1992

FXR steel shifter lever features a chrome plated finish. Fitment: FXR 1982-1994

FXR stainless steel heel toe shifter lever is a one piece deseign for 5-speed models with mid controls. Includes 2 rubber pads. *NOTE: The distance from the center of the spline to the very end of...

FXRP chrome D-shaped footboards with ISO-pads installed. Footboard set is for use on FXRP and FXD models with footboards. Specifically for FXRP with footboards. Mounting bracket features 10 inch...

FXR kickstand mount bracket features a raw finish and must be welded in place. Accepts stock kickstand pin and spring. Fitment: FXR 1982-1994

FXE rear exhaust mount kit includes a black bolt on style rear pipe bracket and zinc hardware. *NOTE: The bracket bolts to the pivot bolt hex bolts to replace the weld-on bracket. Fitment: FXR...

Zinc plated FXR front exhaust mount bracket. . Fitment: FXR 1986-1994

FXR horn mount bracket is the later version with a zinc plated finish. Tech Notes: Suggested to use with #33-2116 Replica Replacement Horn Black Fitment: FXR 1984-1994

Exhaust bracket for FXR models features a raw finish. Support bracket is welded to the frame to house the isolator block available separately. *NOTE: Must order hardware separately. Fitment: FXR...

FXRS raw steel dash bracket must be welded in place. Suggested to use with two 1/4 inchx 20 speed nuts. Tech Notes: Suggested to use with #39-0424 FXD-FXR Dash Panel Chrome Fitment: FXRS 1988-1994

FXR exhaust mount bracket. FXR exhaust mount bracket is mounted with (2) 7/16-20x1* pivot bolt cap screws. Our bracket mounting block can be bolted on to the opposing side using (2) 5/16-24x 5/8...

Battery strap clamp for FXR models features a black finish. Includes nut that is welded in place. Use with 1/4 x 20 bolt 1-1/2 inch hex head and 1/4 x 20 jam nut. Fitment: FXR 1984-1988 FXR 1990-1994

Rear exhaust bracket is zinc plated and for use with FXR models. *NOTE: Must order additional hardware: 5/16 inch x 3/4 inch x 1 inch spacer 5/16 inch-18 x 2 inch and 5/16 inch-18 x 1-3/4 inch allen...

FXR pipe bracket kit includes a raw weld on type bracket and an ISO mount block. *NOTE: Bracket must be welded on. Fitment: FXR 1982-1994

FXR chrome 35mm flat top stem nut fits 35 inch and 39 inch fork stems. Tech Notes: Suggested to use with #24-0827 Lower Triple Tree Chrome. Fitment: Fx 1978-1984 FXR 1982-1994 XL 1978-1987

Silver dash panel decal set. Sold as a 2 piece set. Fitment: FXR 1982-1994

Sold as a pair. Fitment: FXR 1982-1994

Rear axle adjuster has a 3/4 inch inner diameter and includes heavy pull blocks and two 1/4 inch-20 x 2 inch full thread allen cap screws. Fitment: FXR 1982-1994

Side cover for a 5-speed transmission clutch features a black finish. Fitment: FXR 1987-1994

WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR brake plunger kit is a three piece kit that includes a plunger rod end brake plunger end and hex nut in a zinc finish. Fitment: FXR 1987-1994

FXR shifter shaft bushing includes 4 o-ring alloy type with two bronze bushings on each end. Sleeve is used to replace the stock plastic part. Fitment: FXR 1984-1994

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

FXRP shifter rubber set for heel toe shifter levers features a black finish and is the slip on type. Sold as a pair. Fitment: FXRP 1985-1994

FXR frame side cover set is constructed of black ABS plastic with vented panels. Sold as a pair. Requires (4) 1/4 inch-20 x 1-3/4 inch allen bolts and (4) 1/4 inch flat washers. Tech Notes: Required...

Axle spacer front for the right side and has an overall length of 1/2 inch. Measurements: Inner Diameter: 3/4 inches Fitment: FXD 1991-1996 FXR 1984-1994 XL 1986-2025

This replaces the original plastic unit on the 1982-up models. Thread is 3/8 inch x 28 TPI. Holes on the back measure starting with the small one closest to the bottom and working to up: #8-32* 5/16...

Pro-One - Solid Riser Bushing Kit Features: CNC-machined from billet aluminum Removes handlebar slop associated with tall risers and handlebar setups

Pro-One - 41 mm Fork Tube Assemblies fits '00-'17 FXST/​FLST, '99-'05 FXDWG Models (Except FXSTD) Features: Assemblies come complete with fork tubes, springs, damping rods, bushings, clips,...

Pro-One - Strut LED Marker Light fits '00-'17 Softail Models Features: CNC machined from solid billet aluminum, carefully polished, then triple-chrome plated Include both smoked and amber...

Pro-One - Steering Stem Bolt fits '99-'05 FXD & '88-'22 Sportster Models (Except RH Sportster) Features: Replaces stock steering stem hardware Note: Replacement for Pro-One Triple Tree...

James Gaskets 39mm Fork Seal Backup Washers for 1987-2019 Sportster, 1991-2005 Dyna & FXR Fits: 91-98 FXD, L87-99 FXR, 99-05 FXD and L87-22 XL with 39mm forks. Full year/model list is on the Fitment...

James Gaskets Starter Motor Yoke O-Rings for 1991-2008 Sportster & 1999-2008 Twin Cam Fits: 1991-2008 Sportster & 1999-2008 Twin Cam. Full year/model list is on the Fitment tab. Smooth O-rings for...

James Gaskets - 16774-96-XT1 - Cylinder Base Gaskets - Fits '86-'22 XL/XR Models (Except RH Sportster) (.016" Rubber Coated Metal w/ Bead) - Pair Fits: '86-'22 XL/XR Models (Except RH Sportster) (...

James Gasket - Cylinder Base Gaskets fits '86-'22 XL/XR Models (Except RH Sportster) (.010" Rubber Coated Metal w/ Bead) (OEM #16774-96) Features: Top-quality Genuine James gaskets

James Gaskets - JGI-18633-48-KF - Tappet Block Gasket - Fits '48-'99 Big Twin Models (.020” Foamet®) - Pair Fits: '48-'99 Big Twin Models (.020” Foamet®). Full year/model list is on the Fitment tab...

James Gaskets Compressed Wire Exhaust Port Gaskets for 1984-2021 Big Twin & 1986-2020 Sportster Fits: 1984-1999 Evolution Big Twin (catalog), plus the 1999-2021 Big Twin and 1986-2020 Sportster...

James Gaskets Copper Crush Ring Exhaust Port Gaskets for 1986-2020 Sportster & 1999-2020 Big Twin Fits: 1986-2020 Sportster & 1999-2020 Big Twin. Full year/model list is on the Fitment tab. Copper...

James Gaskets Lower Rocker Cover Gasket - Left or Right for 1984-1999 Evo Big Twin Fits: 1984-1999 Evo Big Twin. Full year/model list is on the Fitment tab. Beaded paper lower rocker cover gasket...