1990

Evolution rocker box cover d-ring set features an alloy natural finish.Sold as a pair. Fits:FLH 1984-1991FLST 1984-1991Additional Information UOM

1270cc/1200cc piston kit with rings and wrist pins.**NOTE: Run engine at moderate speeds for at least 500 miles, avoiding excessive running in lower gears, in order to properly break-in new pistons...

Replica 80" front or rear Evolution cylinder is sold each. Cylinder has a natural finish.Piston and rings are not included. Fits:FXST 1984-1998FLT 1984-1998FXD 1991-1998FXR 1984-1994FLST...

Big bore cylinder kit for 1200-1270cc conversion on Sportster models.Increase your horsepower with our V-Twin 1270cc big bore conversion kit. Our kit includes 2 black highlighter finished cylinders,...

Big bore cylinder kit for 1200-1270cc conversion on Sportster models. Kit includes head gasket and has a compression ratio of 10.1.Increase your horsepower with our V-Twin 1270cc big bore conversion...

Billet lower pushrod cover set features a natural alloy finish. Set fits Evolution models.Sold as a four piece set. Fits:FX 1984-1999FL 1984-1999Additional Information

V-Twin - 11-0571 - Rocker Arm Shaft SetDescriptionSifton rocker arm 4 piece shaft set for 1986-up. Fits:FLT 1984-2016FXD 1991-2017XL 1986-UPFLST 1986-2017FXST 1984-2017FXR 1984-1994Additional...

Evolution Shovelhead rocker box set accepts 1/2" x 20 end plugs. Features a natuarl cast aluminum construction with shot peened finish and cast shape readily accepts a black VHT finish.Allen screws...

Alloy lifter block set for Evolution engines. Fits:FLT 1985-1999FLST 1985-1999FXST 1985-1999Additional Information UOM1 - SET

Includes new rods, 2 hole crank pin, nuts, copper plated steel cages and standard rollers fitted and assembled.Piston pin bushings are installed and must be honed for stock wrist pin. Fits:FXST...

Evolution cam cover trim feature an alloy construction. Bolts to stock cam cover on 1986-99 Big Twin models to give the early Shovelhead Flatside style, cover is natural cast for original style...

Bolt-on 8-finned cam cover Kit for Evolution models to give it a Retro-style Panhead look!Kit includes a chrome 8-finned cam cover with bushings installed, cast aluminum cam cover adapter trim and...

Cam cover trim kit features the bolt on retro look in an die cast finish.Kit includes a die cast 8-finned cam cover with bushings installed, cast aluminum cam cover adapter trim and cadmium cam cover...

Bolt-on 4-finned cam cover kit for Evolution models to give it a Retro-style Panhead look!Kit includes a chrome forged aluminum 4-finned cam cover with bushings installed, cast aluminum cam cover...

Bolt-on cam cover kit for Evolution models to give it the Retro-style 1965 Panhead look.Kit includes a replica cast cam cover flatstide style with bushings installed, cast aluminum cam cover adapter...

Cast aluminum cam cover dress up adapter trim allows use of the early retro-style Panhead cam cover to fit Evolution models.Mounts to existing nose cone cover. *NOTE: Actual cam cover not included...

Assembly includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.Piston pin bushings are installed and honed for stock wrist pin. Fits:XL 1986-1999Additional Information

V-Twin - 9751-11T - Cam Cover Screw Kit Allen TypeDescriptionAllen type screw kit for the cam cover. Fits:XL 1986-UPAdditional Information

Sprocket cover master cylinder mount kit with allen type screws. Fits:XL 1986-2003Additional Information UOM1 - EA

Allen type primary cover screw kit with a chrome finish. Fits:XL 1986-1990Additional Information UOM1 - KIT Ma

Oil pump check and relief valve plug with a chrome finish. Fits:FLT 1981-1998FXST 1984-1998FXR 1982-1994FXD 1991-1998FL 1981-1984FLST 1986-1998FX 1981-1984Additional Information

Hex type shifter bracket bolt kit with a parkerized finish. Fits:FXST 1984-1999FLT 1980-1986FXR 1982-1994FLST 1986-1999FX 1971-1984FL 1936-1984Additional Information

Hex type shifter bracket bolt kit has a chrome finish. Fits:FXST 1984-1999FLST 1986-1999FL 1952-1984FX 1980-1986Additional Information

Chrome allen style screw kit for primary covers. Fits:FXD 1991-2005FLST 1989-2006FXST 1989-2006Additional Information UOM1 - KIT

Chrome allen screw kit for primary cover. Fits:FLT 1985-1999FXR 1985-1994Additional Information UOM1 - KIT

Transmission side cover allen screw. Fits:FXD 1991-2005FLST 1987-2006FLHR 1998-1998FXST 1987-2006Additional Information UOM1 -

Transmission shifter cover screw, allen type. Fits:FLT 1987-1999FXR 1987-1994FLST 1987-1999FXST 1987-1999Additional Information UOM

Stianless steel 12 point sprocket bolt and nut kit with washer head, features a 7/16"-20 x 1-1/4" thread. Fits:FX 1973-1984 cast or wire wheelFL 1973-1984 cast or wire wheelXL 1973-1990 cast or wire...

V-Twin - 8794-10T - Chrome Front Brake Disc Bolt Set Description Chrome allen bolts and nuts for front brake disc. Set includes 5 bolts and 5 nuts.5 piece kit. Fits: FXST 1984-UP FXDWG 1991-2017...

Rear disc tapered screw set includes 5 screws and 5 nuts. Fits: XL 1979-1991 FL 1981-1984 FLST 1986-1991 FX 1981-1984 FXST 1984-1991 Additional Information

V-Twin - 8716-1T - Inner Fork Tube Plug ChromeDescriptionInner fork tube plug, chrome finish. Fits:FXST 1984-UPFX 1977-1984FLST 1986-UPFX 1980-1986Additional Information

V-Twin - 8233-1T - Chrome Flat Top Fork Tube BoltDescriptionFork tube bolt with flat top and chrome finish. Fits:FXD 1991-2005FXST 1984-UPFLST 1986-UPFL 1977-1984Additional Information

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

Oil pump mount set features allen style screws.Includes (4) 1/4"-20 x 2-1/2" and (2) 1/4"-20 x 2-3/4" screws. *NOTE: When mounting oil pump mount set to V-Twin engine cases, it does not require a...

Chrome fender strut with three holes. Fits:FLST 1986-1999Additional Information UOM1 - SET Manufacturer

Rear engine mount cover. Fits:FXR 1987-1995FLT 1987-1995Additional Information UOM1 - EA Manufacturer

Full lowering kit includes components to lower the front and rear of a Softail model.Full lowering kit includes shorter damper rods, 1" shorter kickstand and adjustable rear shock lowering set. The...

Lower shock stud kit includes 2 nugget nuts and 2 studs. Fits:FXRS 1982-1994FXR 1982-1994Additional Information OEM No.1614

V-Twin - 54-0421 - Chrome Shock Stud Washers 1/2 inch HoleDescriptionChrome 1/2" hole x 1" flat shock stud washers Fits:FLT 1997-UPFXR 1982-1994FL 1965-1984FX 1971-1984XL 1975-UPFXD...

Shocks are black and adjustable and can lower your bike up to 1.5". Now with these shocks you can lower your bike for the look you want or the height you need.The center to center from eye to eye...