1985

V-Twin - 27-0855 - Driver Chrome Footboard SetDescriptionChrome footboard set is streamliner style.Mounting bracket features 8" spacing. Fits:FLT 1980-UPFLST 1986-UPAdditional Information

Right side footpeg mount block features a raw finish and is for FXR models.Outer primary must accept mid-shift shifter access plate with bushing provision for the shifter shaft. Inner primary must...

Left side footpeg mount block features a raw finish and is for FXR models.Outer primary must accept mid-shift shifter access plate with bushing provision for the shifter shaft. Inner primary must...

V-Twin - 27-0822 - Driver Footboard Set with Wave DesignDescriptionChrome billet footboard set has black molded rubber inserts with a wave design.Mounting bracket features 8" spacing. Fits:FLT...

Kit will move the footboards forward 2" and will leave the stock controls intact. Kit is a 4 piece set, includes all necessary hardware, and has a smooth black finish. Fits:FLT 1983-2008Additional...

Extension kit will move the footboards forward 2" and will leave the stock controls intact. Kit is a 4 piece chrome set and includes all necessary hardware. Fits:FLT 1983-2008Additional Information

V-Twin - 27-0748 - Driver Black Footboard SetDescriptionBlack footboard set is streamliner style.Mounting bracket features 8" spacing. Fits:FLT 1980-UPFLST 1986-UPAdditional Information

Big Twin kickstand assembly features an adjustable leg and hidden spring. Kickstand has a range of 9" to 9-1/2".Mounting is by 3 bolts on the left side front frame boss. ...

Chrome mount bracket is used to mount right male style pegs and brake pedal.*NOTE: For FXR mid control applications. ...

Chrome extension bracket to mount right side male style pegs .*NOTE: Must order footpeg set separately. Fits:FXR 1982-1994Additional Information OEM No.

Chrome extension bracket to mount left side male style pegs.Mount holes measure 1-1/4" center to center. ...

V-Twin - 27-0625 - Mustache Highway Bar Kit with Cats Paw FootpegDescriptionChrome mustache highway bar kit with cats paw foot pegs.The distance from the mounting plate to peg is 10". These bars are...

V-Twin - 27-0570 - Footboard Pad SetDescriptionPads for D-shaped footboards.Mounting bracket features 10" spacing. Fits:FLT 1980-UPFL 1974-1984FLST 1986-UPAdditional Information

V-Twin - 27-0560 - Shifter Peg Kit for Heel-Toe ShifterDescriptionFlame shifter peg kit for use with heel toe shifters. Features chrome flames with rubber accents.Sold as a pair. Fits:FL...

Chrome kickstand mount kit includes kickstand mount, spring, leg stop, and spring plate. Fits:FXST 1985-1999Additional Information UOM1 - KIT

Chrome kickstand tab kit includes washer, acorn nut, and tab . Fits:FXST 1984-1999FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome kickstand kit includes jiffy stand, leg, spring, bracket and bumper stop.All mounting hardware included. Fits:FLHT 1985-2000FLT 1985-2000Additional Information

Kickstand extension kit requires drilling 1/4" hole through kickstand. Fits:FLST 1986-2006FLT 1984-1990FXST 1986-2006Additional Information OEM

Chrome kickstand mount bracket. Fits:FLT 1981-2008Additional Information OEM No.50078-81A UOM1 - EA

Constructed of steel and chrome plated, this adjustable kickstand stop is installed on the kickstand shaft to prevent the leg from banging into the primary case. Fits:FLST 1986-1990UL 1938-1947FXST...

Chrome kickstand spring plate. Fits:FLST 1986-1990UL 1938-1947FXST 1984-1990FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Stop your kickstand from hitting your primary cases by installing this steel leg stop on your kickstand shaft. Fits:FLST 1986-2006FXST 1984-2006FX 1971-1984EL 1936-1940FL 1941-1984Additional...

V-Twin - 27-0406 - Footpeg Male Stud SetDescriptionFootpeg male stud set fits all male footpeg sets on pre-2018 applications.Fits on kick starter pedal, V-Twin #17-0624 Fits:FX 1980-UP...

Zinc mount bracket is used to mount right rear male style pegs and brake pedal.*NOTE: The right rear footboard mount with internal splines to mate to the frame. Fits:FXRP 1982-1994 use with male...

FXRP right rear footboard bracket features a zinc finish. Fits:FXRP 1984-1994Additional Information OEM No.50664-85

Chrome kickstand wedge kit is used for lowering FLT models. Fits:FLT 1981-1984FLHT 1985-2006FLHR 1981-1984FLHS 1985-2006FLHR 1985-2006FLHS 1981-1984FLHT 1981-1984FLT 1985-2006Additional Information

Kickstand shaft washer set installs between the stand and the bracket. Features a zinc plated finish.Used to adjust the height when the stand is attached to the bracket. Fits:FL 1941-1985Additional...

Skeleton foot kickstand features constructed polished stainless steel. End is threaded for hex bolt.May require shim wedge under kickstand mount or washer on shaft. Order spring and lock tab...

V-Twin - 27-0272 - Steel Dimpled Footpeg KitDescriptionSteel dimpled footpeg kit featuress chrome steel pegs and include male adapter blocks with zinc finish.*NOTE: These will not fit passenger on...

Steel construction kickstand mount features a zinc plated finish.Bolts on to replace a broken kickstand mount tab, with cross member strap. Fits:FXR 1982-1994Additional Information

V-Twin - 27-0232 - Black Driver Half Moon Footboard SetDescriptionBlack driver half moon footboard set.Mounting bracket features 8" spacing. Fits:FLT 1980-UPFLST 1986-UPAdditional Information

The 4  wedge allows for a kickstand adjustment when using longer forks on 16", 18", or 21" front wheel and prevents the bike from leaning too far to the left while utilizing the stock kickstand...

Chrome kickstand is 12" in length. Fits:XL 1984-1988Additional Information OEM No.50006-84A UOM1 - EA

Black clutch hand lever assembly includes clamp and bracket. Fits:FXR 1982-1994FXST 1984-1995FL 1982-1984FLST 1986-1995XL 1982-1995FXD 1991-1995Additional Information

Chrome contour hand lever set are designed for easy grip. Fits:FLT 1979-1984FXR 1982-1994FXST 1984-1995FX 1982-1984FL 1982-1984FLST 1986-1995FXD 1991-1995FLT 1985-1995Additional Information

Chrome handlebar master cylinder assembly has a 11/16" bore and utilizes a 12mm banjo fitting for use with a 3/8" x 24 banjo bolt. Master cylinder comes assembled with internals and lever.Order clamp...

Bracket with black clamp. Fits:FXR 1982-1994FXST 1984-1995FL 1982-1984FLST 1986-1995XL 1982-1995FXD 1991-1995Additional Information

Black handlebar master cylinder assembly has a 11/16" bore and utilizes a 10mm banjo fitting for use with a 10mm 7/16" - 24 banjo bolt. Master cylinder comes assembled with internals and lever....

Black handlebar master cylinder assembly has a 3/4" bore, utilizes a 10mm banjo fitting for use with a 10mm 3/8" x 24 banjo bolt. Master cylinder comes assembled with internals, lever and clamp....

Handlebar switch housing includes the upper and lower of the right and left sides housings and includes stainless steel button head screws.Use existing wiring and switches. Housing accepts screw in...