1990

D+D XL raw rigid frame features a 1-1/4" thick wall, DOM steel tubing with 1-1/2" backbones, 30  rake and 0  stretch. This rigid frame is a basic starter frame.Frame will require custom 3/4" rear...

Big Twin neck forgings machined to accept stock diameter tubing with 30  rake.Includes key lock tab and right hand number boss forged in neck. *NOTE: This frame neck does not include Manufacturer's...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount...

V-Twin - 51-0484 - XL Hardtail Axle Plate SetDescriptionRaw set of right and left axle plates for Sportster hardtails, features 7/8" slots on both sides. Fits:XL 1982-UPAdditional Information<

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

Softail top frame plate features a raw steel finish, to match with seat area plate on 1986-1999 Softail original frames.For Hardtail installation. *NOTE: Align with the (2) 1/4" holes in plates. ...

FXR weld on top motor mount features a raw finish and is . for use on frame.Must be welded in place on FXRT and FLT models. Fits:FXR 1982-1990FLT 1980-1990Additional Information <

Beaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes altogether. Fits:FLT 1987-2010Additional...

Fork stem lock tab replace broken, bent or missing on stock lower triple trees, to be welded on. Fits:FLST 1987-1999Additional Information UOM1 - EA

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

V-Twin - 51-0066 - Frame Motor Mount Tab RawDescriptionFrame motor mount tab must be welded on and features raw casting. Fits:XL 1982-UPAdditional Information

Rear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rigid frame neck is for the XL single loop rigid bobber frames. Fits:XL 1986-2003Additional Information UOM1 - EA

Rear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA <

V-Twin - 50-1910 - Sissy Bar Detachable Side Plates BlackDescriptionGloss black detachable side plates for easily adding or removing detachable accessories. Fits:FXST 1984-1999FLST 1986-1999 Except...

Fender tip set features a front and rear tip in a smooth style.Some drilling may be required for installation. Fits:FLSTF 1990-2006Additional Information OE

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Chrome front fender mount kit attaches fender to original style assembly. Fits:FLST 1986-1999Additional Information UOM1 - KIT

Chrome front fender mount kit attaches fender to original style assembly. Fits:FXST 1984-1993Additional Information UOM1 - KIT

Rear fender bumper without grill. Fits:FLST 1986-1999Additional Information UOM1 - EA ManufacturerV-T

Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. ...

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Rear fender kit includes steel fender, Replica chrome struts , chrome license plate bracket, and tail lamp with hardware.We suggest pre fitting the fender prior to painting. ...

Rear shorty fender features a primer finish. For Softail models.Fender does not includes tail lamp mount. Fits:FLST 1986-1999FXST 1986-1999Additional Information

Drag Specialties - DS380068 - OE Rear Fender - Raw Steel - '90-'95 FLSTFFeaturesAn exact steel replacementPre-drilled holes for fender struts, taillight and license plate mountReplacement Part for...

Drag Specialties - DS280219 - 8-1/4" Turn Signal Bracket - '85-'90 FLTFeaturesMounting brackets are 4-3/4" shorter than stock bracketsGive the rear of the bike a sleeker look; uses stock mounting...

Drag Specialties - DS243884 - FL-'62-'67 Style 2240:60 Speedometer - Black/White FaceFeaturesQuality 5” speedometer heads are available in 2240:60 ratiosFeatures 12 mm thread and comes with a...

Drag Specialties - 78050015 - Clutch Pushrod End - Big TwinFeaturesStamped steel constructionIncludes oil slingerFor use with mechanical clutchesReplacement Part for OEM Number(s):3706990Specs

Drag Specialties - 78050012 - Regulator Cover - Chrome - '89-'99 FXST/FLSTFeaturesStamped steel cover fits over the existing regulatorIncludes chrome mounting hardwareReplacement Part for OEM...

Drag Specialties - 35160199 - Tour-Pak® Lock - FL '92-'13FeaturesLock kit to be used with Tour-Pak®Replacement Part for OEM Number(s):5319407Specs

Drag Specialties - 35160192 - Tour-Pak® Hardware Latch Kit - FL '87-'13FeaturesLatch kit to be used with Tour-Pak®Self-tapping screws and blue thread locker included; these are to be used for a more...

Drag Specialties - 35160193 - Tour-Pak® Hardware Tether Kit - FL '87-'13 Features Tether kit to be used with Tour-Pak® Specs

Drag Specialties - 35160191 - Tour-Pak® Hardware Hinge Kit - FL '87-'13FeaturesHinge kit to be used with Tour-Pak®Replacement Part for OEM Number(s):5344787,8500A,9096463Specs

Drag Specialties - 24041047 - Speed Nut - 4-PackFeaturesOE replacementSpecsColor/FinishSilver<

Drag Specialties - 24020162 - Cover - Bolt - Deep - Hex - BlackFeaturesDesigned to fit stock-style, 3/4" front axles with 7/8" head and 1/2" hex nut (3/4" wrench size)Attach with silicone (silicone...

Drag Specialties - 24020073 - Head Bolt Covers - Chrome - 4 PackFeaturesPolished and buffed to a mirror-like finishQuality chrome plated steel bolt coversMade in the USASpecs

Drag Specialties - 24010851 - Screws with/Washers - Damper TubeFeaturesKit includes two black socket-head bolts and two copper washersReplacement Part for OEM Number(s):4540575ASpecs