Touring Tour Glide Classic FLTC

V-Twin - 35-2031 - 47mm OKO Shorty Carburetor Kit BlackDescriptionPerformance 47mm shorty carburetor with a black finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated...

V-Twin - 35-2001 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits 1936-up Big Twin overhead valve models. Fits:FL 1936-UPEL 1936-UPE 1936-UPAdditional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Black intake manifold clamp set is two piece type without seals. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 -

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Friction spring throttle tension screw fits 1974-2022 with single or dual throttle.Sold in a pack of 10. Fits:XL 1974-2022FXR 1982-1994FL 1974-1984FX 1974-1984FXD 1991-2017FLST 1986-2017FXST...

40mm CV carburetor kit includes a replica 40mm CV carburetor, manifold adapter, intake clamps, a late flat intake manifold seal and an adapter ring kit.Throttle is operated by single pull cable...

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

2024 New Production natural alloy cast 1-7/8" intake manifol d is the flat seal type for use on OKO and S&S carburetors as a stock replacement.Machined for use with S&S and OKO carburetor...

Solid stainless steel intake manifold clamp kit is flexible for a form fit around the seals. Includes Vtwin's original "Red" flat seals. Fits:XL 1978-1985FL 1978-1984Additional Information

OKO Keihin carburetor kit with single throttle operation is for Ironhead models. Original butterfly type with choke and accelerator pump as original, with OEM type manifold and clamps. Flat seals...

Throttle housing features a chrome finish and is for use with 1981-1995 dual cables. Fits:FL 1981-1995Additional Information UOM1 - EA

Polished OKO hex petcock includes 22mm hex nut for installation.Includes stainless steel screen. *NOTE: Spigot faces under the body for 5/16" fuel outlet. Fits:FL 1975-1985XL 1975-1985FX...

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional...

V-Twin - 35-0892 - 1/4 inch Turn Throttle KitDescription1/4" turn throttle kit includes a 60" cable, hillclimber grip set and a 1" handlebar throttle assembly. Fits:FL 1976-1996XL 1976-1996FX...

Heavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information

Black intake manifold clamp set includes flat style seals and fillister screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome notch petcock with angle fitting and knob, features a 360  swivel high capacity elbow and includes a straight fitting, full reserve and lever control for on/off and reserve.Petcock features an...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome hex petcock has inward facing outlet and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on...

Sifton chrome petcock forward facing with 3/8" outlet with nut.Petcock features solid brass construction with on and off and reserve positions and screen. Designs are made for a seated position on...

Linkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. Fits:FL 1941-1984Additional Information OEM No.27375-29

Replica zinc intake manifold clamp set features fillister head screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information OEM No.

Intake manifold clamp update kit is used to update early intakes to late style seals or when intake flanges are damaged on early heads. Kit includes manifold rings, silicone seals, and stainless...

Stainless steel intake manifold clamp set includes flat type seals and fillister screws.*NOTE: May require thicker manifold seal. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information

Stainless steel power intake clamp set features a "floating bridge." Kit includes flat seals.This kit closes the gap under the "T" bolt for a total 360  wrap around seal. *NOTE: Includes USA made...

Chrome petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for...

Keihin carburetor main jet is 1.80mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.75mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.70mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.65mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .88mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is 1.00mm Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT 1984-1989Additional Information

Keihin carburetor slow jet is .65mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .72mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT 1979-1989Additional Information

Keihin carburetor slow jet is .75mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information