Super Glide FXR

FXR horn mount bracket is the later version with a zinc plated finish. Tech Notes: Suggested to use with #33-2116 Replica Replacement Horn Black Fitment: FXR 1984-1994

Exhaust bracket for FXR models features a raw finish. Support bracket is welded to the frame to house the isolator block available separately. *NOTE: Must order hardware separately. Fitment: FXR...

FXR exhaust mount bracket. FXR exhaust mount bracket is mounted with (2) 7/16-20x1* pivot bolt cap screws. Our bracket mounting block can be bolted on to the opposing side using (2) 5/16-24x 5/8...

Battery strap clamp for FXR models features a black finish. Includes nut that is welded in place. Use with 1/4 x 20 bolt 1-1/2 inch hex head and 1/4 x 20 jam nut. Fitment: FXR 1984-1988 FXR 1990-1994

Rear exhaust bracket is zinc plated and for use with FXR models. *NOTE: Must order additional hardware: 5/16 inch x 3/4 inch x 1 inch spacer 5/16 inch-18 x 2 inch and 5/16 inch-18 x 1-3/4 inch allen...

FXR pipe bracket kit includes a raw weld on type bracket and an ISO mount block. *NOTE: Bracket must be welded on. Fitment: FXR 1982-1994

Silver dash panel decal set. Sold as a 2 piece set. Fitment: FXR 1982-1994

Sold as a pair. Fitment: FXR 1982-1994

Rear axle adjuster has a 3/4 inch inner diameter and includes heavy pull blocks and two 1/4 inch-20 x 2 inch full thread allen cap screws. Fitment: FXR 1982-1994

Side cover for a 5-speed transmission clutch features a black finish. Fitment: FXR 1987-1994

WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR brake plunger kit is a three piece kit that includes a plunger rod end brake plunger end and hex nut in a zinc finish. Fitment: FXR 1987-1994

FXR shifter shaft bushing includes 4 o-ring alloy type with two bronze bushings on each end. Sleeve is used to replace the stock plastic part. Fitment: FXR 1984-1994

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

FXR frame side cover set is constructed of black ABS plastic with vented panels. Sold as a pair. Requires (4) 1/4 inch-20 x 1-3/4 inch allen bolts and (4) 1/4 inch flat washers. Tech Notes: Required...

Axle spacer front for the right side and has an overall length of 1/2 inch. Measurements: Inner Diameter: 3/4 inches Fitment: FXD 1991-1996 FXR 1984-1994 XL 1986-2025

Pro-One - Solid Riser Bushing Kit Features: CNC-machined from billet aluminum Removes handlebar slop associated with tall risers and handlebar setups

Pro-One - Steering Stem Bolt fits '99-'05 FXD & '88-'22 Sportster Models (Except RH Sportster) Features: Replaces stock steering stem hardware Note: Replacement for Pro-One Triple Tree...

James Gaskets 39mm Fork Seal Backup Washers for 1987-2019 Sportster, 1991-2005 Dyna & FXR Fits: 91-98 FXD, L87-99 FXR, 99-05 FXD and L87-22 XL with 39mm forks. Full year/model list is on the Fitment...

James Gaskets - JGI-18633-48-KF - Tappet Block Gasket - Fits '48-'99 Big Twin Models (.020” Foamet®) - Pair Fits: '48-'99 Big Twin Models (.020” Foamet®). Full year/model list is on the Fitment tab...

James Gaskets Lower Rocker Cover Gasket - Left or Right for 1984-1999 Evo Big Twin Fits: 1984-1999 Evo Big Twin. Full year/model list is on the Fitment tab. Beaded paper lower rocker cover gasket...

James Gaskets MLS Head & Base Gasket Kit - Standard Bore for 1984-1999 Evo Big Twin Fits: 1984-1999 Evolution Big Twin, standard bore (0.045" steel head gaskets, steel base gaskets). Full year/model...

James Gaskets Wheel Bearing Oil Seals - 0.410" for 1984-1999 Evo Big Twin & 1984-1985 Sportster Fits: 1984-1999 Evolution Big Twin and 1984-1985 XL (catalog), with more models listed on the Fitment...

James Gaskets Top Rocker Cover Washer Set - Copper for 1984-1999 Evo Big Twin Fits: 1984-1999 Evo Big Twin. Full year/model list is on the Fitment tab. Copper washers for the top rocker cover bolts...

James Gaskets Top Rocker Cover Washer Set - Fiber for 1984-1999 Evo Big Twin Fits: 1984-1999 Evo Big Twin. Full year/model list is on the Fitment tab. Fiber washers for the top rocker cover bolts on...

James Gaskets Top Rocker Cover Washer Set - Rubber for 1984-1999 Evo Big Twin Fits: 1984-1999 Evo Big Twin. Full year/model list is on the Fitment tab. Rubber washers for the top rocker cover bolts...

James Gaskets Fifth Gear Retaining Ring for Big Twin & Sportster 5-Speed Transmissions Fits: Big Twin & Sportster 5-Speed Transmissions. Full year/model list is on the Fitment tab. The retaining ring...

James Gaskets Cam Change Gasket & Seal Kit with Metal Cam Cover Gasket for 1970-1992 Big Twin Fits: 1970-1992 Big Twin. Full year/model list is on the Fitment tab. All the gaskets, seals, O-rings and...

James Gaskets Rubber Rocker Box Gasket Kit for 1984-1991 Evo Big Twin Fits: 1984-1991 Evo Big Twin. Full year/model list is on the Fitment tab. Silicone-beaded paper rocker base gaskets, rubber...

James Gaskets Cork Rocker Box Gasket Kit for 1984-1991 Evo Big Twin Fits: 1984-1991 Evo Big Twin. Full year/model list is on the Fitment tab. Complete cork rocker box gasket kit for the early Evo:...

James Gaskets 39mm Fork Dust Seal for 1987-2022 Sportster, 1991-2005 Dyna & FXR Fits: 91-98 FXD, 91-99 FXR, 99-05 FXD and L87-22 XL with 39mm forks (except RH Sportster). Full year/model list is on...

James Gaskets Standard Bore Head & Base Gasket Kit - 0.045" Black PTFE for 1984-1999 Evo Big Twin Fits: 1984-1999 Evolution Big Twin, standard bore. Full year/model list is on the Fitment tab...

James Gaskets Carburetor to Intake Manifold Seal for 1988-2006 Sportster & 1990-2006 Big Twin Fits: 1988-2006 XL/Buell and 1990-2006 Big Twin with the Keihin CV carb. Full year/model list is on the...

James Gaskets Big Bore Head & Base Gasket Kit - 3.625" Bore for 1984-1999 Evo Big Twin Fits: 1984-1999 Evolution Big Twin with 3.625" big bore cylinders. Full year/model list is on the Fitment tab...

James Gaskets - JGI-16779-99-X - 1 Piece Lower Rocker Housing Gasket - Fits '86-'22 Sportster Models (Except RH Sportster - Pair Fits: '86-'22 Sportster Models (Except RH Sportster. Full year/model...

James Gaskets - JGI-16777-94-S - 3.625" Big Bore Metal Base Gasket - Fits '84-'99 Evolution Big Twin Models - Pair Fits: '84-'99 Evolution Big Twin Models. Full year/model list is on the Fitment tab...

James Gaskets Primary Inspection Cover Seal - Molded Rubber with Metal Insert for 1965-1999 Big Twin, 1999-2006 Dyna & Softail Fits: 1965-1999 Big Twin inspection cover, 2000-2006 Softail and...

James Gasket - 39 mm Fork Seals fits '99-'05 Dyna, 'L87-'22 Sportster Models (Except RH Sportster (OEM #45378-87)) Features: High-quality replacement components Available in dealer packs of ten...