Super Glide Low Rider FXRS

FXR exhaust mount bracket. FXR exhaust mount bracket is mounted with (2) 7/16-20x1* pivot bolt cap screws. Our bracket mounting block can be bolted on to the opposing side using (2) 5/16-24x 5/8...

Battery strap clamp for FXR models features a black finish. Includes nut that is welded in place. Use with 1/4 x 20 bolt 1-1/2 inch hex head and 1/4 x 20 jam nut. Fitment: FXR 1984-1988 FXR 1990-1994

Rear exhaust bracket is zinc plated and for use with FXR models. *NOTE: Must order additional hardware: 5/16 inch x 3/4 inch x 1 inch spacer 5/16 inch-18 x 2 inch and 5/16 inch-18 x 1-3/4 inch allen...

FXR pipe bracket kit includes a raw weld on type bracket and an ISO mount block. *NOTE: Bracket must be welded on. Fitment: FXR 1982-1994

Silver dash panel decal set. Sold as a 2 piece set. Fitment: FXR 1982-1994

Sold as a pair. Fitment: FXR 1982-1994

Rear axle adjuster has a 3/4 inch inner diameter and includes heavy pull blocks and two 1/4 inch-20 x 2 inch full thread allen cap screws. Fitment: FXR 1982-1994

Side cover for a 5-speed transmission clutch features a black finish. Fitment: FXR 1987-1994

WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR brake plunger kit is a three piece kit that includes a plunger rod end brake plunger end and hex nut in a zinc finish. Fitment: FXR 1987-1994

FXR shifter shaft bushing includes 4 o-ring alloy type with two bronze bushings on each end. Sleeve is used to replace the stock plastic part. Fitment: FXR 1984-1994

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

2023 New Production black kickstand is stock length and includes pin for FXR models. Fitment: FXR 1982-1990

FXR frame side cover set is constructed of black ABS plastic with vented panels. Sold as a pair. Requires (4) 1/4 inch-20 x 1-3/4 inch allen bolts and (4) 1/4 inch flat washers. Tech Notes: Required...

Axle spacer front for the right side and has an overall length of 1/2 inch. Measurements: Inner Diameter: 3/4 inches Fitment: FXD 1991-1996 FXR 1984-1994 XL 1986-2025

This replaces the original plastic unit on the 1982-up models. Thread is 3/8 inch x 28 TPI. Holes on the back measure starting with the small one closest to the bottom and working to up: #8-32* 5/16...

Pro-One - Solid Riser Bushing Kit Features: CNC-machined from billet aluminum Removes handlebar slop associated with tall risers and handlebar setups

Pro-One - Steering Stem Bolt fits '99-'05 FXD & '88-'22 Sportster Models (Except RH Sportster) Features: Replaces stock steering stem hardware Note: Replacement for Pro-One Triple Tree...

James Gaskets - JGI-18633-48-KF - Tappet Block Gasket - Fits '48-'99 Big Twin Models (.020” Foamet®) - Pair Fits: '48-'99 Big Twin Models (.020” Foamet®). Full year/model list is on the Fitment tab...

James Gaskets - JGI-16779-99-X - 1 Piece Lower Rocker Housing Gasket - Fits '86-'22 Sportster Models (Except RH Sportster - Pair Fits: '86-'22 Sportster Models (Except RH Sportster. Full year/model...

James Gaskets - JGI-16777-94-S - 3.625" Big Bore Metal Base Gasket - Fits '84-'99 Evolution Big Twin Models - Pair Fits: '84-'99 Evolution Big Twin Models. Full year/model list is on the Fitment tab...

James Gasket - 39 mm Fork Seals fits '99-'05 Dyna, 'L87-'22 Sportster Models (Except RH Sportster (OEM #45378-87)) Features: High-quality replacement components Available in dealer packs of ten...

James Gaskets - JGI-16777-96-X - 4.000" S&S Cylinders Front/Rear Metal Base Gasket - Fits '84-'99 Evolution Models - Pair Fits: '84-'99 Evolution Models. Full year/model list is on the Fitment tab. 4...

James Gaskets - JGI-25225-70-XM - 0.036” Cam Cover Gasket - Fits '70-'92 Big Twin Models (Metal Core, Paper Facing w/ Silicone Fits: '70-'92 Big Twin Models (Metal Core, Paper Facing w/ Silicone...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM...

James Gasket - EVO Top End Gasket Kit fits '84-'91 Big Twin Models (OEM #17033-83) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine

James Gaskets - JGI-25416-70-DL - Clutch Cover Seal Kit - Fits '70-'98 Big Twin Models Fits: '70-'98 Big Twin Models. Full year/model list is on the Fitment tab. Clutch Cover Seal Kit from James...

James Gaskets - JGI-25416-85-K - Clutch/Inspection Cover Seal Kit - Fits '85-'98 Touring & FXR Models Fits: '85-'98 Touring & FXR Models. Full year/model list is on the Fitment tab. Clutch/Inspection...

James Gasket - Transmission Gasket Kit fits '80-'99 Big Twin Models 5-Speed w/o Integral Oil Tank (OEM #33031-85) Features: Made in the U.S.A.

James Gaskets - JGI-17035-83-B - 80” Motor Gasket Kit with Metal - Fits '84-'91 Evolution Models (Metal Base and Rocker Cover Gaskets Fits: '84-'91 Evolution Models (Metal Base and Rocker Cover...

James Gaskets - JGI-17033-83-A - Top End Gasket Kit - Fits '84-'91 Big Twin Models (Rubber Rocker Gaskets/.045” Head Gaskets Fits: '84-'91 Big Twin Models (Rubber Rocker Gaskets/.045” Head Gaskets...

James Gaskets - JGI-25225-70-K - Cam Change Gasket Kit - Fits '70-'92 Big Twin Models Fits: '70-'92 Big Twin Models. Full year/model list is on the Fitment tab. Cam Change Gasket Kit from James...

James Gasket - Top End Gasket Kit fits '84-'91 Big Twin (Cork Rocker Gaskets (OEM #17033-83)) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine

James Gaskets - JGI-81-FL - Mylar® Gasket/Seal Kit - Fits '84-'91 Evolution Big Twin & '81-'84 Shovelhead Models Fits: '84-'91 Evolution Big Twin & '81-'84 Shovelhead Models. Full year/model list is...

James Gaskets - JGI-16770-84-S - Big Bore Kit with Black PTFE Head Gasket - Fits '84-'99 Evolution Big Twin Models (.045” Black PTFE Head Gaskets) Fits: '84-'99 Evolution Big Twin Models (.045” Black...

James Gasket - Transmission Seal Kit fits '84-'93 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Mad

James Gaskets - JGI-17033-83-S - 80" Top End Gasket Kit - Fits '84-'91 Evolution Models (3-5/8" Big Bore) Fits: '84-'91 Evolution Models (3-5/8" Big Bore). Full year/model list is on the Fitment tab...

James Gaskets - JGI-17042-92-SS - Rocker Cover Kit Gasket - Fits '84-'99 S&S Evolution Models Fits: '84-'99 S&S Evolution Models. Full year/model list is on the Fitment tab. Rocker Cover Kit Gasket...