrome front axle nut & washer kit. Fits:FXST 1984-UPFLST 1986-UPFL 1973-1984FX 1980-1983Additional Information

Kit includes chrome 10-5/8" bearing surface length axle with 3/4" outer diameter, nut kit, 2 spacers and washers. Fits:FXST 1984-2006FL 1973-1984 41mm forksFX 1980-1983 41mm forksAdditional...

Chrome rear axle kit is chrome and includes 12-3/8" bearing surface length axle, nuts, and spacer. For belt drives. Fits:FX 1982-1984FL 1982-1984Additional Information

Kit includes chrome 11-7/8" bearing surface length, axle, nuts, and spacer. Fits:FX 1973-1984FL 1973-1984Additional Information OEM No.41552-73<

V-Twin - 44-0554 - Brake Disc SpacerDescriptionzinc spacer has an outer diameter of 7/16" and an inner diameter of 5/16", with a 5/16" length.Brake disc spacers will adapt 1973-up FX, FL rear hubs to...

Pull adjuster only. Fits:FX 1985-1985FX 1973-1984FL 1973-1984FL 1985-1985Additional Information UOM1 - SET

Assembly includes 2 of each bearing, race, seal and one seal spacer.Order snap rings, seal washer and internal bearing spacers separately. Fits:FLT 1984-1999 steel hub, wire wheelFXST 1986-1999 steel...

V-Twin - 44-0520 - Chrome Rear Axle Nut KitDescriptionChrome axle nut kit includes a 5/8"-18 hex nut, 2 extra thick washers and 1 lock washer.For use on square swingarms. For 3/4" axles, universal. ...

Chrome 3/4" axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Axle features a chrome finish.Does not have hole for cotter...

Bearing kit includes two tapered bearings and two races.Bearing is a 1 piece pressed steel cage that retains rollers on the cone and spaces them evenly. Fits:FXD 1991-1999 Front and RearFL 1973-1984...

Rear wheel hub bearing race and seal kit includes two each of bearing, race, and proper seals. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearXL 1979-1999 RearFX...

Front wheel bearing race and seal kit includes 2 each of the bearing, race and seals. Fits:FXD 1991-1999 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST 1986-1999...

Bearing hub race has an outer diameter of 1.776". Race is manufactured to meet OEM specifications for long lasting durability and performance. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST...

Tapered bearing minimizes friction. Bearing is for a 3/4" axle. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST...

Swingarm bearing and race is for 3/4" axle.The cup outer ring has a 1.781" outside diameter, cone inner ring has a .75" inside diameter. Cone and cup assembly have a .656" width. Bearing and race are...