1984

Colony - Transmission Kicker Cover Stud Kit fits '36-'84 Big Twin Models (OEM #24818-52, 33298-36) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - Cylinder Base Acorn Hardware Kit fits '78-'84 Big Twin Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Colony - Cam Cover Acorn Hardware Kit fits '70-'99 Big Twin Models (Except Twin Cam) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - 8707-6 Oil Pump Plug Kit fits '81-'84 Big Twin Models Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - 8224-8 Rocker Shaft End Plug fits '71-'84 Shovelhead & '71-'85 Sportster Models (OEM #17448-71A, 7875) Features: Complete sets stock-style replacement rocker shaft end plugs, nuts, and washers Made in the U.S.A...

Drag Specialties - Fat Bob-Style 3½-Gallon Gas Tank fits '48-'84 FX/ FL & Custom Frames to '84 Models Features Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks Gas caps sold...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 33-1/2" Black Vinyl Idle Cable (Repl. OEM #56337-83) Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth operation and long life Length...

Drag Specialties - 30" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - 59-5/16" Black Vinyl High-Efficiency Clutch Cable fits '80-'86 Big Twin Models (5-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve...

Drag Specialties - 10" Rear Vintage Drilled Brake Rotor Shovelhead - Polished Stainless Steel (Repl. OEM #41806-72B/ 41813-79) Features: Drilled for better heat dissipation and faster braking in wet...

Drag Specialties - Front Brake Caliper fits '72-'84 Touring Models (OEM #4400880) Features: OEM-style calipers in chrome finish Complete with all necessary mounting hardware and brake pads Check caliper-to-wheel clearance on custom wheels...

Drag Specialties - Chrome 4-Piston Front Left Brake Caliper fits '84-'99 Big Twin Models (OEM #4404684) Features: Direct bolt-on design Calipers include brake pads and bleeder screws Not for Springer (front) or Deuce (rear). Pre-'00 applications...

DP - High-Performance Friction Clutch Plates fits L'84-'89 Big Twin Models (Repl. OEM #s 37931-84 & 37930-84A) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free performance. Qty. Included:...

DP - Heavy-Duty Clutch Kit fits '84-'99 Big Twin Models This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to store and transport parts, tools or other...

DP - Heavy-Duty Clutch Kit fits '71-E'84 Sportster Models This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to store and transport parts, tools or...

DP - High-Performance Friction Clutch Plates fits L'84-'90 Sportster Models (Repl. OEM #36788-84) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free performance. Qty. Included:...

Drag Specialties - Oil Pump Assembly fits '73-'91 Big Twin Models This is a high-quality replacement cast aluminum pump body with steel gears and a shaft. Features Raw cast aluminum finish Gaskets and seals included; mounting hardware sold...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Stainless-Steel) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Brass) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

S&S Cycle - 3.625" Bore Shovelhead Cylinder Kit fits '66-'84 Shovelhead Engines This Bore Shovelhead Cylinder Kit comes complete with front and rear cylinders, base nuts, headbolts, base gaskets and head gaskets. NOTE: 3.625" bore cylinders require...

Old-STF Cycle - Stainless/Black Rocker Box Split Oil Line fits '66-'84 Shovelhead The Old-STF Cycle Stainless/Black Rocker Box Split Oil Line is a high-quality kit that is designed to fit Shovelhead motorcycles from 1966 to 1984. This kit features...

V-Twin - York FXR Rear Chain Drive Kit fits '83-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth rear steel sprockets with a 120-link gold seal chain. It features a 22-tooth...

Prism Supply Co. - Natural Stainless Steel Footpeg Support Bar Set fits Shovelhead/ Evo Motors w/ Cone Open Primary This Footpeg Support Bar Set is designed for frames featuring an installed "cone" type motor. It accepts female chopper footpegs that fit...

GMA - Classic Chrome 2-Piston Front Brake A-Caliper fits '73-'84 FLH Model (Single Disc) These front brake calipers are constructed with billet aluminum with a smooth or classic "fin" design. The single-disc applications require the 5/8" bore master...

Hard Drive - Chrome Oil Tank Brackets fits '84-'93 Softail Models This kit includes front and rear oil tank mount brackets.  

Jagg - Deluxe Diamond Cut Oil Cooler System This special edition oil cooler kit is as spectacular and durable as the gem it is named after. It is the perfect solution for Harleys with perimeter, vertical frame tubes. This cooler mounts to the left frame...

Jagg - Low Mount 10-Row Horizontal Oil Cooler fits '84-'08 Touring Models Jagg's 10-Row Low Mount Oil Cooler System was designed to help Twin Cam engines deliver optimum heat exchange and flow characteristics through the use of HyperFlow Technology...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

Dunlop American Elite MH90-21 Front Tire These American Elite tires by Dunlop are size MH90-21 and are made for use on Harley Touring and Cruiser type models. Features: The only replacement motorcycle tires for Harley-Davidson® bikes...

Drag Specialties - Buckhorn 1" Handlebars - Notched for TBW Drag Specialties 1" Buckhorn style handlebars for Harley model and custom applications. These bars are notched for Throttle By Wire (TBW) applications. Features: Available in a Chrome,...

Features: Billet 6061 aluminum Drilled with 1/2" hole for internal wiring Works with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Base hole tapped for standard 1/2-13 mounting bolts (bolts not included) Fits...

The H2 Bars look good on everything!  Features 1-inch O.D. x 0.120 wall seamless 4130 chromoly tubing with precision mitered and TIG welded joints. Threaded bungs on vertical uprights are CNC-machined chromoly steel with1/2-13 t.p.i. holes to...

Black 1-3/4" exhaust pipe mounting bracket is used to mount drag pipes on mufflers with the use of T bolts. Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits 1957-1978 XL models. Measures 6-3/4" from front left hole to stud, 2"...

Thrashin Supply Co. - Aggressor Floorboards Features: Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek and timeless design Featuring 24 cone-shaped stainless steel cleats per floorboard Large,...

Thrashin Supply Co. - Aggressor Foot Pegs Features: Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek and timeless design Twelve replaceable cone-shaped stainless steel cleats per footpeg Cutaway...

ODI - Ruffian Lock-On Harley Grips - Cable Throttle Features: Moto inspired grip designed for performance V-Twin models Legendary Ruffian full-knurl diamond pattern Thin profile delivers amazing control, feedback and traction Proprietary...

Mustang - Extended Arm Backrest fits '99-'13 FLT/​FLHT w/ King Tour-Pak Features: Original-style wraparound backrests with 2" longer armrests match Mustang or later-model stock Harley-Davidson seats Complete kit includes rubber mounts to fit models...

Mustang - Passenger Pad w/ Armrest fits '99-'13 FLT/​FLHT w/ King Tour-Pak Features: Original-style wraparound backrests with 2" longer armrests match Mustang or later-model stock Harley-Davidson seats Covering made of highest-quality expanded...

Mustang - Hinge Mount Perewitz Solo Seat fits '82-'94, '99-'00 FXR Model Features: Low, lean solo seats designed by Jody Perewitz, the fastest woman to ride an American V-Twin High-quality construction, with a 16-gauge steel baseplate and carbon...