Wide Glide FXWG

V-Twin - 24-0186 - Chrome Fork Tube Cap Non-VentedDescriptionFork tube cap is non-vented with a thread size of 5/8" x 18 and has a domed top.Sold as a pair. Fits:FXWG 1980-1986FXST 1984-UPFLST...

Zinc fork stem nutThread is 1"-24. Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999FX 1980-1986Additional Information OEM No.

Progressive wound fork springs feature high quality and high performance.Springs eliminate front end sag, reduce nose dive under braking, improve cornering stability, increase ride comfort and allow...

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Chrome triple tree lower without lock tab features a 3  rake built in. Fits:FXST 1984-1999FXWG 1980-1986Additional Information UOM1 - EA

Fork tubes are 20-7/8" stock length.Before installing, compare old and new tubes. Be sure the stock top plugs thread into the new fork tubes. Sold as a pair. *NOTE:...

Fork tubes are 24-1/4" stock length.Tube set is stock FXST length but would be an extended length if used on FLST. Set of two. Before installing, compare old and new tubes. Be sure the stock top plug...

Accepts 41mm fork tubes. Fits:FXWG 1980-1986FXST 1984-1988Additional Information OEM No.45672-80 UOM<

Set accepts 41mm fork tubes. Bottom tree features built in rake and rounded edges. Fork lock tab is welded to the lower tree.Spacing of the fork legs is 10" center to center. Fits:FXST 1984-1987FX...

V-Twin - 23-1996 - Rear Master Cylinder Reservoir Fitting SetDescriptionReservoir fitting for use on a rear master cylinder.Sold in a set of two. Fits:FXR 1982-1985FLT 1982-1985FX 1982-1985Additional...

V-Twin - 23-1758 - Brake Pedal Spring WasherDescriptionBrake pedal spring washer.Sold in a quantity of 2. Fits:FX 1983-1986FXST 1984-1986XL 1982-UPAdditional Information

Caliper adapter features billet alloy construction, comes with bolts and features a polished finish.*NOTE: Converts 3-1/2" on center to 2-3/4" on center, to adapt 2000-up calipers to 1984-1999 model...

Chrome girling rear caliper bracket is for 11-1/2" disc. Fits:FX 1983-1985 with 11-1/2" discFXST 1984-1986Additional Information UOM1 - EA<

Daniel Boone forward control kit with rubber includes right side hydraulic pedal assembly, left side shifter, rubber brake pedal peg and Cat's Paw rubber covered footpeg set.Accepts Kelsey type...

V-Twin - 22-0802 - Shifter Control KitDescription4 speed kit with down turn shifter includes frame mount shifter bracket, splined inner shifter lever, chrome shifter lever, shifter peg with long...

Chrome Daniel Boone forward control kit includes left side shifter and a right side brake only to accept Kelsey type rear master cylinder.Accepts Kelsey type master cylinder. Order brake line and...

Chrome Daniel Boone forward control kit is for the left side only. Kit includes rod for use with 4 & 5 speed models.Kit may be used as a jockey pedal with the correct rod. Fits:FX 1979-1999Additional...

Black powder coated billet aluminum standard forward control kit includes black with chrome accent swiss cheese footpegs.*NOTE: The master cylinder is 5/8" bore.

V-Twin - 21-2093 - Rubber Shifter Peg White with ScrewDescriptionRubber white shifter peg includes button head allen screw for mounting. Thread is 5/16 x 24" to thread into shifter lever.*NOTE:...

V-Twin - 21-2092 - Rubber Shifter Peg Black with ScrewDescriptionRubber black shifter peg with chrome allen screw for mounting. Thread is 5/16" x 24 to thread into shifter lever. Fits:FL 1970-UPFX...

V-Twin - 21-2068 - Shifter Arm with SplineDescriptionStainless steel shifter lever with spline.The shifter peg mounting hole is threaded to fit 5/16-24. Fits:FX 1981-1986FXDWG 1991-2017FXST...

V-Twin - 21-2021 - Shifter Rod Assembly CadmiumDescriptionShifter rod assembly has a cadmium finish with 2 ball swivel ends. Fits:FXE 1974-1985FX 1974-1985Additional Information

Forward shifter mount bracket and arm kit includes a chrome bracket, inner arm and nylon vibration washers.*NOTE: Accepts FXST style male footpegs. Fits:FXWG 1980-1986FXST 1984-1989Additional...

Male footpeg stud features a zinc finish. Fits:FL 1941-1985FX 1973-1985Additional Information UOM1 - EA

Shift lever bolt kit includes a chrome hex screw washer, chrome acorn nut and nylon washer set.*NOTE: Nylon washer set for use as requires. Fits:FL 1970-1984FX 1980-1999Additional Information

V-Twin - 20-0349 - Pulley Brake Disc Spacer Alloy 1/4 inch ThicknessDescriptionAlloy 1/4" thick pulley and rotor spacer provides offset when required with a 7/16" bolt hole.For spacing out rear...

1-1/2" sprocket pulley spacer is machined with counterbore for positive alignment and features an alloy consturction.This is the 5 hole type to space rear sprocket or pulley for alignment. Fits:XL...

V-Twin - 19-0414 - Pulley Brake Disc Spacer Steel 5/16 inch ThicknessDescriptionSteel 5/16" thick pulley and rotor spacer provides offset when required with a 7/16" bolt hole. The spacer measures...

V-Twin - 19-0413 - Pulley Brake Disc Spacer Steel 1/4 inch ThicknessDescriptionSteel 1/4" thick pulley and rotor spacer provides offset when required with a 7/16" bolt hole. The spacer measures...

V-Twin - 19-0128 - Pulley Brake Disc Spacer Steel 3/16 inch ThicknessDescriptionSteel 3/16" thick pulley and rotor spacer provides offset when required with a 7/16" bolt hole. The spacer measures 2...

Shifter pivot end measures 5/16" x 24. Fits:XL 1975-1976FX 1974-1985Additional Information OEM No.42585-75

2nd gear for countershaft, 24 tooth stock ratio, fits 4- speed Big Twin models. Fits:FXWG 1980-1985FXST 1984-1985FX 1980-1985Additional Information

4-speed transmission rotary top shifter arm features a one piece design.For rotary, cow-pie or maytag, as these transmission tops are referenced on the 4-speed transmission. Fits:FL 1979-1985FX...

Kick starter arm kit features a naturl finish with forged stainless steel offset arm. Kit includes alloy Knucklehead kick starter pedal. Fits:XL 1971-1976FL 1954-1985FX 1971-1985Additional...

2019 New Production replica transmission countershaft 1-2 shifter large clutch gear, fits 4-speed Big Twin models.*NOTE: Large shifter clutch. Fits:UL 1937-1948FXST 1984-1985FX 1980-1985EL...

Wheel hub race removal tool set includes 2 pieces, the race puller and driver.This measures 1-3/4" from the back of the screw to the front bend. Fits:FL 1973-1999FX 1973-1999Additional Information

Pushrod cover hardware kit includes 44 pieces. Fits:FL 1948-1999FX 1972-1999Additional Information UOM1 - KIT

Countershaft o-ring Fits:FXST 1985-1986FX 1985-1986Additional Information OEM No.11166 UOM10

This 41mm fork seal set is molded with factory part number and is sold in pairs. Fits:FLT 1980-1984FL 1977-1983FX 1980-1986Additional Information

V-Twin - 13-1945 - 41mm Fork Lower Damper Tube Spring SetDescriptionFork lower damper tube spring set.Sold as a pair. Fits:FLST 1986-2005FLT 1979-2005FL 1977-1984FXST 1984-2005FX 1980-1986Additional...