Sportster XLH 883 Standard

Speedometer Cable is one of those essential parts if you want your speedometer to work. This speedometer cable is 41" long with 16mm nut.Cable also has an elbow formed in it where the speedometer is...

V-Twin - 36-0882 - Black Throttle Cable with 90  Elbow FittingDescriptionBlack throttle cable has a 90  elbow fitting. This cable has a casing length of 41" which is 8" over stock.Throttle with 90 ...

Stainless steel braided with a clear coat throttle, idle cable set with 90  elbow fittings. The casing length on the throttle and idle cable is 41-1/2" and is 8" over stock.The curved ends are...

Braided stainless steel throttle and idle cable has a 34" casing. Throttle cable is 39.375" overall length. Idle cable is 38.625" overall length. Fits:XL 1990-1995FXST 1990-1995FXD 1980-1995FXSTC...

V-Twin - 36-0809 - Choke Cable Assembly KitDescriptionChoke cable assembly kit with the CV carburetor top mount bracket to relocate the choke assembly cable, includes the knob, casing and inner wire...

Left side speedometer drive is for a speedometer with a 2240:60 ratio.Speedometer drive unit has an .750 axle hole, and includes a .361 wide spacer with an overall length of .940. Fits:FXR...

V-Twin - 36-0555 - Carburetor Choke Knob Insert PolishedDescriptionCarburetor choke knob insert is polished stainless steel. Fits:XL 1988-UPFXST 1990-UPFLT 1993-2006FXD 1993-2017FLST 1990-UPFXR...

Natural alloy petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Natural alloy petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Intake manifold is of cast alloy and spigot type. Fits:XL 1988-2003 EvolutionAdditional Information OEM No.27004-88A

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...

Intake manifold coupler clamp set. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

CV carburetor main jet assortment for the Kinetic-Karb tuner kit includes 5 of each jet from 1.40-2.05 in increments of .05.Jets are for use in stock CV carburetors or in combination with the...

Kinetic-Karb CV carburetor tuner kit is for Keihin constant velocity carburetors to permit easy tuning after installation of custom air cleaners, cams, and exhaust for cabureted models.Carburetor...

Intake manifold for Evolution models converts stock rubber compliance fittings to a more rigid mount system. Manifold will accept S&S CV or other aftermarket carburetor.Manifold is for use with 883cc...

Chrome intake manifold flange set. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

V-Twin - 35-3007 - Anderson Twist Grip Assembly ChromeDescriptionDual cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with a...

V-Twin - 35-3004 - Anderson Twist Grip Assembly BlackDescriptionSingle cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with...

Stainless CV idle adjustment screw with a brass knurled knob. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA

XL 47mm OKO shorty carburetor kit includes Tourist Trophy old style air snoot. Kit does not include filter. Fits:XL 1986-2006Additional Information UOM1

V-Twin - 35-1881 - 40mm CV Carburetor BlackDescription40mm CV carburetor features a black finish and includes brass fuel fitting and dual cable bracket.Includes 1.6 main jet and 0.42 slow jet. ...

Friction spring throttle tension screw fits 1974-2022 with single or dual throttle.Sold in a pack of 10. Fits:XL 1974-2022FXR 1982-1994FL 1974-1984FX 1974-1984FXD 1991-2017FLST 1986-2017FXST...

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

V-Twin - 35-1724 - CV Carburetor Manifold AdapterDescriptionCV carburetor manifold adapter accepts original 40mm CV intake manifold seals. Adapter features a natural aluminum finish.*NOTE: The...

Black CV carburetor top with choke bracket built in. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA

CV carburetor choke cable kit features cable with knob, mount bracket, screws and hardware. Fits:FX 1993-2006XL 1988-2006Additional Information UOM<

40mm Sportster CV carburetor kit includes a 40mm CV carburetor with a natural finish, manifold and sealing flanges.. Fits:XL 1988-2003Additional Information

Black dual cable assembly with nylon tube and adjuster installed. Fits:XL 1981-1996FXE 1981-1996Additional Information UOM1 - EA

CV carburetor mixture screw with spring is for all 40mm CV carburetors. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA

Alloy kit includes a natural 47mm shorty OKO carburetor, push-pull cable type, one piece manifold, with mount flanges and a round mesh air cleaner.Carburetor is OKO brand, Osaka-Keihin-Okzaki...

40mm CV carburetor features a black finish and is without accessories.The main jet installed is #190. Carburetor includes bracket for dual push-pull throttle...

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional...

V-Twin - 35-0892 - 1/4 inch Turn Throttle KitDescription1/4" turn throttle kit includes a 60" cable, hillclimber grip set and a 1" handlebar throttle assembly. Fits:FL 1976-1996XL 1976-1996FX...

Kit includes brass jets and instructions designed specifically for each model listed. The kit features "No Drilling" installation and will work on stock to heavily modified engines. Fits:XL...

Kit includes brass jets and instructions designed specifically for each model listed. The kit features "No Drilling" installation and will work on stock to heavily modified engines. Fits:XL...

40mm bare CV carburetor is an accurate reproduction of the venerable Keihin CV carburetor and features a natural finish body and silver top. Shipped complete as pictured.Carburetor includes bracket...

V-Twin - 35-0696 - 38mm OKO Flatslide Carburetor KitDescriptionFull kit includes 38mm OKO flatslide carburetor with built in choke activator, throttle cable, twist grip set, manifold and spigot...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

V-Twin - 35-0684 - Handlebar Throttle Adjuster Knob ChromeDescriptionChrome handlebar throttle adjuster knob attaches to the stock throttle lock. Fits:FXD 1991-2017FLST 1986-2017FXST 1984-2017XL...