Wide Glide FXWG

Chrome girling rear caliper bracket is for 11-1/2" disc. Fits:FX 1983-1985 with 11-1/2" discFXST 1984-1986Additional Information UOM1 - EA<

Daniel Boone forward control kit with rubber includes right side hydraulic pedal assembly, left side shifter, rubber brake pedal peg and Cat's Paw rubber covered footpeg set.Accepts Kelsey type...

V-Twin - 22-0802 - Shifter Control KitDescription4 speed kit with down turn shifter includes frame mount shifter bracket, splined inner shifter lever, chrome shifter lever, shifter peg with long...

Chrome Daniel Boone forward control kit includes left side shifter and a right side brake only to accept Kelsey type rear master cylinder.Accepts Kelsey type master cylinder. Order brake line and...

Chrome Daniel Boone forward control kit is for the left side only. Kit includes rod for use with 4 & 5 speed models.Kit may be used as a jockey pedal with the correct rod. Fits:FX 1979-1999Additional...

Black powder coated billet aluminum standard forward control kit includes black with chrome accent swiss cheese footpegs.*NOTE: The master cylinder is 5/8" bore.

V-Twin - 21-2093 - Rubber Shifter Peg White with ScrewDescriptionRubber white shifter peg includes button head allen screw for mounting. Thread is 5/16 x 24" to thread into shifter lever.*NOTE:...

V-Twin - 21-2092 - Rubber Shifter Peg Black with ScrewDescriptionRubber black shifter peg with chrome allen screw for mounting. Thread is 5/16" x 24 to thread into shifter lever. Fits:FL 1970-UPFX...

V-Twin - 21-2068 - Shifter Arm with SplineDescriptionStainless steel shifter lever with spline.The shifter peg mounting hole is threaded to fit 5/16-24. Fits:FX 1981-1986FXDWG 1991-2017FXST...

V-Twin - 21-2021 - Shifter Rod Assembly CadmiumDescriptionShifter rod assembly has a cadmium finish with 2 ball swivel ends. Fits:FXE 1974-1985FX 1974-1985Additional Information

Forward shifter mount bracket and arm kit includes a chrome bracket, inner arm and nylon vibration washers.*NOTE: Accepts FXST style male footpegs. Fits:FXWG 1980-1986FXST 1984-1989Additional...

Male footpeg stud features a zinc finish. Fits:FL 1941-1985FX 1973-1985Additional Information UOM1 - EA

Shift lever bolt kit includes a chrome hex screw washer, chrome acorn nut and nylon washer set.*NOTE: Nylon washer set for use as requires. Fits:FL 1970-1984FX 1980-1999Additional Information

V-Twin - 20-0349 - Pulley Brake Disc Spacer Alloy 1/4 inch ThicknessDescriptionAlloy 1/4" thick pulley and rotor spacer provides offset when required with a 7/16" bolt hole.For spacing out rear...

1-1/2" sprocket pulley spacer is machined with counterbore for positive alignment and features an alloy consturction.This is the 5 hole type to space rear sprocket or pulley for alignment. Fits:XL...

V-Twin - 19-0414 - Pulley Brake Disc Spacer Steel 5/16 inch ThicknessDescriptionSteel 5/16" thick pulley and rotor spacer provides offset when required with a 7/16" bolt hole. The spacer measures...

V-Twin - 19-0413 - Pulley Brake Disc Spacer Steel 1/4 inch ThicknessDescriptionSteel 1/4" thick pulley and rotor spacer provides offset when required with a 7/16" bolt hole. The spacer measures...

V-Twin - 19-0128 - Pulley Brake Disc Spacer Steel 3/16 inch ThicknessDescriptionSteel 3/16" thick pulley and rotor spacer provides offset when required with a 7/16" bolt hole. The spacer measures 2...

Shifter pivot end measures 5/16" x 24. Fits:XL 1975-1976FX 1974-1985Additional Information OEM No.42585-75

2nd gear for countershaft, 24 tooth stock ratio, fits 4- speed Big Twin models. Fits:FXWG 1980-1985FXST 1984-1985FX 1980-1985Additional Information

4-speed transmission rotary top shifter arm features a one piece design.For rotary, cow-pie or maytag, as these transmission tops are referenced on the 4-speed transmission. Fits:FL 1979-1985FX...

Kick starter arm kit features a naturl finish with forged stainless steel offset arm. Kit includes alloy Knucklehead kick starter pedal. Fits:XL 1971-1976FL 1954-1985FX 1971-1985Additional...

2019 New Production replica transmission countershaft 1-2 shifter large clutch gear, fits 4-speed Big Twin models.*NOTE: Large shifter clutch. Fits:UL 1937-1948FXST 1984-1985FX 1980-1985EL...

Wheel hub race removal tool set includes 2 pieces, the race puller and driver.This measures 1-3/4" from the back of the screw to the front bend. Fits:FL 1973-1999FX 1973-1999Additional Information

Pushrod cover hardware kit includes 44 pieces. Fits:FL 1948-1999FX 1972-1999Additional Information UOM1 - KIT

Countershaft o-ring Fits:FXST 1985-1986FX 1985-1986Additional Information OEM No.11166 UOM10

This 41mm fork seal set is molded with factory part number and is sold in pairs. Fits:FLT 1980-1984FL 1977-1983FX 1980-1986Additional Information

V-Twin - 13-1945 - 41mm Fork Lower Damper Tube Spring SetDescriptionFork lower damper tube spring set.Sold as a pair. Fits:FLST 1986-2005FLT 1979-2005FL 1977-1984FXST 1984-2005FX 1980-1986Additional...

Replica chrome kickstand spring is 3-1/2". Spring is manufactured to meet or exceed OEM specifications for long lasting durability and performance. Fits:K 1952-1956FXST 1984-1985FX 1971-1984EL...

Alternator roll pin and Sportster oil pump feed pin. Check factory parts book for more applications. Fits:FL 1970-1984K 1952-1956FXR 1984-1988FX 1971-1984XL 1972-1976 oil pumpFXST 1984-1988XL...

Snap ring used for cam shaft, transmission and shifter arms.This can also be used on cam chain shoe 1999-2006 FLST, FLT & 1999-2005 FXD, inner shifter arm 1974-1984 FX and countershaft gear 1991-up...

Billet lower pushrod cover set features a natural alloy finish. Set fits Evolution models.Sold as a four piece set. Fits:FX 1984-1999FL 1984-1999Additional Information

Evolution Shovelhead rocker box set accepts 1/2" x 20 end plugs. Features a natuarl cast aluminum construction with shot peened finish and cast shape readily accepts a black VHT finish.Allen screws...

Hex type shifter bracket bolt kit has a chrome finish. Fits:FXST 1984-1999FLST 1986-1999FL 1952-1984FX 1980-1986Additional Information

V-Twin - 8716-1T - Inner Fork Tube Plug ChromeDescriptionInner fork tube plug, chrome finish. Fits:FXST 1984-UPFX 1977-1984FLST 1986-UPFX 1980-1986Additional Information

Frame and fork kit includes replica retro rigid 30  rake frame and 32" inline spring fork unit that features chrome front legs, outer springs, rockers and chrome rear leg.*NOTE: There are no serial...

Frame and fork kit inlcudes a replica retro rigid 30  rake frame and 32" inline spring fork assembly that features a black finish.Frame will accept Panhead or Shovelhead engine with 4-speed...

Dry charged 12 volt battery and requires filling with electrolyte acid available from your local auto parts store.Not maintenance free. Battery is shipped dry without acid. Battery is lead/acid type...

Replica 21" x 2.15" single disc front wheel with chrome rim, 40 chrome hub with 3/4" bearing, stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forksNOTE:...

Wheel features a Replica 16" x 3.00 drop center rim, a chrome hub with 3/4" bearings, and polished 40 stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks...