Super Glide Sport Glide FXRT

V-Twin - Oil Pump Plug fits '84-'98 FXST, '82-'94 FXR, '57-'76 Sportster Models Oil pump plug. Fitment: FXST 1984-1998 UL 1937-1948 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984...

V-Twin - Offset Riser Kit fits '82-'94 FXR Model Chrome FXR riser kit includes offset riser stems with a finned riser top clamp. Mounts with 1/2" x 13 hex bolts. Note: Stock height. Fitment: FXR...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve...

V-Twin - Transmission Motor Support fits '82-'94 FXR Model Zinc plated transmission motor support features laser cut 1/4" steel with all holes in place. Includes the tab for front exhaust mounts...

V-Twin - 25-1/2" Hard Chrome 35mm Fork Tube Set fits '85-'86 Sportster & FXR Models (OEM #45392-83) Features: Hard Chrome 35mm fork tube set has stock length of 25-1/2". For Showa front ends Before...

Features: Fork tube set are 23-1/4" stock length Before installing, compare new and old tubes Be sure the stock top plug threads it into the new fork tubes Sold as a pair Note: These are...

Colony - Transmission Mounting Hardware Kit fits '77-'84 Shovelhead Model (OEM #47730-77) Features: Kit includes two carriage bolts, one 3/8" - 16 x 1" bolt, four 3/8" - 24 nuts, six 3/8" lock...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers,...

V-Twin - Chrome 48" Handlebar Switch Kit fits Big Twin Models Handlebar switch kit includes complete right and left switch assemblies, brake light switch, mounting screws, and clips. Switch kit...

V-Twin - Swingarm Bearing Kit with Spherical Bearings fits '82-'02 FLT, '82-'94 FXR Models Swingarm bearing kit with spherical bearings controls lateral and torsional movement at pivot point Kit...

V-Twin - Brake Pedal Polished Alloy fits '82-'94 FXR Model (OEM #42523-82) FXR brake pedal has a polished alloy finish and includes the bushings installed Note: Must order rod end, wave washer,...

V-Twin - Primary Gasket Kit fits '85-'94 FLT, '84-'93 FXR Models FXR/FLT Primary gasket kit is a three piece kit Fitment: FLT 1985-1994 FXR 1984-1993 Late 1984

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is the...

V-Twin - Shifter Rod Assembly fits '82-'94 FXR Model (OEM #33728-82A) FXR shifter rod assembly includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation...

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation...

V-Twin - Rear Brake Plunger Zinc Plated fits '82-'87 FXR Model (OEM #42437-82) Zinc plated FXR rear brake plunger features a 5/16" x 24 thread and measures 2-7/8" from the hole to the end of the...

V-Twin - 35mm Triple Tree Set Chrome fits '82-'87 FXR Model 35mm FXR triple tree set features a chrome finish. Fitment: FXR 1982-1987

V-Twin - Stock Kickstand Black fits '82-'90 FXR Model Features: Stock length kickstand features a black finish and is for FXR models Pin not included, must order separately Fitment: FXR 1982-1990

V-Twin - Fuel Petcock Alloy fits '82-'94 FXR Models Fuel petcock with 90° elbow features an alloy finish specifically designed for FXR models. Note: Petcock has a 5/16" fuel outlet. Fitment: FXR...

V-Twin - Rear Axle Kit Zinc Plated fits '82-'94 FXR Model FXR rear axle kit includes zinc plated components and has a 3/4" diameter. Fitment: FXR 1982-1994

V-Twin - Evolution Intake Manifold Conversion Kit (OEM #27019-83) Evolution intake manifold conversion kit converts stock rubber compliance fittings to a more rigid mount system. Includes flange set...

Colony - Fork Drain Screws fits '94-'98 FXD, '84-'94/'99-'00 FXR Models (OEM #45790-80, 45996-73) Features: Two button head Allen screws with two copper compression washers Made in the U.S.A...

Colony - Universal Line Fitting fits '52-'99 Big Twin & '57-'85 Sportster Models (OEM #63578-52) Features: OEM replacement restoration For use with 5/16" hose

Colony - 9876-2 Chrome Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA

Alloy Art - Heavy-Duty Handlebar Riser Bushings fits '84-'17 Softail, '73-'86 FX, '82-'00 FXR, '91-'17 Dyna & '86-'03 Sportster Models (Exc. '11-'13 FXS, '00-'17 FXSTD & '08-'12 FXDB Models) These...

V-Twin - Chrome Dash Panel fits '82-'92 FXR Models This FXR dash panel has a black finish and comes with holes to accommodate the fuel gauge and gas cap instruments. Suggested to use with #39-0242...

V-Twin Black Steel Side Cover Set Fits '84-'94 FXR/FXRS Models This set of side covers replaces OEM Part No. 66351-82. Features: Frame side cover set is constructed of steel and has a smooth chrome...

LA Choppers - County Shifter fits '99-'24 Touring, '09-'25 H-D FL Trike & '00-'17 Softail Models This shifter is a precise replacement for the stock shifter that works with mid controls. Available...

Thrashin Supply - Expedition Saddlebag Thrashin Supply's Expedition Saddlebag is compatible with most stock tail light and blinker assemblies, but these assemblies need a minimum of 15" between the...

Thrashin Supply - Essential Saddlebags Features: Made of 1680D Denier Ballistic Nylon Lightly Structured to hold shape Easy on, Easy off i

Thrashin Supply - Escape Saddlebags  Features: Easy-on, easy-off installation Made from 1680-denier ballistic nylon Structured to hol

V-Twin - Black Dash Panel fits '82-'92 FXR Models This FXR dash panel has a black finish and comes with holes to accommodate the fuel gauge and gas cap instruments. Suggested to use with #39-0242...

V-Twin - Chrome Brake Pedal fits '82-'94 FXR Models V-Twin's FXR brake pedal features a chrome finish. NOTES: Includes the clevis with pin. For FXR mid control applications. Features OEM No.:...

V-Twin - Black FXR Mid-Control Kit fits '82-'94 FXR Models V-Twin's replica black driver bracket set is designed to mount passenger style pegs. The set features a right mount bracket, a right...

Arlen Ness - Diamond Cable Grips fits 1" Handlebars These diamond-design rubber grips feature integrated knurling inside each diamond-shaped pocket for a vintage look with outstanding hand traction...

Avon Grips - Old School Waffle Grips 1"- Black The true old-school "soda bottle" look Features: Made from Kraton rubber for a great feel and a vintage appearance Will not dry, harden or...

Avon Grips - Old School Jack Hammer Grips 1" - Black The true old-school "soda bottle" look Features: Made from Kraton rubber for a great feel and a vintage appearance Will not dry, harden or...

Pro-One - Riser Bushing Kit fits '73-'13 Softail, FX, FXR, Dyna, XL Harley Davidson - Gold Features Kit contains high-quality polyurethane bushings that reduce handlebar slop &...

Burly Brand - Raked Dominator Handlebars (Choose Height) Burly Brand's Dominator style T-Bars provide a responsive handling position without eliminating comfort or looks. They are crowned for...

Thrashin' Supply - 10" Hole Shot Risers  Crafted from 6061 aluminum, the Thrashin Supply Hole Shot risers are compatible with any standard 1" handlebar and will fit on all models with 3.5"...