1985

V-Twin - 24-0279 - Triple Tree Top Bearing Adjusting Nut ZincDescriptionZinc bearing adjusting nut for triple tree. Fits:FLT 1980-UPAdditional Information

Zinc bearing adjusting nut for the triple tree Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999Additional Information OEM No.48330-48B

Kit includes a cup set, tapered bearing set, and dust shields for 1" necks.Replaces the existing removable cups to provide a 3  rake when installed. Fits:FX 1971-1984FLH 1949-1984FXST...

Chrome front fork air baffle. Fits:FLT 1980-1999Additional Information OEM No.58520-79TC UOM1 - EA

Lower fork damper tube stop is for Big Twin models.Sold as a pair. Fits:FLST 1986-2006FLT 1979-2005FL 1977-1984FX 1980-1983FXST 1984-2005Additional Information

Fork neck cup and bearing kit has races installed and features a chrome finish. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information

Headlamp cowl kit is chromed ABS plastic and includes the throttle cable hole.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will...

This is a chrome unpolished upper tree stock replacement. Fits:FLT 1980-2008Additional Information OEM No.45435-95

Kit includes lock washer and nut. Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999FX 1980-1986Additional Information OEM No.45718

V-Twin - 24-0186 - Chrome Fork Tube Cap Non-VentedDescriptionFork tube cap is non-vented with a thread size of 5/8" x 18 and has a domed top.Sold as a pair. Fits:FXWG 1980-1986FXST 1984-UPFLST...

Zinc fork stem nutThread is 1"-24. Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999FX 1980-1986Additional Information OEM No.

Set includes damper tubes only. Hardware is not included.Sold as a pair. Fits:FLT 1983-1996Additional Information OEM No.45857-83

Kit includes brackets and adjustable round body damper piston.Overall length of stabilizer measures 14-7/8" and the length to center of eye hole measures 14". Fits:FXST 1984-1999FXSTC...

Fork springs feature high quality and high performance.Springs elminate front end sag, reduce nose dive under braking, improve cornering stability, increase ride comfort and allow forks to utilize...

Progressive wound fork springs feature high quality and high performance.Springs eliminate front end sag, reduce nose dive under braking, improve cornering stability, increase ride comfort and allow...

Nylon fork tube rings is 4 pieces.Set of four. Fits:FLST 1986-2005FLT 1979-2005FL 1977-1984FX 1980-1983FXST 1984-2005Additional Information

Kit includes neck cup bearing, dust cover set, cone cover nut, stem nut and lock washer kit. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information

Zinc fork neck cup set with races installed. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.48311-60

Chrome fork neck cup set with races installed.Sold as a pair. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Feature built in rubber seal where bearing contacts the top of the race. This kit chrome cups and dust shields. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FLH 1949-1984Additional Information

Our lower 41mm fork slider bushings is manufactured to meet OEM specifications for long lasting durability and performance.Set of two. Fits:FXST 1984-2010FLT 1984-2013FLST 1986-2017Additional...

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Chrome triple tree lower without lock tab features a 3  rake built in. Fits:FXST 1984-1999FXWG 1980-1986Additional Information UOM1 - EA

Fork tubes are 20-7/8" stock length.Before installing, compare old and new tubes. Be sure the stock top plugs thread into the new fork tubes. Sold as a pair. *NOTE:...

Fork tubes are 24-1/4" stock length.Tube set is stock FXST length but would be an extended length if used on FLST. Set of two. Before installing, compare old and new tubes. Be sure the stock top plug...

V-Twin - 24-0011 - Fork Drain ScrewsDescriptionFork drain screws are supplied with washers and are sold in pairs. Fits:FL 1976-1984FLST 1986-2005FLT 1979-UPFXST 1984-2005Additional Information

Accepts 41mm fork tubes. Fits:FXWG 1980-1986FXST 1984-1988Additional Information OEM No.45672-80 UOM<

Black 41mm adjustable triple tree kit includes fork plugs, lower adjustable tree and top tree with pivot bolts. Kit features 2 adjustable positions with a 12" rake in the raked position.Lower triple...

Set accepts 41mm fork tubes. Bottom tree features built in rake and rounded edges. Fork lock tab is welded to the lower tree.Spacing of the fork legs is 10" center to center. Fits:FXST 1984-1987FX...

Rear caliper assembly features a black finish. Girling type caliper for left side mounting on Sportster models.Brake line enters forward hole and rear hole is for breather fitting. Kit includes...

Vibration shim for rear brake pad.Sold as a pair. Fits:FX 1982-1984FL 1982-1984XL 1982-1986FXR 1984-1986Additional Information OE

V-Twin - 23-9173 - Brake Rod Plunger EndDescriptionZinc brake rod plunger end. Fits:FXR 1987-1994 Late 1987XL 1987-UPFXR 1982-1987 Early 1982Additional Information

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

Rear brake master cylinder reservoir features a die-cast aluminum construction with ribbed accents and the sight glass installed in an black finish.Accepts OEM style cover, gasket and mounting...

Brake pedal plunger with a zinc finish. Fits:FXR 1982-1986XL 1982-1986Additional Information OEM No.42448-82A

Rear brake pedal plunger end only. Fits:XL 1980-1986Additional Information OEM No.42445-80A UOM1 - EA