1990

Shifter shaft and bushing kit. Fits:FLT 1985-2000FL 1985-2000Additional Information UOM1 - KIT Manufa

V-Twin - 21-0256 - Extended Shifter Lever ChromeDescriptionThis shifter lever is extended and measures 9-3/4" long for extended reach. Lever is constructed of steel and has a chrome finish.This...

V-Twin - 21-0249 - Shifter Rod with Ball Joints Ends 12 inch ChromeDescription12" shifter rod with ball joints features a chrome finish for 5 and 6 speed models. Fits:FLH 1980-UPFLT 1980-UPAdditional...

Chrome billet shifter lever. Fits:FXDWG 1991-2017FXST 1990-2017Additional Information OEM No.34616-02

Chrome billet left side shifter spacer has 3 holes and is a 1/2" thick. Fits:FXST 1984-1999Additional Information UOM1 - EA

Jocky shift assembly includes bracket to mount to the top motor mount where coil would mount and features a billet construction.Check hole spacing of two holes (1" center to center spacing). Thread...

V-Twin - 21-0117 - Jockey Cable End BushingDescriptionJockey cable end bushing. Fits:FLSTS 2000-UPFLST 1986-UPFXST 1986-UPFXSTS 2000-UPAdditional Information

V-Twin - 21-0107 - Shifter Collar Long with WasherDescriptionLong shifter collar with washer is used to eliminate the heel shifter or for use on single shifter models. Fits:FLT 1979-UPAdditional...

V-Twin - 21-0106 - Shifter Seal CollarDescriptionShifter seal collar for use with heel/toe shifters. Fits:FLT 1979-UPAdditional Information

Chrome shifter mount bracket features footpeg boss as an integral part of the shift plate. Fits:FXST 1990-1999Additional Information OEM No.33683-90A

Jockey shifter 5 piece kit features a chrome finish and is for 1941-1984 Big Twin frames.Kit includes shaft, arm, lever, bracket and peg hardware. *NOTE: Order related linkage or cables, as required...

Jockey shifter 5 piece kit features a black finish and is for 1941-1984 Big Twin frames.Kit includes shaft, arm, lever, bracket and peg hardware. *NOTE: Order related linkage...

Stainless steel foot shifter lever for shifter control assembly. Fits:FLST 1986-1999FX 1971-1984FL 1952-1985FXST 1986-1999Additional Information

Stainless steel foot shifter plate for shifter control assembly. Fits:FLST 1986-1999FX 1971-1984FL 1952-1985FXST 1986-1999Additional Information

V-Twin - 21-0072 - Slotted Shifter LeverDescriptionSlotted shifter lever is made of forged steel and features a chrome finish.Use for front or rear shifter. Fits:FLT 1983-UPFLST 1986-UPAdditional...

V-Twin - 21-0055 - Black Heel Toe Shifter Lever SetDescriptionBlack heel toe shifter lever set. Fits:FLT 1986-UPAdditional Information

V-Twin - 21-0050 - Chrome Heel Toe Shifter Lever SetDescriptionChrome heel toe shifter lever set.*NOTE: Does not include pinch bolts, must order separately.

V-Twin - 21-0035 - Extended Heel Toe Shifter Lever Set BlackDescriptionBlack heel toe shifter lever set measures 1.0" longer than standard levers, separating the distance between the heel/toe shift...

V-Twin - 21-0002 - Extended Heel Toe Shifter Lever Set ChromeDescriptionExtended heel toe shifter lever set measures 1.0" longer than standard levers, separating the distance between the heel/toe...

Hex flange sprocket nut features a 2-1/2" outer diameter with a black finish.*NOTE: Fits sprockets with "3" set screw holes. Installation may only allow 2 out of the 3 holes in the sprocket to be...

1-1/2" sprocket pulley spacer is machined with counterbore for positive alignment and features an alloy consturction.This is the 5 hole type to space rear sprocket or pulley for alignment. Fits:XL...

V-Twin - 19-0691 - Rear Sprocket Flat Black 48 ToothDescription5-Spoke rear flat sprocket with a black finish. Sprocket is 48 tooth. Fits:XL 1982-1999Custom applicationAdditional Information

York compensator sprocket kit includes 24 tooth sprocket. Fits:FLST 1986-2006FXST 1984-2006FLT 1980-2006FL 1980-1984FXD 1991-2006FXR 1984-1994FX 1980-1984Additional Information

York compensator sprocket kit includes 25 tooth sprocket. Fits:FLST 1986-2006FXST 1984-2006FLT 1980-2006FL 1980-1984FXD 1991-2006FXR 1984-1994FX 1980-1984Additional Information

Direct bolt on 24 tooth solid sprocket for the elimination of the compensator sprocket assembly. Includes nut and washer.Eliminates slippage and noise from compensator. It replaces your failing stock...

48 tooth flat rear sprocket features a black finish.. Fits:XL 1982-1992Additional Information OEM No.41470-86

24 tooth compensator kit. Fits:FXR 1985-1990FLT 1985-1990Additional Information UOM1 - KIT Manufactur

Clutch outer spring seat. Fits:XL 1986-1990Additional Information OEM No.36796-84 UOM1 - EA

Internal clutch retaining ring. Fits:FXD 1991-2003FXST 1990-1999FXR 1991-1994FLST 1990-1999FLT 1990-1999Additional Information

Clutch adjuster screw. Fits:FLST 1986-1990FXST 1985-1990FXR 1985-1990FLT 1985-1990Additional Information UOM1 - EA

Primary Chain Shoe Carrier Fits:XL 1977-1990Additional Information OEM No.39973-86 UOM1 - EA

Primary Chain Adjuster Screw Fits:XL 1977-1990Additional Information OEM No.3250 UOM1 - EA

Chain tensioner plate Fits:FXD 1991-2000FXST 1984-2000FL 1965-1984FX 1971-1984FLST 1986-2000FXR 1984-1994FLT 1984-2000Additional Information

Clutch release inner ramp. Fits:FLT 1987-1999FXD 1991-1999FXR 1987-1994FLST 1987-1999FXST 1987-1999 5 speedAdditional Information

V-Twin - 18-0824 - Tamer Clutch Release KitDescriptionTamer clutch release kit includes the ramp, balls and gasket. Fits:FLST 1986-UPFXST 1986-UPFLT 1986-UPAdditional Information

York throw out bearing upgrade kit is for Big Twins. Kit includes throw out bearing, thrust washers and clutch release kit. Fits:FLT 1987-1999FLST 1987-1999FXST 1987-1999FXD 1987-1999Additional...

Tamer clutch ramp kit includes a 2 piece ramp assembly and related components. Fits:XL 1986-1993Additional Information UOM1 - KIT

V-Twin - 18-0516 - Tamer Clutch Release KitDescriptionTamer Power clutch release kit. Fits:FLST 1986-UPFXST 1986-UPFLT 1986-UPAdditional Information

Tamer clutch ramp assembly for easy lever pull. Replaces OEM inner and outer ramp assemblies and related components.40% easier clutch lever operation. Easy to install; no drilling or spacers needed...

Primary chain drive system is 76 link and features chain shoe adjuster assembly, clutch drum basket with starter ring gear, steel and fiber clutch plates with pressure plate assembly.Primary chain...