Super Glide Sport Glide FXRT

Le Pera - Plush Pillow 2-Up Seat fits '82-'94, '99-'00 FXR Models Features: Plush, two-piece pillow style assembled on a sturdy steel baseplate Features durable black Naugahyde® covers accented...

Magnum Shielding - 3030T - Spark Plug Wires - Candy Apple Red - FXRFeaturesBraid perfectly matches all other Magnum cables and brake linesHigh-voltage, high temperature 8 mm silicone ignition wire...

Magnum Shielding - 3030S - Spark Plug Wires - Polished - FXRFeaturesBraid perfectly matches all other Magnum cables and brake linesHigh-voltage, high temperature 8 mm silicone ignition wire with an...

Lyndall Racing Brakes Llc - 7059X - X-Treme Brake Pads - Harley-DavidsonFeaturesThese brakes will give you a 0.6 coefficient from ambient to first fade and a 0.6 coefficient from first recovery to...

Le Pera - Black Daytona Sport Solo Seat fits '82-'94, '99-'00 FXR Models Features: Made with a molded one-piece foam foundation and covered with premium-grade black vinyl on a 16-gauge...

Le Pera - Black Smooth Daytona 2-Up Seat without Backrest fits '82-'94, '99-'00 FXR Models Features: Low, sleek style retains back support for maximum rider comfort Seat base plate is 16-gauge...

Magnum Shielding - 3030C - Spark Plug Wires - Sterling Chromite - FXRFeaturesBraid perfectly matches all other Magnum cables and brake linesHigh-voltage, high temperature 8 mm silicone ignition wire...

Le Pera - Black Daytona Sport Seat fits '82-'94, '99-'00 FXR Models Features: Molded one-piece foam foundation covered with premium-grade black vinyl in a smooth design Low, sleek style that...

Clevis pin fits 1982-1986 FXR brake pedal assemblies. The pin is serrated on the shoulder end. Sold as a pack of 5. *NOTE: Accepts cotter pin (OEM #515) not included. Fitment: FXR 1982-1986

FXR/FLT starter plug for the starter pivot arm. Starter plug is 1/4 inch NPT x 15/32 length x 1/4 inch. Sold in a pack of 5. Instructions: http://www.vtwinmfg.com/Instructions/12/12-1783...

FXR steel shifter lever features a chrome plated finish. Fitment: FXR 1982-1994

FXR stainless steel heel toe shifter lever is a one piece deseign for 5-speed models with mid controls. Includes 2 rubber pads. *NOTE: The distance from the center of the spline to the very end of...

FXR kickstand mount bracket features a raw finish and must be welded in place. Accepts stock kickstand pin and spring. Fitment: FXR 1982-1994

Black exhaust bracket mounting block is for FXR models. Fitment: FXR 1982-1986

FXE rear exhaust mount kit includes a black bolt on style rear pipe bracket and zinc hardware. *NOTE: The bracket bolts to the pivot bolt hex bolts to replace the weld-on bracket. Fitment: FXR...

FXR horn mount bracket is the later version with a zinc plated finish. Tech Notes: Suggested to use with #33-2116 Replica Replacement Horn Black Fitment: FXR 1984-1994

Exhaust bracket for FXR models features a raw finish. Support bracket is welded to the frame to house the isolator block available separately. *NOTE: Must order hardware separately. Fitment: FXR...

FXR exhaust mount bracket. FXR exhaust mount bracket is mounted with (2) 7/16-20x1* pivot bolt cap screws. Our bracket mounting block can be bolted on to the opposing side using (2) 5/16-24x 5/8...

Battery strap clamp for FXR models features a black finish. Includes nut that is welded in place. Use with 1/4 x 20 bolt 1-1/2 inch hex head and 1/4 x 20 jam nut. Fitment: FXR 1984-1988 FXR 1990-1994

FXR pipe bracket kit includes a raw weld on type bracket and an ISO mount block. *NOTE: Bracket must be welded on. Fitment: FXR 1982-1994

Silver dash panel decal set. Sold as a 2 piece set. Fitment: FXR 1982-1994

Sold as a pair. Fitment: FXR 1982-1994

Rear axle adjuster has a 3/4 inch inner diameter and includes heavy pull blocks and two 1/4 inch-20 x 2 inch full thread allen cap screws. Fitment: FXR 1982-1994

WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR shifter shaft bushing includes 4 o-ring alloy type with two bronze bushings on each end. Sleeve is used to replace the stock plastic part. Fitment: FXR 1984-1994

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

Zinc plated FXR pedal rod end 4 piece kit includes the rod end zinc clevis pin zinc 5/16 inch x 24 thread nut and a cotter pin. *NOTE: Measures 2-3/8 inch from the hole to the end of the thread...

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

2023 New Production black kickstand is stock length and includes pin for FXR models. Fitment: FXR 1982-1990

FXR frame side cover set is constructed of black ABS plastic with vented panels. Sold as a pair. Requires (4) 1/4 inch-20 x 1-3/4 inch allen bolts and (4) 1/4 inch flat washers. Tech Notes: Required...

This replaces the original plastic unit on the 1982-up models. Thread is 3/8 inch x 28 TPI. Holes on the back measure starting with the small one closest to the bottom and working to up: #8-32* 5/16...

James Gaskets - JGI-18633-48-KF - Tappet Block Gasket - Fits '48-'99 Big Twin Models (.020” Foamet®) - Pair Fits: '48-'99 Big Twin Models (.020” Foamet®). Full year/model list is on the Fitment tab...

James Gaskets - JGI-65781-82 - Crossover Exhaust Gasket - Fits '86-'03 Sportster Models - Pair Fits: '86-'03 Sportster Models. Full year/model list is on the Fitment tab. Crossover Exhaust Gasket...

James Gaskets - JGI-16779-99-X - 1 Piece Lower Rocker Housing Gasket - Fits '86-'22 Sportster Models (Except RH Sportster - Pair Fits: '86-'22 Sportster Models (Except RH Sportster. Full year/model...

James Gaskets - JGI-16777-94-S - 3.625" Big Bore Metal Base Gasket - Fits '84-'99 Evolution Big Twin Models - Pair Fits: '84-'99 Evolution Big Twin Models. Full year/model list is on the Fitment tab...

James Gasket - 35 mm Fork Seals fits 'L86-'87 Sportster Models (OEM #45387-83) Features: High-quality replacement components Available in dealer packs of ten (sold each) or in packs of two (sold...

James Gaskets - JGI-16777-96-X - 4.000" S&S Cylinders Front/Rear Metal Base Gasket - Fits '84-'99 Evolution Models - Pair Fits: '84-'99 Evolution Models. Full year/model list is on the Fitment tab. 4...

James Gaskets - JGI-25225-70-XM - 0.036” Cam Cover Gasket - Fits '70-'92 Big Twin Models (Metal Core, Paper Facing w/ Silicone Fits: '70-'92 Big Twin Models (Metal Core, Paper Facing w/ Silicone...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM...