Sportster XLH 883 Standard

19" X 2.5" Front dual or single disc wheel includes a chrome hub with internals, a chrome drop center rim, and 40 twirled chrome spokes assembled.NOTE: All spokes on wheel need to be inspected and...

16" x 3.00" rear wheel with 40 twirled spokes include chrome hub with internals, rim and twirled spokes assembled.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Replica 21" x 2.15" single or dual disc front wheel features a chrome hub with all internal bearings installed, 40 polished stainless steel spokes and a chrome rim.Spoke wheel uses a 3/4" axle...

19" x 2.50" single or dual disc front wheel features a chrome hub with all internal bearings installed, 40 polished stainless steel spokes and a chrome drop center rim.This wheel is tube type. ...

These rear wheel assemblies start with a 40 hole 18" x 4.25" chrome rim, 40 chrome spokes and a rear hub with internals. Accepts a 130-140 tire size.NOTE: All spokes on wheel need to be inspected and...

Chrome rear wheel features a 16" X 3.00" chrome rim with small center hole for valve stem, chrome hub with internals, and 40 stainless steel spokes.The flange of the hub measure 7" between each...

16" x 3.0" rear wheel assembly includes an aluminum chrome hub, a chrome profile smoothie rim and 40 chrome spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

XR Front or rear wheel includes a chrome hub with internals installed stainless steel spokes and nipples, a chrome 19" x 3.0" steel rim and a rim strip. For use with a dirt tire.Features a 8.5mm...

V-Twin - 52-0301 - 19 inch X 2.50 inch Wheel Rim and Spoke Kit ChromeDescriptionRim and spoke set include 19" x 2.50" front rim with 40 chrome spokes with 40 spoke nipples.Rim is steel and drop...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

Chrome rear wheel features a 16" X 3.00" chrome rim with small center hole for valve stem, chrome hub with internals, and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE:...

Wheel features a 16" x 3.5" chrome rim, a chrome hub with internals and 40 stainless spokes.Wheel is laced and trued. **NOTE: All spokes on wheel need...

Wheel features a 16" x 3.5" chrome rim, a chrome hub with internals and 40 chrome spokes.Wheel is laced and trued. **NOTE: All spokes on wheel need to...

18" X 2.50" rear wheel assembly has a chrome rim, 40 spokes and hub with internals.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. Fits:FXRS...

21" x 2.15" Replica single disc front wheel features a chrome hub with internal bearings installed, 40 stainless steel spokes, and a chrome rim.**NOTE: All spokes on wheel need to be inspected and...

19" x 2.50" Replica single disc front wheel features a chrome hub with all internal bearings installed, 40 polished stainless steel spokes and a chrome drop center rim.**NOTE: All spokes on wheel...

21" x 2.15" Replica single disc front wheel features a chrome hub with all internal bearings installed, chrome spokes, and a chrome rimAll spokes on wheel need to be inspected and re-torqued after...

19" x 2.50" Replica single disc front wheel features a chrome hub with all internal bearings installed, 40 chrome spokes, and a drop center chrome rimFeatures a 3/4" bearing. **NOTE: All spokes on...

Wheel features a 16" X 3.00" chrome rim, chrome hub with internals, and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE: 32mm on the pulley side, valve stem side. 27mm...

21" x 2.15" Replica single or dual disc front wheel features chrome hub with all internal bearings installed, 40 chrome spokes, and a chrome rim.**NOTE: All spokes on wheel need to be inspected and...

19" x 2.50" Replica single or dual disc front wheel features a chrome hub with bearings installed, chrome spokes, and a chrome drop center rim.**NOTE: All spokes on wheel need to be inspected and...

200 XL rigid frame features a 40  rake with a 3" stretch. Frame can be set up for 1957-1985 type Ironhead motors.Frame will accept 1" neck cups, Wide Glide fork assembly, stock length kickstand and...

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

Engine bar features 1-1/4" tubing and foot rests with rubber pads. Hardware is not included. This will not work with forward controls.**WARNING: This engine/frame bar may provide limited leg and...

D+D XL raw rigid frame features a 1-1/4" thick wall, DOM steel tubing with 1-1/2" backbones, 30  rake and 0  stretch. This rigid frame is a basic starter frame.Frame will require custom 3/4" rear...

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount...

V-Twin - 51-0484 - XL Hardtail Axle Plate SetDescriptionRaw set of right and left axle plates for Sportster hardtails, features 7/8" slots on both sides. Fits:XL 1982-UPAdditional Information<

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

V-Twin - 51-0066 - Frame Motor Mount Tab RawDescriptionFrame motor mount tab must be welded on and features raw casting. Fits:XL 1982-UPAdditional Information

Rear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rigid frame neck is for the XL single loop rigid bobber frames. Fits:XL 1986-2003Additional Information UOM1 - EA

Rear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA <

Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. ...

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Drag Specialties - DS325205 - Upper Belt Guard - '91-'99 XL - ChromeFeaturesSimple bolt-on installationHigh-quality chromed stamped-steel upper rear belt guardReplacement Part for OEM...

Drag Specialties - DS317468 - Battery Strap - '73-'86 FX / '82-'97 XLFeaturesHigh-quality replacement battery strapsMeet or exceed OEM specificationsReplacement Part for OEM...

Drag Specialties - DS190874S - Bolt Kit - Complete Motor - Smooth/Socket-Head - '91-'03 SportsterFeaturesIncludes all necessary bolts to hold the engine togetherMade in the USASpecs