1985

Replica 21" x 2.15" single disc front wheel with chrome rim, 40 chrome hub with 3/4" bearing, stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forksNOTE:...

Wheel features a Replica 16" x 3.00 drop center rim, a chrome hub with 3/4" bearings, and polished 40 stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks...

16" X 3.00" wheel assembly features chrome rim, 40 polished stainless steel spokes, chrome hub with internals.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Wheel and caliper kit includes a chrome wheel assembly, chrome caliper, chrome 51 tooth sprocket, rear drilled disc, bolts, chrome caliper bracket, support spring, and chrome stay bar with bolts...

Features a Replica 21" x 3.25" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forksNOTE: All spokes on wheel...

Features a Replica 23" x 3.00" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.If you would like your bike to shine this spring and give it a new life, check out our chrome 23" x 3...

21" x 3.25" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

V-Twin - 52-0301 - 19 inch X 2.50 inch Wheel Rim and Spoke Kit ChromeDescriptionRim and spoke set include 19" x 2.50" front rim with 40 chrome spokes with 40 spoke nipples.Rim is steel and drop...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

21" x 2.15" Replica single disc front wheel features a chrome hub with internal bearings installed, 40 stainless steel spokes, and a chrome rim.**NOTE: All spokes on wheel need to be inspected and...

19" x 2.50" Replica single disc front wheel features a chrome hub with all internal bearings installed, 40 polished stainless steel spokes and a chrome drop center rim.**NOTE: All spokes on wheel...

21" x 2.15" Replica single disc front wheel features a chrome hub with all internal bearings installed, chrome spokes, and a chrome rimAll spokes on wheel need to be inspected and re-torqued after...

19" x 2.50" Replica single disc front wheel features a chrome hub with all internal bearings installed, 40 chrome spokes, and a drop center chrome rimFeatures a 3/4" bearing. **NOTE: All spokes on...

Wheel features a 16" x 3" chrome drop center rim with a small center valve stem hole, a chrome hub with internals and 40 chrome twirled spokes.Wheel is lace and trued. ...

Wheel features a Replica 16" x 3.00 chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks. This wheel has a side...

21" x 2.15" Replica single or dual disc front wheel features chrome hub with all internal bearings installed, 40 chrome spokes, and a chrome rim.**NOTE: All spokes on wheel need to be inspected and...

19" x 2.50" Replica single or dual disc front wheel features a chrome hub with bearings installed, chrome spokes, and a chrome drop center rim.**NOTE: All spokes on wheel need to be inspected and...

Features a Replica 21" x 2.15" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Rim has a rolled edge design for added strength. Single disc wheel is assembled and ready to directly...

Wheel features 16" X 3.00" chrome rim, chrome hub with internals, and 40 chrome spokes, assembled.Includes snap ring. **NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles...

Front 16" x 3.5" Duro 26 Fat Spoke wheel features a matte black finish and 25mm bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Front 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 3/4" bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

200 XL rigid frame features a 40  rake with a 3" stretch in front legs to accept a 1-1/8" belt with 200 series tire.Frame has kickstand tab and battery box mount welded in place. Accepts a right side...

Engine mount shim is used to raise motor for front or rear clearance, when necessary.Sold in a pack of 5. Fits:FL 1941-1999EL 1936-1952Additional Information

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

Chrome left and right pivot mount end caps with footpeg mount holes.The OEM number for the right end cap is 50589-93, and the OEM number for the left end cap is 50588-93. Fits:FLT 1982-1984FLT...

Engine bar features 1-1/4" tubing.This engine bar is not for use with extended forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Engine bar features 1-1/4" tubing and foot rests with rubber pads. Hardware is not included. This will not work with forward controls.**WARNING: This engine/frame bar may provide limited leg and...

Engine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide)...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original...

Big Twin neck forgings machined to accept stock diameter tubing with 30  rake.Includes key lock tab and right hand number boss forged in neck. *NOTE: This frame neck does not include Manufacturer's...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount...

V-Twin - 51-0484 - XL Hardtail Axle Plate SetDescriptionRaw set of right and left axle plates for Sportster hardtails, features 7/8" slots on both sides. Fits:XL 1982-UPAdditional Information<

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

FXR weld on top motor mount features a raw finish and is . for use on frame.Must be welded in place on FXRT and FLT models. Fits:FXR 1982-1990FLT 1980-1990Additional Information <

Top beaded windshield measure 18" and is for use on fiberglass fairings only.Fits 1969-1984 FLH 4 speed and 1980-1985 FLT 5 speed models with Batwing fairings. Fits:FLT 1980-1985FLH...

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA